You have no items in your shopping cart.
Porsche 911 Engine Components 1963 to 1989
Porsche 911 - Engine Components - 1963 to 1989
-
-
Starter Ring Gear Porsche 911 with 901 or 915 Gearbox 1969-1986
SKU:7347
Out of StockFits 911 ( 901 & 915 Box) inc Early 3.2 Carrera / 930 Turbo & 914 1969-86 -
Sump & Oil Tank Magnetic Drain Plug Porsche 911 1965-1989 Also 928 1977-1981
SKU:00098
In StockOEM Sump Plug for all 911/ SC & Carrera Oil Tanks 1965 -1989 and 911 Sump pan 1965 -1981 Only. Also Early 928 Models 1977 -1981 Only -
T Pipe Metal for later Oil Fed Tensioner 911 / 930 Turbo Left Bank 1978-1994
SKU:930.107.347.02
In StockAlso 964 Turbo -
T Pipe Metal for later Oil Fed Tensioner 911 / 930 Turbo Right Bank 1978-1994
SKU:930.107.348.14
In StockAlso 964 Turbo -
TDC Indicator & Dial Gauge 14mm Thread
SKU:SR092
Out of StockFor engines where you do not have to use a dead-stop TDC Indicator you can use our easy to read, highly accurate TDC Indicator With Travel Gauge to measure the exact position of the piston. Precisely manufactured from 6061 Aluminium and hard-coated for extra wear resistance, these indicators include ASME/ANSI certified travel gauges for proven accuracy. -
Throttle Linkage Rod Connector / damper OE Porsche 911 / 930 Turbo 1965-1989
SKU:911.423.081.02
Out of StockOEM part in tunnel -
Throttle Pedal Rubber Type All Models 1965-Onwards
SKU:11845
In StockOEM Style Rubber pedal for Classic Look ( Not Plastic ) -
Throttle Rod Linkage on Engine OE Porsche 911 2.7L 3.0L & 3.2L SC 1974-1989
SKU:925.423.026.01
Out of StockFor All None Turbo models 74 -89 -
Top Breather Hose OEM Tank to Engine Block Porsche 911 & SC Carrera 1965-1989
SKU:19384
In StockOEM Braided Top Engine Breather Pipe for All pre 1983 cars -
Turbo Charger M10 Nut 911 / 930 964 & 924 Turbo 1974-1994
SKU:900.910.099.02
In StockSold Each, 4 per flange Large Nut -
Valve Guide Inlet & Exhaust Porsche 911 930 Turbo 914 964 3.3L Turbo 1959-1994
SKU:2189
Out of StockOEM Standard Size Valve Guide for both Inlet & Exhaust Valves. Sold Each 12 per car. -
Valve Rocker Cover Late Porsche Carrera & Turbo Type (not handed) All 1965-1989
SKU:5840
In StockOriginal valve covers leak around the gasket seals. This is because the magnesium has a different coefficient of expansion to the aluminum heads. The result is a gap that develops when hot, along with a leak. Fix the problem by installing the later type aluminum Turbo valve covers. Sold Each ( 2 per car ) -
Valve Seat Exhaust All Porshe 911 / 930 Turbo 964 993 1974-1998
SKU:930.104.335.56
Out of StockOEM Valve seat for all 3.0/3.2 & 3.6 Models -
Valve Spring Height Setter Adjusting Tool All 1965-1994
SKU:5179
In StockRequired to get all the valve spring height & pre loads even -
Valve Springs Porsche 911 / 930 Turbo & 964 1965-1994 Set of 2 OE Porsche Parts
SKU:4295
In StockOEM Valve Spring set for inlet & Exhaust Valves. Sold Each 12 per car -
VALVE Tappet / back Lash ADJUSTER 911 & 964 & 993 1965-1998
SKU:SR097
In StockThe established method of setting valve lash / Tappets with a feeler gauge often provides for a "close enough" result and rarely provides for accurate, consistent, and easy to obtain precision. STOMSKI RACING's new version of an old-standby takes the "feel" out of setting valves and provides absolute precision, speed, ease of use, and consistency. By conveniently mounting a travel indicator over the adjuster of the rocker arm, STOMSKI RACING's 911 Valve Lash Adjuster allows you to quickly and accurately set and confirm the actual valve lash without settling for "close enough" or wondering whether your feel is consistent while trying to contort a feeler gauge into the far reaches of the 911 engine. The SR097 is precision machined from 6061 aluminum and anodized for years of service on all 911 engines including 964s and 993s. Also available are a range of dial indicators including metric, digital, and compact travel indicators for use in restricted areas. Note; Dial Gauge Not Included. -
Warm Up Regulator 911 2.7 3.0 SC 1974-1983 & 930 / 964 Turbo 1974-1994
SKU:2392
Out of StockOEM Bosch Reconditioned Unit. Price includes a fully refundable surcharge of £75.00 (Generic Porsche picture) -
Wiper Arm Flange Lock Nut Also for All Exhausts & 911 Engine case (Sold Each)
SKU:N.011.008.8
In StockSize M8 (13mm)