You have no items in your shopping cart.
EuroCupGT Steering & Suspension Components
EuroCupGT Steering & Suspension Components
-
350mm EuroCupGT Rear Brake kit 996 & 997 Carrera 2 S / C4 S 1998-2012
SKU:EUROGTBIGBRAKEREAR350MM
In StockEuroCupGT Porsche 350mm Rear Brake kit has been developed to be used in conjunction with your existing braking system, uses a 4 piston caliper design for even pad pressure & semi ridged floating rotor design that improves braking ability & driving experience. Kit comes complete with Stainless steel brake hoses, Fast Road / Track Grade Brake pads & all hardware. Kit will clear all 18", 19" & 20" wheels and some 17" wheels. Fits Cars; 996 Carrera C2 & C4 3.4 & 3.6 1998 -2004 997 Carrera C2 & C4 2005 -2012 Note. If you are unsure of fitment please ask before buying. Note. we also recommend professional fitting for safety reasons. -
EuroCupGT Adjustable Rear Upper Control Arm Kit 996 / 997 Carrera, GT3 & Turbo
SKU:7370
Out of StockSet of 4 Heave duty adjustable rear upper control arms. Ideal for Camber set ups and clearance, when using larger wheel & tyre sizes where Geometry is limited with standard control arms. All models 1998-2012 -
EuroCupGT Adjustable Tension Control Arms 996 Fr & Re / 986 Front & 997 Rear
SKU:EURO6435
In StockEuroCupGT uprated suspension tension bars replace the cast aluminium arms & allow for neutral adjustment when setting up your cars geometry. The rubber bushing is replaced with a Rose Joint to allow for more accurate handling. Fits the following: All 996 Models inc GT3 & Turbo Front & Rear All Boxster 986 Front Only All 997 Models inc GT3 & Turbo Rear Only -
EuroCupGT Billet Front Chassis Strength Plates Porsche 996 997 Boxster Cayman
SKU:18934
In StockThese EuroCupGT-Pro Billet Plates add Strength to the factory Wing Panel & can be used with Standard or Motorsport Top Mounts. ( Sold as a Pair ) Fits All Models 1997 -2012 -
-
EuroCupGT Rear Adjustable Tension Control Arm Porsche 986 987 Boxster Cayman -12
SKU:EURO6435BOX
In StockEuroCupGT uprated rear suspension tension bars replace the cast aluminium arms & allow for neutral adjustment when setting up your cars geometry. The rubber bushing is replaced with a rose joint to allow for more accurate handling. Fits the following: All Boxster 1997 -2012 All Cayman Models 2005 -2012 -
EuroCupGT Spring & Damper Coil Over Kit 996 C2 & GT3 / GT3RS 1998-2004
SKU:7339
In StockEuroCupGT Super Sport damper design helps eliminate discomfort resulted from bump steer on rough roads. Sports dampers enables you to adjust the ride height with a 30-way damping adjustment. Fully Top Adjustable All Round, comes with Alloy Top Mounts all round and Front Camber Adjustment Plates. Ideal for All Fast Road & Track cars For all 2 wheel drive Models -
EuroCupGT Spring & Damper Coil Over Kit 996 C4 C4S & Turbo 1998-2004
SKU:7339#C4Turbo
In StockEuroCupGT Super Sport damper design helps eliminate discomfort resulted from bump steer on rough roads. Sports dampers enables you to adjust the ride height with a 30-way damping adjustment. Fully Top Adjustable All Round, comes with Alloy Top Mounts all round and Front Camber Adjustment Plates. Ideal for All Fast Road & Track cars For all 4 wheel drive Models upto 2004 -
EuroCupGT Spring & Damper Coil Over Kit 997 C2/4 C2S/4S & Turbo Models 2005-2012
SKU:19574
In StockEuroCupGT Super Sport damper design helps eliminate discomfort resulted from bump steer on rough roads. Sports dampers enables you to adjust the ride height with a 30-way damping adjustment. Fully Top Adjustable All Round, comes with Alloy Top Mounts all round and Front Camber Adjustment Plates. Ideal for All Fast Road & Track cars For all 2 wheel drive Models -
EuroCupGT Spring & Damper Coilover Kit All 986 Boxser & Boxster S 1997-2004
SKU:7340
In StockEuroCupGT Super Sport damper design helps eliminate discomfort resulted from bump steer on rough roads. Sports dampers enables you to adjust the ride height with a 30-way damping adjustment. Fully Top Adjustable All Round, comes with Alloy Top Mounts all round and Front Camber Adjustment Plates. Ideal for All Fast Road & Track cars For all Boxster Models -
EuroCupGT-Pro Bilstein Coil-Over Spring Seat & Locking Ring 2 1/2" 63mm (1)
SKU:18940
Out of Stock2 1/2-INCH (63MM) LOWER SPRING SEAT PLATFORM or LOCKING RING. For Bilstein & EuroCupGT-Pro Coil Over Kits. Manufactured from HE30 Aluminium, for use supporting the spring coil over. These are one of the most popular parts in our suspension range, this adapter is lightweight and has been developed specially for maximum strength and control. Sold Each (1) -
EuroCupGT-Pro C Spanner for 2 1/2" 63mm for Porsche Bilstein Suspension Rings
SKU:18947
In Stock2 1/2-INCH (63MM) PRECISION C SPANNER FOR All Porsche Bilstein Koni & EuroCupGT Suspension. The Pro C spanner is for the ease of adjusting on the ride height of your Porsche without damaging the aluminium platforms and locking rings. This is a drop forged professional spanner. -
EuroCupGT-Pro C Spanner for 2 1/4" 57mm for Porsche & Bilstein Suspension Rings
SKU:18948
In Stock2 1/4-INCH (57MM) PRECISION C SPANNER FOR All Porsche Bilstein Koni & EuroCupGT Suspension. The Pro C spanner is for the ease of adjusting on the ride height of your Porsche without damaging the aluminium platforms and locking rings. This is a drop forged professional spanner. -
EuroCupGT-Pro Coil-Over Assister Spring Seat Retainer Ring 2 1/2" 63mm (1)
SKU:18943
In Stock2 1/2-INCH (63MM) HELPER SPRING PLATFORM. The 2 1/2" Double Helper Adaptor manufactured from HE30 Aluminium, for use when fitting helper spring. These are part of the EuroCupGT-Pro suspension range, but can be used on all 2 1/2" 63mm Spring Setups inc Bilstein & Koni etc. This adapter is lightweight and has been developed specially for maximum strength and control. ( Sold Each ) -
EuroCupGT-Pro Coil-Over Assister Spring Seat Retainer Ring 2 1/4" 57mm (1)
SKU:18942
In Stock2 1/4-INCH (57MM) HELPER SPRING PLATFORM. The 2 1/4" Double Helper Adaptor manufactured from HE30 Aluminium, for use when fitting helper spring. These are part of the EuroCupGT-Pro suspension range, but can be used on all 2 1/4" 57mm Spring Setups inc Bilstein & Koni etc. This adapter is lightweight and has been developed specially for maximum strength and control. ( Sold Each ) -
EuroCupGT-Pro Front Camber Plates Motorsport Monoball Top Mounts 1989-1998 (Pair
SKU:18946
In StockSimilar to the 964RS & 993RS Cup & RSR mountings, these Billet Front Top mounts are Ideal for Fast Road, Track & Race cars. Can be fitted with Standard or Coil-Over Kits for full Camber Adjustment. Note. Bilstien B9 & Other aftermarket Coil Over kits do not come with Top Mounts. ( Sold in Pairs ) -
EuroCupGT-Pro Front Coil Over Universal Conversion Kit All Models (One Axle Pair
SKU:18936
Out of StockDesigned to fit over your standard Front Damper Cases, this kit allows the use of 2 1/2" (63mm ID) Motorsport Springs. These Spring Conversion kits are ideal for Bilstein & Koni applications. Manufactured from HE30 Aluminium, this spring conversion kit gives you the option to adjust the ride height & corner Weights of your Porsche very effectively. These are lightweight and have been developed specially for maximum strength and control. Note. On most models you will need to have the Standard spring seats removed to allow for clearance over the damper tube. Can Be used on Front or Rear Applications as required. -
EuroCupGT-Pro Front GT3 Type Coil-Over Spring Top Hats 2 1/2" 63mm All Models (2
SKU:18938
In StockThese 2 1/2-INCH (63MM) Top Spring Retainers come with a a 10mm pilot hole which can be drilled if needed to 12mm or 14mm or as required. Ideal for Bilstein & Koni or GT3 applications. Manufactured from HE30 Aluminium, for use supporting spring coil-over. These are one of the popular parts in our suspension range, thes retainers are lightweight and have been developed specially for maximum strength and control. -
EuroCupGT-Pro GT3 Adjustable Front Top Mounts Porsche 996 997 Boxster & Cayman
SKU:18933
In StockEuroCupGT-Pro GT3 & GT3RS Adjustable Camber Front Top mountings, these Billet Front mounts are Ideal for Fast Road, Track Day & Race & Rally cars. Can be fitted with Standard or Coil-Over Suspension Kits. ( Sold as a Pair ) Note. Bilstien B9 & Other aftermarket Coil Over kits do not come with any Top Mounts. -
EuroCupGT-Pro Motorsoprt Adjustable Fork Arms All 996 & Boxster 986 1997-2004
SKU:18930
Out of StockRace Proven, these adjustable Fork Arms are modeled on the Porsche Motorsport RSR fitment. ( sold as a Pair ) 996 Carrera Turbo & GT3/RS Fits Front & Rear ( Requires one Pair for each Axle ) 986 Boxster Front Only -
EuroCupGT-Pro Motorsoprt Adjustable Fork Arms All 997 Rear & GT3 / RS Front
SKU:18931
Out of StockRace Proven, these adjustable Fork Arms are modeled on the Porsche Motorsport RSR fitment. ( sold as a Pair ) 997 Carrera C2S C4S GTS Turbo & GT3/RS Rear On; All 997 Models Front Only On; 997 GT2 GT3 & GT3 Cup -
EuroCupGT-Pro Rear Coil Over Universal Conversion Kit All Models (One Axle Pair)
SKU:18937
Out of StockDesigned to fit over your standard Rear Damper Cases, this kit allows the use of 2 1/4" (57mm ID) Motorsport Springs. These Spring Conversion kits are ideal for Bilstein & Koni applications. Manufactured from HE30 Aluminium, this spring conversion kit gives you the option to adjust the ride height & corner Weights of your Porsche very effectively. These are lightweight and have been developed specially for maximum strength and control. Note. On most models you will need to have the Standard spring seats removed to allow for clearance over the damper tube. Can Be used on Front or Rear Applications as required. -
EuroCupGT-Pro Rear GT3 Type Coil-Over Spring Top Hats 2 1/4" 57mm All Models (2)
SKU:18939
In StockThese 2 1/4-INCH (57MM) Top Spring Retainers come with a a 10mm pilot hole which can be drilled if needed to 12mm or 14mm or as required. Ideal for Bilstein & Koni or GT3 applications. Manufactured from HE30 Aluminium, for use supporting spring coil-over. These are one of the popular parts in our suspension range, thes retainers are lightweight and have been developed specially for maximum strength and control. -
EuroCupGT-Pro Rear Motorsport Monoball Top Mounts (Flat Type) 1989-1998 (Pair)
SKU:18945
In StockSimilar to the 964RS & 993RS Cup & RSR mountings, these Billet Rear mounts are Ideal for Fast Road, Track & Race cars. Can be fitted with Standard or Coil-Over Kits. Note. Bilstien B9 & Other aftermarket Coil Over kits do not come with Top Mounts. ( Sold in Pairs ) -
EuroCupGT-Pro Rear Motorsport Monoball Top Mounts All 996 & 997 Models 1997-2012
SKU:18944
Out of StockSimilar to the GT3 Cup & RSR Race mountings, these Billet Rear mounts are Ideal for Fast Road, Track & Race cars. Can be fitted with Standard or Coil-Over Kits. Note. Bilstien B9 & Other aftermarket Coil Over kits do not come with Top Mounts. -
EuroCupGT-Pro Rear Type Coil-Over Spring Seat & Locking Ring 2 1/4" 57mm (1)
SKU:18941
Out of Stock2 1/4-INCH (57MM) LOWER SPRING SEAT PLATFORM or LOCKING RING. For EuroCupGT-Pro Coil Over Kits. Manufactured from HE30 Aluminium, for use supporting the spring coil over. These are one of the most popular parts in our suspension range, this adapter is lightweight and has been developed specially for maximum strength and control. Sold Each (1) -
EuroCupGTBillet Front Chassis Strength Plates Porsche 996 997 Boxster & Cayman
SKU:18935
In StockThese EuroCupGT-Pro GT3 Billet Plates add Strength to the factory Wing Panel & can be used with Standard or Motorsport Top Mounts. ( Sold as a Pair ) Fits All Standard GT2 & GT3 / RS Models 1997 -2012 Also Any car using Porsche Stomski or EuroCupGT-Pro Top Mounts. -
Front Strut Brace Porsche 996 & Boxster S Carbon Fiber Fits Porsche Turbo C4S
SKU:00556
In StockThis EuroCupGT carbon fibre strut brace is more rigid & significantly lighter than the steel ones. It is fully adjustable to make fitting easy. All parts required to fit are included. The overall weight is around 900g -
Porsche 964 & 993 Carbon Fiber Strut Brace Fits Turbo S C4S RS & GT2 1989-1998
SKU:20273
In StockEuroCupGT carbon fibre strut brace is more rigid & significantly lighter than the steel ones. It is fully adjustable with anodised alloy locking rings to make fitting easy. All parts required to fit are included. The overall weight is around 900g (including mountings) -
Porsche Boxster Rear Motorsport Monoball Top Mounts (Flat Type) 1997-2012 (Pair)
SKU:18902
In StockSimilar to the GT3 Cup & RSR Race mountings, these Billet Rear mounts are Ideal for Fast Road, Track & Race cars. Can be fitted with Standard or Coil-Over Kits. Note. Bilstien B9 & Other aftermarket Coil Over kits do not come with Top Mounts. -
Rear Adjustable Toe Link Kit Porsche 996 997 & 986 987 981 Boxster & Cayman
SKU:7632
In StockEuroCupGT rear adjustable toe links arms adjusts camber & dials in the toe for the rear. These adjustable toe links are design to give you a more responsive rear end along with the ability to dial in the toe on the rear end more precisely. These do both Toe and vertical compliance for parallel arms. Fits; All 996 models inc GT3 & Turbo All 997 Models Inc GT3 & Turbo All Boxster 986 987 981 & 718 Models All Cayman 987 981 & 718 Models