Latest Products

Classic, seventies windbreaker in the original MARTINI RACING design.  Woven MARTINI RACING front stripe, embroidered MARTINI RACING logo patch on the chest. MARTINI RACING lettering in white on the back.  Light upper with lining in contrasting red, two side pockets on the outside, zipper on the front and drawstring in the waistband.  Upper: 100% polyester  Lining: 100% polyester

2 1/2-INCH (63MM) PRECISION C SPANNER FOR All Porsche Bilstein Koni & EuroCupGT Suspension. The Pro C spanner is for the ease of adjusting on the ride height of your Porsche without damaging the aluminium platforms and locking rings. This is a drop forged professional spanner.

2 1/4-INCH (57MM) PRECISION C SPANNER FOR All Porsche Bilstein Koni & EuroCupGT Suspension. The Pro C spanner is for the ease of adjusting on the ride height of your Porsche without damaging the aluminium platforms and locking rings. This is a drop forged professional spanner.

OEM Martini Indoor Car Cover. All GT3 Models & cars with GT3 & GT2 style Aero Kits Fitted. Please specify Model when ordering. Please allow 5 -7 days for shipping.

Classic knit cap, as worn by the MARTINI RACING team in the Sports Car World Championship and the World Rally Championship in the 1980s and 90s. Classic blue with Martini Stripes and original, stitched Martini Racing Patch. Material: 50% Merino wool / 50% Acrylic. Made in the EU

Retro quilted jacket in the famous MARTINI RACING colours, inspired by the 80's team vest. Light and warm. Embroidered original Martini Racing patch and stitched woven stripes on the chest. Two hand pockets with zipper, one inside pocket. Upper: 100% Polyester Lining: 100% Polyester Padding: 100% Polyester

Kit (set of 2) Left & Right Sides. Note; some modifications may be required on installation depending on Model. All Cars 2012 -Onwards

Spax Coil Over Kit for all 924 924S 924 Turbo 1977 -1989 & Early 944 & 944 Turbo models 1982 -1986 Spax RSX Coilover Suspension Lowering Kit - RSX124 Height And Damping Adjustable Coilover Kits Stainless Steel Height Adjusters Krypton Gas Pressurised Dampers Race Type 2.25 Inch Coil Springs High Quality Components Used Throughout Spax RSX Coilover Suspension Kit - Adjustable Ride Height, Adjustable Damping Spax RSX Coilover Suspension Kits contain uprated, 28 stage on-car adjustable dampers with stainless steel height adjustable platforms, matched to a set of chrome-silicon race type, uprated coil springs. Spax engineers have developed these kits to produce total control and razor sharp handling. The height adjustment on the RSX kits allows you to set the corner weights of your car, which means you can control the weight distribution, improving the balance and the grip of the car. The adjustable Krypton gas filled dampers allow the suspension set up to be altered perfectly to suit personal preferences of driving style. The result is maximum cornering speed and traction, minimum braking distance and roll. Low speed performance is compliant and offers great feedback, high speed performance is ultra stable, fade free and therefore significantly improved.

Traditional six-panel baseball cap. With embroidered 944 logo and Pasha design on the underside. - 100% cotton - In grey/red

With 928 3D logo and pinstripe design underneath the visor. Rear panels made of mesh. Snap-back fastener with embossed PORSCHE logo. - Material 1: 60% cotton, 40% polyester - Material 2: 100% polyester

OEM Race part for all cars 1982 -Onwards Length; 75mm through bumper boss + strap (90mm long)

Polar Blast is a snow foam available in a 2.5 litre which can be applied using a pressure washer or foam gun as a pre-wash stage. It covers the vehicle in a rich blanket of foam that clings to paintwork to gently loosen dirt and heavy soiling prior to shampooing.  This reduces the risk of scratches and swirl marks caused by a sponge or wash mitt moving over heavy contamination. Polar Blast can be used instead of a shampoo as long as the vehicle isn't heavily soiled, just be sure to rinse the vehicle with water first to remove the top layer of dirt. Its pH neutral formulation will not remove any existing layers of polish or wax.  As used by Porscheshop.

Your vehicle is under constant attack from airborne contaminants. Many of these are tiny particles of iron that appear as specks on paintwork and brake dust on wheels, dulling their shine. The active ingredients in Magma turn red as they react with these iron particles to safely loosen them from the surface to be easily rinsed away.

Porsche Leather Interior Care Kit  Cleaning and care product set for the Porsche leather interior in a handy bag. Includes: - leather cleaner (100 ml),  - leather conditioner (100 ml),  - sponge and cloths For UK supply only

OEM Light Kit. Can be Retro Fitted to Earlier cars using 2017_On Rear Bumper

Retractable Sturdy Strap Bar & 4x Slide in Strap Base Locks. Simple Lock In Multi purpose kit allows for single side storage stability or Full cross area adjustment. The 4x strap base hook locks can be used in conjunction with straps & Bunjies ( Not Included ) High Quality Heavy Duty Kit with Sturdy Storage Case.

EuroCupGT High Quality Stainless Steel Detailed bolt on Tail Pipe

Set of bulbs and fuses (12 Volt); for use on Porsche 911 (1974 to 1989). The packaging comprises a white Porsche Classic designer metal box with foam inserts. The set comprises: 2x high beam/low beam light (H4 60/55W), 2x indicator light, reversing light (21W), 2x position light (4W), 2x tail/brake light (21/5W), 1x licence plate light (5W), 1x fog light (18W), 2x safety fuse (5A), 2x safety fuse (8A), 2x safety fuse (16A), 2x safety fuse (25A).

Set of bulbs and fuses (12 Volt); for use on Porsche 944 (1982 to 1991). The packaging comprises a white Porsche Classic designer metal box with foam inserts. The set comprises: 2x high beam/low beam light (H4 60/55W), 2x indicator light, tail/brake light, reversing light, fog light (21W), 2x licence plate light, front position light (4W), 2x rear position light (10W), 2x side indicator (4W), 2x safety fuse (8A), 2x safety fuse (16A), 2x safety fuse (25A), 2x blade-type fuse (7.5A), 2x blade-type fuse (15A), 2x blade-type fuse (25A), 1x blade-type fuse (30A).

Set of bulbs and fuses (12 Volt); for use on Porsche 964 (1989 to 1994). The packaging comprises a white Porsche Classic designer metal box with foam inserts. The set comprises: 2x high beam/low beam light (H4 60/55W), 2x indicator light, reversing light, fog light (21W), 2x tail/brake light (21/5W), 1x licence plate light (5W), 1x licence plate light Turbo/RS (5W), 2x front position light (4W), 2x side indicator (5W), 2x blade-type fuse (7.5A), 2x blade-type fuse (15A), 2x blade-type fuse (25A), 2x blade-type fuse (30A), 2x blade-type fuse (40A).

Set of bulbs and fuses (12 Volt); for use on Porsche 968 (1992 to 1995). The packaging comprises a white Porsche Classic designer metal box with foam inserts. The set comprises: 2x high beam/low beam light (H4 60/55W), 2x indicator light, reversing light, fog light (21W), 2x tail/brake light (21/5W), 1x licence plate light (5W), 2x front position light, side indicator (5W), 2x rear position light (5W), 2x blade-type fuse (7.5A), 2x blade-type fuse (15A), 2x blade-type fuse (25A), 1x blade-type fuse (30A), 1x blade-type fuse (40A).

Set of bulbs and fuses (12 Volt); for use on Porsche 993 (1994 to 1998, excluding Litronic). The packaging comprises a white Porsche Classic designer metal box with foam inserts The set comprises: 2x high beam/low beam light (H1), 2x indicator light, reversing light, fog light (21W), 2x tail/brake light (21/5W), 1x licence plate light (5W), 2x position light (4W), 2x side indicator (5W), 1x yellow indicator light (21W), 2x blade-type fuse (7.5A), 2x blade-type fuse (15A), 2x blade-type fuse (25A), 2x blade-type fuse (30A).

Key strap inspired by the look of the safety belts in Porsche racing cars. With PORSCHE MOTORSPORT badges and safety closure. - Size adjustable - Strap: 100 % polyester - In Black/Red

Hooded bathrobe in MARTINI RACING® design. With two patch pockets and high-quality MARTINI RACING® details, such as embroidery and a webbed patch on the upper sleeve. Belt embroidered with PORSCHE logo. Outer made of soft velour, inner made of terry cloth. - 100% cotton - In dark blue

Made as per the std 911R hinge but have slightly bigger body attachment , heaver s/s connections between parts. Made for std metal deck lids , whale tails , duck tail lids.

911 R / ST / RS / RSR style Rear Shift linkage cover Fits All Models 1965-1989. Material; 3mm Alloy.

911 R / ST / RS / RSR R-Gruppe Style Left Hand Drive floor boards Made as per 911R floor board but out of aluminium for the R-Gruppe look.

911 R / ST / RS / RSR MFI Thermostat Cold Start Delete Plate with manual adjust Running Screw. Allows the removal of the cold start thermostat. Laser cut Alloy with 304 Stainless fixings

911 R / ST / RS / RSR ST-Classic R style floor board Made from top grade marine ply. laser cut for perfect lines. Note; Designed for Left Hand Drive cars Only. Straight replacement for stock Old school board.

HID Light Kit for All Front Bumper Fog & Spot Lights.

Set of two fine-knit socks in two designs: plain and Pasha, each featuring the PORSCHE logo. Pasha design inspired by the interior of the Porsche 944 from 1982.  - Unisex - 88% cotton, 10% polyamide, 2% elastane - In black/grey/red

New Old Stock OE Porsche 5 speed Boxster 2.5 Tiptronic Gearbox. Fitted and tested with delivery mileage. Collection from DY10 4JB

Good Used 996 Cabriolet Hardtop in silver with Heated Rear Glass Screen. 1997 -2004. Can be fitted to a 997 Model 2005 -2012 with Porsche adapter kit ( Not Included ) Please Note. This is collection Only from Worcestershire DY10 4JB We Also Have a Black Hard Top if it Helps ? Collection, payment and fitting can be arranged on site provided we have notice. 0121 585 6088 For 997 fitting Please phone for a fitted cost before buying. Note this is good used Roof and will have some storage marks & scratches so viewing is recommended before buying. Note We also Have a Black Roof Also

911 R / ST / RS / RSR R-Gruppe Style Right Hand Drive floor boards Made as per 911R floor board but out of aluminium for the R-Gruppe look (Pair)

911 R / ST / RS / RSR Left Hand Aluminum Foot Rest in a style to match our 911R foot boards. 2.5mm sheet. Rivet or bolt on.

964 / 993 RHD Drivers side floor board. R styled floor boards in Aluminum for Manual cars

Replaces standard Support bar for clean light weight & looks. Note. Not for 912 or Cabriolet models.

R / ST / RS / RSR - Spark Plug clamps Set (6) Stainless Steel Based on the original R / RSR style design, updated for better lasting ,ease of use and clean look. Made from 306 stainless steel.

R / ST / RS / RSR - Spark Plug Wire Holder Set (6) Stainless Steel Based on the original R / RSR style design. U updated for better lasting, ease of use and clean look. Made from 306 stainless steel.

Classic Rally / Race style spare tyre harness as seen in R / ST / RS and RSR's. Made from the original style webbing with English leather straps and brass rivets.

Early repoduction LWT seat brackets. Ideal for the Classic Recaro low back or Shell Back Seats and Club Sport Racing Seats. Sold per seat (1 Pair)

911 R / ST / RS / RSR Front Windscreen Securing straps. Laser cut alloy. Folded to match the Windscreen profiles. Blank ready to be drill to suit your type of fastenings. Ideal for Race & Rally Lexon & Perspex Windscreens

911 R / ST / RS / RSR Front Heater Box Delete / block off plates. Kit includes; 2x center covers , 2x outer covers & 4x gaskets.

911 R / ST / RS / RSR Rear shock tower support brackets ready to weld on to the Rear shock towers. Made from an original pattern but contoured for better fitment. Each set will need a slight tweek to match the location as all early 911's are hand made so no two cars are the same. Set comes as 4 parts (Two pairs / 1 car)

Durable padded nylon bag containing a carefully selected range of high quality care products specially approved for Porsche. Includes shampoo, hard wax, interior and exterior glass cleaner, paintwork polish, insect remover and plastic dressing

EuroCupGT Billet Alloy Center lock look center caps, For that GT3 & Super Cup Car racing look, these are a direct fit to all Porsche & aftermarket wheels that accept a Porsche 72mm wheel cap. Anodized aluminum with security socket head fitting. Price for a set of 4

Gain of nearly 25 hp K&N tested a 2007 Porsche 911 GT3 RS 3.6L on our in-house dynamometer. An increase of 24.65 hp @ 6726 RPM. Dramatically reduces intake restriction & smooths & straightens airflow. So the engine uses a larger volume of air than the OEM assembly. More air means more power & torque. System uses a conical shaped, carbon fiber top, high-flow air filter & powder coated two-piece aluminum heat shield. For 3.6 & 3.8 GT3 Models

EuroCupGT Large Stainless Steel Polished tailpipes will fit all models with standard exhaust system both Carrera 2/4 & Carrera 2S & 4S models. Note; Not for cars with OE sports switchable system. Also Ideal for standard Carrera cars with the EuroCupGT sports rear boxes (also listed in this section).

EuroCupGT Porsche Cayenne Alloy Pedal Set & Foot Rest, fits all Automatic models V6, V8, Diesel, Turbo, S, GTS & Hybrid. Fits all Model years 2003 to 2014 ( Tiptronic cars only )

Porsche Cabriolet boot Seal for; 944 Turbo 944S2 & 968. Fits all Cabriolet models 1989 to 1995

Timeless and sporty Porsche models in futuristic megacities, features collectable artwork . The new Porsche calendar for 2013 gives you 12 reasons to start looking forward to the future now. Comes with an exclusive collectors coin. Dimensions: 59 x 55,5 cm.

New to market, Carband Tm is unique in its application, offering 360-degree protection from minor bumps, scrapes and scratches from bikes & other Garage stored items. Carband follows the form of your car & is self breathing and can be applied on a wet or damp car & it will self dry. The unique elastic system can also be used both in & out doors as a car cover securing system removing the need for tie downs or bunji straps. Carband is available for all models, and vehicles of all sizes. Please specify model when ordering

Porsche Chrome plastic Self Adhesive Letters to fit Rear and Lid.

Porsche key blank with crested head for All 924, 944 & 968 Models

Baseball cap in white with Porsche Crest. Metal buckle with Porsche logo.   One size fits all.  100% Cotton.    Official Porsche Selections, trade enquiries welcome.   International customers welcome.

Leather Porsche crested key case. Genuine Product. NB: Key not included

OEM 996 / 986 Boxster Center Consol with Ash Tray Delete, Rubber Mat & Handbrake Finisher, (Tray replaces ashtray). Please state colour & vehicle model when ordering. Please allow 7 -10 days for UK delivery & 14 -21 days for Overseas. Note Other Colours can be ordered with Paint Code.

Crested Polo shirt. In White 100% Cotton Genuine Merchandise. Please Note - When ordering from US, sizing is EU. Therefore, order 1 size above your usual size (EG: EU Large is equal to US Medium).

OE Porsche Lockable carrier for all standard bikes up to a maximum frame tube diameter of 100mm. All Wheel Sizes. Self Adjusting Frame Holder. Quick Release Wheel Straps. Up to three carriers can be mounted on the roof transport system.

OE Porsche Bumper Rubber to fit all models 924 and 944 1976 -1992 (excluding 944 Turbo and 944 S2)

Grey acidic primer for the promotion of adhesion to metal surfaces & plastics. For the repair of small rub-throughs to bare metal or the complete coating of new panels & Parts. We are not able to send Aersols outside the UK due to restrictions from mail services & couriers

Porsche Selections Crested Polo shirt. Black, 100% Cotton. Please Note - When ordering from US, sizing is EU. Therefore, order 1 size above your usual size (EG: EU Large is equal to US Medium).

Contains everything to upgrade headlights to HID Xenon. Bulbs, wires, brackets, & latest generation digital ballasts. The light output is the same as any OEM HID light system. This product has been tried & tested with excellent results. Use 1 set for either your Main Beam or Dipped Beam. ( Use x2 sets for both if required )

Contains everything to upgrade headlights to HID xenon. Bulbs, wires, brackets, & latest generation digital ballasts. The light output is the same as any OEM HID light system. This product has been tried & tested with excellent results

Performance Sprung Clutch Drive Plate. Uprated for All standard & Turbo Applications. Ideal for Road & Race. 240mm Diameter. Standard Fit for; 924 & 944 Turbo, 911 3.2L G50 Carrera, 930 Turbo 3.0L & 3.3L, 964 & 993 RS, & 996 / 997 GT3 RS. Can also be used with Single Mass Flywheels on all; 968, 964, 964 Turbo, 993 & 996 / 997 Turbo Models 1974 -2012

OE Porsche 911 key blank with Porsche Logo head

Mobil Oil pouch to hold a one litre bottle of oil, has velcro strips on the back so it attaches to boot carpet side. Also has a dipstick wipe included

Aluminium Look finish Enhances the distinctive styling of the Car, Price per pair, For Models 2009 onwards

Polo shirt in a Porsche Racing design - With 3 buttons and reflective tape on the shoulder seams - 100% cotton - In black/grey 

Functional polo shirt - Made of comfortably lightweight mesh material - Fast drying and breathable - 100% polyester - In aqua blue

Classic 911 dial face watch, water resistant with a brushed stainless steel "screw back" body. This eye catching watch is an ideal gift for any Porsche enthusiast and is practical enough for everyday wear. Watch face 37mm diameter, 10mm depth. This is an Enthusiasts Watch, not a Designer Watch.

Classic 911 dial face watch, water resistant with a brushed stainless steel "screw back" body. This eye catching watch is an ideal gift for any Porsche enthusiast and is practical enough for everyday wear. Watch face 37mm diameter, 10mm depth. This is an Enthusiasts Watch, not a Designer Watch. NB: Black Strap with White Stitching supplied.

A long lasting treatment to clean air conditioning systems and overcome bad odours

NB: In order to use this system you must be confident in using a high speed drill. The paintwork must be fully masked off to avoid damage. Note: This product is not suitable for use on glass headlight lenses. Contents: 100ml Heeadlight Restoration Compound. 1 x Drill Bit backing Plate 6 x P800 Sanding Abrasive Disc 4 x P1500 Sanding Abrasive Disc 1 x P2000 Sanding Abrasive Disc 1 x P3000 Sanding Abrasive Disc 1 x White Compounding pad 1 x Microfibre Cloth

Porsche tool set in leather case (55 pieces): ring / open-end spanner set (8 pieces), socket wrench set (30 pieces), hexagonal allen key set (9 pieces), flat-nosed round pliers, voltage tester, plastic spatula, telescopic magnet, LED head lamp, 2 pairs of gloves and microfibre cloth.

High Quality Classic Race Car Detail, turned from laminated mahogany and maple. Because timber is a natural product the colours and grain can vary slightly, thus Every gear knob is unique because of this. These are supplied pre drilled, with the hole diameter and an OE metal crush sleeve to hold the knob in place. Standard Fit on All Cars 1965-1986 Note. For G50 Carrera 964 & 993 will require adaptation

The 13 new motifs pay tribute to the motorsports roots of the current range of Porsche models.  In addition to the annual collectors coin, the calendar contains digital features that can be accessed via QR codes.  - Made in Germany

4 part stylish OEM,  LED Light Kit.

Official Martini Racing merchandise. Classic fit, with the Martini International Club logo on the chest. Martini Racing stripes logo. Made from 100 % cotton.

Foldable Metal Shovel Ideal for use in cold weather emergencies, this foldable metal shovel comes complete with an easy grip handle and solid steel blade. Stainless steel & powder coated to prevent rust. Fold away and store in handy vinyl pouch (included). Perfect emergency solution in winter weather. Dimensions: 570x145mm

Martini Racing Driver's Rally Team Bag, This is a replica from the Rally WRC of 1983. Red interior lining with zipped interior pocket. Removable shoulder strap Colour: White/Blue Material: 100% Polyester Dimensions: Length 56cms x Height 30cms x Width 29cms

This is the remake of the 1973 team jacket, worn by drivers and team when Martini raced with Porsche and Herbert Müller, Gijy van Lennep etc in the Carrera RSR. It has the old MARTINI RACING logo patch on the chest, and the extendable pit-pass-holder on the right breast. Upper: 100% nylon. Padding: 100% polyester. Lining: 100% polyester Please Note - When ordering from US, sizing is EU. Therefore, order 1 size above your usual size (EG: EU Large is equal to US Medium).  

In the style of the famous late 1970's / early 1980's team, A modern retro-classic. 100% cotton, Martini logo on front and back. Please Note - When ordering from US, sizing is EU. Therefore, order 1 size above your usual size (EG: EU Large is equal to US Medium).

High-end double-walled thermal beaker made of stainless steel. Capacity: approximately 450 ml. Dishwasher safe. Black high-gloss finish. Features Porsche Crest.

Inspired by the design of the central locking mechanism of the current Porsche 911 Turbo & 911 Turbo S. Heavy-duty design includes original Porsche Crest & logo, comes in a original presentation box. For opening crown caps. Dimensions: 70mm x 28mm Weight: 260g

Inspired by the design of the central locking mechanism of the current Porsche 911 Turbo & 911 Turbo S. Includes original Porsche Crest & logo. With rubber inlay for sealing the bottle. Colour: Silver/Black. Dimensions: 75mm x 40mm x 105g

OEM Martini Indoor Car Cover. All Models. Please specify Model when ordering. Please allow 5 -7 days for shipping.

Windproof, super lightweight jacket in MARTINI RACING design. With 2 hip pockets and 2 zipped breast pockets. 100% polyester. .

Replaces the standard LED tail lamps with tinted LED Lights. Adds a sportier and more up to date look to the rear of the Cayenne. Features a smoked black lense with red lights on the interior, the upper clear accent is replaced with smoked background. Fits all 2011-2015 Cayenne models. Four piece kit.