You have no items in your shopping cart.
Porsche 964 Exhausts 1989 to 1993
Porsche 964 - Exhausts - 1989 to 1993
-
930 & 964 Turbo Exhaust Manifold to Turbo Gasket 1974-1994
SKU:18165
In Stock
OEM Stainless Steel gasket between Exhaust Manifold & Turbo Charger Unit. -
930 / 964 Turbo to Rear Box Gasket and Turbo Flange 1974-1994
SKU:2959
In Stock
OEM Large Turbo Gasket. Sold Each 2 per flange -
930 Turbo Exhaust Gasket Nut & Bolt Fitting Kit All 3.0L 3.3L & 3.6L 1974-1994
SKU:19140
In Stock
930 Turbo Exhaust Gasket Nut & Bolt Fitting Kit All 3.0L 3.3L & 3.6L 1974-1994 -
964 Final Box
SKU:1664
To Order By Request (5+ days)
Mild Steel Final Silencer Box , mounts same as original -
964 Orange Rubber Heater Joiners Heat Exhaust Cross Pipe 1989-1994
SKU:964.211.339.00
To Order By Request (5+ days)
-
-
-
Copper Nuts for Exhaust Manfold Studs M8 All Models
SKU:999.084.611.02
To Order By Request (5+ days)
OEM M8 nut for All Exhaust applications. -
Cup Pipe 964
SKU:3749
In Stock
Removes rear exhaust box ( across rear of car ) . Sportier sound & saves weight. -
De-Resonated De-Cat Pipe Stainless Steel 964 Carrera RS Cup Polished 1989-1994
SKU:00298
In Stock
Frees up exhaust for better performance , All 964 C2 & C4 cars 1989 to 1994 removes catalitic converter. comes in Polished Stainless steel & Includes Heat Shield Brackets & Lambda socket. -
EuroCupGT RS Carbon Fiber Heater Duct All 964 & 993 Models 1989-1998
SKU:7283
To Order By Request (5+ days)
Replica of the RS lightweight factory heat duct in carbon fiber. The EuroCup carbon fibre heater duct replaces blower motor & ductwork. Still allows heat just like the factory part. Fits all 993's except 993 Twin Turbos. 1998 cars need duct part no 964.106.403.02. Saves 4kg in weight & tidies up the engine bay. -
Exhaust & Inlet Manifold Studs Sold Each (1) All Models 1965-Onwards
SKU:00118
In Stock
Priced each (1). For cars 4 cyl =8 / 6 cyl =12 / 8 cyl = 16 -
Exhaust Cat Pipe Tail Pipe & Rear Silencer Box Clamp & O Ring Kit All 1989-1995
SKU:1696
In Stock
OEM Stainless Steel parts in kit -
-
Exhaust Manifold to Head O Ring Gasket All 964 & 993 models 1989-1998
SKU:2274
In Stock
OEM Crush O Ring. Price each (6 per car) -
Exhaust System Manifold to Cat Nut & Bolt Kit All Models 1965-Onwards (6 sets)
SKU:4400
In Stock
For All system Joining Flanges. Includes 6x Flange Nuts & 6x Stainless Flange Bolts (6 sets in total ). Note. dose not include Head to manifold Flange Bolts (sold seperately) -
Final Rear Box Stainless Steel Polished 964
SKU:5594
To Order By Request (5+ days)
Stainless Steel Final Silencer Box , mounts same as original -
Heat Exchanger Nuts Allen Hex Head All models 1965-Onwards M8x1.25mm
SKU:2964
In Stock
6 -12 per car , Priced each (1) -
-
Heater Air Duct for Fan Housing Shroud 964 & 993 Using RS Carbon Air Pipe
SKU:7579
In Stock
Top Air duct needed when fitting RS Carbon Fibre Heater Duct to 993 Vario ram Models -
-
M10 Studs for All Turbo & Exhaust down pipe & 911 Crank Case Rear Support
SKU:900.081.052.02
In Stock
Large Stud for Turbo mounting & engine Mounting -
M8 Time Sert Thread Repair Kit. Intake & Exhaust. All models 1965 Onwards
SKU:SR066
In Stock
For exhaust & inlet port studs on all cylinder heads where the threads have been damaged, or to recover from an already improper repair, we have developed this steel Insert kit so you may use the tool to insert a Time-Sert and save an otherwise ruined head. Kit includes long & short drill, counter-bore, tap, insert tool, and 10 inserts, two drill jig bushings to guide the drill and tap. Can be used on All models 911, 924, 944, 968, 928 1965 to 1998 and on later 911 / Boxster & Cayman water cooled models to replace exhaust bolts after drilling & repairs. Kit can be used time & time again by just ordering more inserts. ( Note. Studs & locking nuts are available separately ) -
Porsche 964 De-Cat Bypass Pipe Carrera RS C2 C4 Cup Car 1989-1994 911 Racing
SKU:3747
In Stock
Frees up exhaust for better performance, comes in a painted Stainless Steel finish. All cars 1989 to 1994. comes with Lambda boss, Removes catalitic converter. -
Porsche EuroCupGT 964 Tailpipe 100mm Slash Cut (4") 911 Carrera RS C2 C4 89-94
SKU:SW0603PS06
In Stock
EuroCupGT 4" Bolt On Polished Tailpipe in Stainless Steel for a deeper sportier sound. -
Rear Silencer Box Strap All 930 Turbo & 964 Turbo models 1974-1994
SKU:4397
In Stock
OEM In 304 Stainless Steel. Sold Each. -
Side Pipe Polished Stainless For 930 Turbo & Wastegate 1974-1994
SKU:4394
To Order By Request (5+ days)
High quality 304 Stainless Steel. Can be supplied in painted finish for OEM Look. Can also be adapted for 964 Turbo 3.3 & 3.6L -
Tailpipe 964 100mm Rolled Edge (4") Stainless Steel
SKU:00251
To Order By Request (5+ days)
In Stainless Steel for a deeper sportier sound, with smooth rolled edge -
-
Turbo Charger M10 Nut 911 / 930 964 & 924 Turbo 1974-1994
SKU:900.910.099.02
In Stock
Sold Each, 4 per flange Large Nut -
-
Wiper Arm Flange Lock Nut Also for All Exhausts & 911 Engine case (Sold Each)
SKU:N.011.008.8
In Stock
Size M8 (13mm)
