Porsche 996 Engine Components 1998 to 2005

Porsche 996 - Engine Components - 1998 to 2005
Porsche 996 Engine Components 1998 to 2005
Porsche 996 - Engine Components - 1998 to 2005
Set Descending Direction
View as Grid List

Items 1-50 of 156

Page
per page
  1. 911 Head Studs Height Setting Tool 1965 to 2012
    SKU: SR099
    In Stock
    Precisely set the height of head studs on all the 911 engines using this innovative tool. The Delrin insert protects the engine case from scratches or marring, while the adjustable three-piece anodized aluminium tubular construction provides complete flexibility for all engine setups, tools, and stud combinations. For all 911, 964,993, 996 & 997 Turbo, GT2 & GT3 Engines
    US$141.68 US$118.07

    Quantity

  2. 996 & 997 Carrera 2 4 2S & C4S X51 EuroCupGT GT3 82mm Throttle body & Plenum kit
    SKU: 7425
    In Stock
    EuroCupGT Plenum & 82mm GT3RS throttle body Kit comes complete with gasket. This kit allows you to have the GT3 / X51 throttle body on your 996 & 997 Gen-1 Carrera & Carrera S / 4S. Fits all "Fly by Wire" Carrera models: 3.4, 3.6 & 3.8 years 2000 to 2009. This performance upgrade is designed to replace your standard 74mm throttle and was designed in conjunction with the EuroCupGT Carbon Y Pipe Intake kit. Will work just as well on standed Engine Maps, right through to fully developed big bore engines. Note. When using with Standard Carrera plastic air intake filter box you will need the EuroCupGT High flow Cold Air Intake pipe kit. See seperate Listing. Please call for a fitted price; 0121 585 6088
    US$674.73 US$674.73

    Quantity

  3. 996 & 997 Turbo, GT2 & GT3 Cam Sprocket Tool Also 993 Vario Ram 1996-1998
    SKU: SR9653
    In Stock
    Our version of this tool eliminates the need to buy two factory tools, this tool replaces them both. Moreover, additional refinements of this tool ensures that while torquing either the 16mm hex or the triple-box center bolts, your tool is securely supported and will not slip off. Black oxide finished hardened steel. Uses 1/2" Drive Standard Braker Bar, Extensions and/or Torque Wrench. Also Use on 991 Carrera Cup and Later 993 Vario Ram Engines after 1996.
    US$269.87 US$224.89

    Quantity

  4. 996 / 997 GT3 & Turbo Cam Shaft Timing Set Up Plates ( Pair ) 1999-Onwards
    SKU: SR127
    To Order By Request (5+ days)
    Pre sets your 4 cams ready for timing up Use our GT3 Cam Profile Plates to rough-in your GT3 cams prior to timing. CNC machined from high quality aluminium and hard-coat anodized for protection and good looks, these plates will speed up setup time and ensure your cams are properly positioned before you start timing the engine. With four cams and 24 valves to coordinate, these plates are sure to add that bit of confidence before you turn the engine over for the first time. Sold as a set of two plates. Timed to 110/110. 996 997 & 991 GT3 GT3RS GT3Cup GT3RSR. All Tuner Applications.
    US$202.40 US$168.67

    Quantity

  5. 996 / 997 GT3 Cup, RS RSR & Turbo Inlet Cam Blank Offs 1999-2012 ( Pair )
    SKU: SR030
    In Stock
    These tastefully made Billet caps are used when the GT3 & Turbo vario lift intake cams are replaced for static timing Race cams on any Mezgar Engine. A  Direct replacement for all GT3 Cup & RSR engines and ideal for all tuner applications. Sold as a Pair (2)
    US$242.88 US$202.40

    Quantity

  6. 996 Carrera 2 C4 & C4S Crank Case Oil Air Separator Breather 1998-2001
    SKU: 4073
    In Stock
    When faulty or Blocked this causes the engine to smoke due to poor oil / air circulation & crank case pressure. Can also contribute to IMS failure if not maintained or checked. We recommend replacing every 45,000 miles, or if you do not have history of it being changed. Fits all Manual & Tiptronic Carrera 2 / 4 & C4S models 1998 upto 2001 Only. ( see other listings for Later cars )
    US$134.93 US$112.44

    Quantity

  7. 996 Turbo Actuator Vacuum Valve 2000- 2004 Right Hand Unit
    SKU: 10.06.2013
    In Stock
    Oem replacement for rusty & worn unit, if your actuators don't work this will effect your boost, power & fuel economy.Note; Kinked rod type for Right hand O/S when ordering.
    US$303.64 US$253.03

    Quantity

  8. 996 Turbo Actuator Vacuum Valve 2000-2004 Left Hand Unit
    SKU: 16.05.2013
    In Stock
    Oem replacement for rusty & worn unit, if your actuators don't work this will effect your boost, power & fuel economy.Note; straight rod type for Left hand N/S when ordering.
    US$303.64 US$253.03

    Quantity

  9. 996 Turbo Actuator Vacuum Valves 2000- 2004 ( Pair )
    SKU: 16.05/10.06.2013
    In Stock
    Oem replacement for rusty & worn units, if your actuators don't work this will effect your boost, power & fuel economy.Note; This is for a pair ( 2 units )
    US$573.26 US$477.72

    Quantity

  10. Air Flow MAF Sensor 996C4 3.4L Fly by Wire 2000-2001 Only
    SKU: 00371
    In Stock
    Faulty Air mass sensors will affect performance and can cause rough idling. Replace to return you car to optimum performance. For 996 C4 3.4L models with E-Acclerator upto 2001.
    US$269.88 US$269.88

    Quantity

  11. ARP Crank Case Stud Kit 996 & 997 Turbo GT2 GT3 GT3RS & Cup 1999-Onwards
    SKU: 19127
    In Stock
    Crank Case Head Stud kit for All 996 & 997 Turbo & GT3 Models inc 991 Cup
    US$1,349.46 US$1,124.55

    Quantity

  12. ARP Engine Block to Transmission Nut & Stud Kit All 1965-Onwards
    SKU: 19123
    To Order By Request (5+ days)
    High Tensile M10 Studs inc Starter Motor mounting stud
    US$202.40 US$168.67

    Quantity

  13. ARP Head Stud Kit All M96 /M97 996 997 Carrera Boxster & Cayman models 1997-2009
    SKU: 19125
    To Order By Request (5+ days)
    Full Uprated Head Bolt Kit. Ideal for Standard & Race Engines. Note. Not for 996 & 997 Turbo or GT3 Models. See other listing
    US$1,012.09 US$843.41

    Quantity

  14. ARP Mains Bolt Kit All M96/M97 996 997 Carrera Boxster & Cayman models 1997-2009
    SKU: 19126
    In Stock
    Full Uprated Mains Bolt Kit. Ideal for Standard & Race Engines. Note. Not for 996 & 997 Turbo or GT3 Models.
    US$323.86 US$269.88

    Quantity

  15. Autoglym Engine & Machine Cleaner
    SKU: 1109
    In Stock
    A powerful, non-corrosive, multi - surface cleaner for engines, components, wheels & machinery
    US$20.23 US$16.86

    Quantity

  16. US$40.46 US$33.72

    Quantity

  17. Big End Bearing Set 996 / 997 GT3 / RS & Cup 2002-Onwards ( inc 991 Cup )
    SKU: 11944
    In Stock
    OEM Porsche Standard Big Ends ( set of 12 ). Note Not for early Mk1 GT3 1999-2001
    US$269.87 US$224.89

    Quantity

  18. Big End Bearing Set 996 997 Gen-1 / Boxster & Cayman Standard Size 1997-2009
    SKU: 4335
    In Stock
    Standard size OEM Porsche Big End Bearing set. For Oversize Please call.
    US$134.93 US$112.44

    Quantity

  19. Big End Bearing Set All 993 models & 996 / 997 Turbo & GT2 1994-2009
    SKU: 4310
    In Stock
    Standard size Bearing set of 12. For oversize 0.25mm & 0.5mm please contact us
    US$269.88 US$224.90

    Quantity

  20. Big End Con Rod Bolts 911 3.2 & 3.3 964 993 996 / 997 Turbo & GT2 1993-2012
    SKU: 996.103.176.70
    In Stock
    OEM Bolt M9 thread for later 911 3.2 Carrera 930 Turbo 964, 993 & 996 / 997 Turbo models
    US$16.18 US$13.48

    Quantity

  21. Big End Con Rod bolts each 996 997 986 987 Boxster & Cayman Gen-1 ( 12 per car )
    SKU: 997.103.115.01
    In Stock
    OEM Stretch bolt. Change when rebuilding engine.
    US$6.46 US$5.38

    Quantity

  22. Big End Con Rod Nut 911 3.2L Carrera 964 993 & 930 996 / 997 Turbo 1978-2012
    SKU: 00144
    In Stock
    OEM Porsche Con Rod Nut for all late 911's 964, 993 & 930 996 / 997 Turbo Models. Sold Each. 12 per car. Note Please quote model & year when ordering
    US$4.02 US$3.35

    Quantity

  23. US$40.46 US$33.72

    Quantity

  24. Breather Tube Oil Air Separator All 996 Carrera & Boxster 1997-2001
    SKU: 996.107.175.50
    In Stock
    can split or collapse causing poor running. For Models upto 2001
    US$20.23 US$16.86

    Quantity

  25. US$16.18 US$13.48

    Quantity

  26. US$26.98 US$22.48

    Quantity

  27. Cam Chain 996 Carrera 3.4L 986 Boxster 2.5L 1997-2001 M96.01/02 Engine Only
    SKU: 996.105.177.52
    In Stock
    OEM Main Duplex Cam Chain from Crank Shaft to Inlet Cam. Sold Each. 2 per car. For all 3.4L 996 and 2.5L Boxster models 1997 -2001
    US$80.95 US$67.46

    Quantity

  28. CAM CHAIN TENSIONER SETUP ADJUSTERS 964 993 996 997 GT3 & Turbo ( Pair )
    SKU: SR9401
    To Order By Request (5+ days)
    STOMSKI RACING compact versions of the Factory Timing tool allows for easier installation and removal, included thumbscrews can be used to attach these tensioners. Precise springs and tolerances provide for proper tension of the chain. Stainless steel and anodized aluminum insure this tool will provide years of service. Comes in a set of two (2), so engines can be turned over wile checking. 964 993 996 & 997 GT2 GT3 RS Cup RSR & Turbo ( Includs 991 Cup )
    US$323.86 US$269.88

    Quantity

  29. Cam Follower 996 / 997 / Boxster / Cayman / Cayenne / GT3 / Turbo 1998-2012
    SKU: 3587
    In Stock
    OEM Cam Follower Tappet. Inlet & Exhaust (24) on All 986 Boxster & 996 Carrera / GT3 & Cayenne. Exhaust only (12) on; 996 Turbo, 987 Boxster & Cayman. Also 996 GT3 Cup ( Pn.996.105.041.72 )
    US$24.28 US$20.23

    Quantity

  30. Cam Position Hall Sensor 996 997 Carrera Turbo & GT3 Boxster & Cayman 2003-2012
    SKU: 996.606.106.03
    In Stock
    OEM Cam Box Magnetic Hall Timing sensor. All Cars 2003-Onwards
    US$80.95 US$67.46

    Quantity

  31. Cam Timing Chain 996 & 997 Turbo / GT3 / GT2 & 991 Cup 1999-2016
    SKU: 11940
    In Stock
    OEM Cam Drive Chain. Sold Each ( 2 per Car ) All GT3 & Turbo models inc 991 Cup Sold Each (2 per car)
    US$161.92 US$134.93

    Quantity

  32. Cam Timing Chain 996 997 Carrera 3.6L 3.8L / Boxster & Cayman 2000-2009
    SKU: 996.105.152.01
    In Stock
    OEM Main Cam Timing Chain 996 / 997 Carrera 2/4 C2S & C4S 3.6L 3.8L Carrera. 986 / 987 Boxster & Cayman Sold Each (2 per Car)
    US$121.44 US$101.20

    Quantity

  33. Cam to Cam Chain 996 Carrera 3.4L & 986 Boxster 2.5L 1997-2001 Only. M96.01/02
    SKU: 996.105.170.53
    In Stock
    OEM Simplex Cam Link up Chain between the Inlet Cam & Exhaust Cam in Head. Sold Each 2 per car.
    US$32.38 US$26.98

    Quantity

  34. Cam Valve Timing Solenoid Bank 1-3 996 3.4L & 986 Boxster 2.5L 1997-2001
    SKU: 4342
    In Stock
    Actuator solenoid for cam shaft. Located under cam cover so sealant required to reseal cam cover. 1997 -2001
    US$566.77 US$472.31

    Quantity

  35. Cam Valve Timing Solenoid Bank 4-6 996 3.4L & 986 Boxster 2.5L 1997-2001
    SKU: 4356
    In Stock
    Actuator solenoid for cam shaft. Located under cam cover so sealant required to reseal cam cover. 1997 -2001
    US$566.77 US$472.31

    Quantity

  36. Centre Radiator kit for 996 Carrera 2 / C4 S & Boxster 1997-2005 OEM GT3 part
    SKU: CENTERRAD996
    In Stock
    Porsche Genuine Oem Center Radiator kit for 996 Carrera 2 & C4 and All Boxster 986 models 1997-2005 Comes with pipes & frame work and Duct ( As fitted as standard to the 996 GT3 ). NOTE. On Some Porsche models, some modifications may be needed to the central bumper PU Grill area. This will be your own responsibility to investigate prior to purchasing. Note2. The Picture may NOT represent the exact fittings included.
    US$809.68 US$674.73

    Quantity

  37. Coolant Expansion Header Tank All 996 & 997 Carrera Turbo GTS & GT3 1998-2012
    SKU: 5067
    In Stock
    Coolant header tank in engine compartment for All 996 & 997 Models from 2000 -Onwards inc Turbo & GT3. Original Large tank ( also fits pre 2000 Cars )
    US$182.16 US$151.80

    Quantity

  38. Crank Case Head Bolt O Ring Installer All Models 1965-Onwards
    SKU: SR024
    In Stock
    Based on the factory P9511 tool, STOMSKI RACING's version of this tool incorporates a brass cap and a double-ended stainless steel sleeve to install the O-rings on the crankcase through-bolts. By using it, the brass cap to protects the delicate O-ring from getting cut on the threads of the bolt, you can then use the "thin" end of the sleeve to slide the O-ring over the brass cap onto the shank of the through-bolt. Once the o-ring is clear of the threads, remove the SR024 brass cap and flip the SR024 stainless steel sleeve over and use the blunt end to securely and gently seat the O-ring in the recess on the crank case.
    US$67.46 US$56.22

    Quantity

  39. Crank Case Head Stud Driver All 911 964 993 996 / 997 GT3 & Turbo Models 1965-On
    SKU: SR099D
    In Stock
    Simple Allen Key Lock Single Action. Double-nutting a head stud to install it into the engine case not only takes time, but can be stressful for the threads, and can lead to variations in stud depth . Protect your hardware investment and speed installation by using the Head Stud Driver. Made from black oxide finished hardened steel, this uniquely designed tool threads onto the head stud but will not clamp on to the threads, making installation faster, gentler, and more accurate.
    US$64.76 US$53.97

    Quantity

  40. Crank Case Sealant 911 964 993 996 / 997 Turbo & GT3 Cayenne OEM
    SKU: 000.043.204.58
    In Stock
    OEM Porsche Approved Case Sealant for Main Join. Can also be used on Earlier 911's
    US$48.56 US$40.47

    Quantity

  41. Crank Case Through Bolt "NUT" 964 993 / 996 & 997 Turbo & GT3 +991 Cup 1989-2012
    SKU: 959.101.172.00
    In Stock
    Through Bolt Nut for all Crank cases 1989-Onwards Inc GT3Cup ( 12 per car )
    US$4.84 US$4.03

    Quantity

  42. Crank Case Through Bolt Washer 964 993 997 / 997 Turbo & GT3 ( 24 ) Sold Each
    SKU: 964.101.313.71
    In Stock
    OEM Porsche Crank Case Steel Sealing Washer. All Models Inc 991 Cup
    US$6.73 US$5.61

    Quantity

  43. Crank Shaft GT3 / GT3RS & GT3Cup 3.6L & 3.8L 2003-2012
    SKU: 996.102.021.93
    To Order By Request (5+ days)
    OEM Porsche GT3 Crank shaft for all 3.6 & 3.8 applications 996 997 & 991 Cup. Can also be used in 996 / 997 Turbo with our Pauter Con Rod Kit. Also 964 & 993 with modifications.
    US$2,816.30 US$2,346.92

    Quantity

  44. US$4.84 US$4.03

    Quantity

  45. Deep Sump Oil Pan Kit 996 997 Carrera 986 & 987 Boxster & Cayman 1997-2009
    SKU: 5114
    To Order By Request (5+ days)
    Scavenging & aeration in the oil pan are a problem in 996/997 / 986 / 987 Boxster & Cayman models .This oil pan spacer provides a simple solution. Increases sump capacity by half a quart, providing more reserve to ward off starvation. The kit clears all factory options including the rear skid plate. Added oil capacities as well as increased oil pan surface area increase oil cooling and engine performance. Note. Not Turbo or GT3 Models.
    US$404.83 US$337.36

    Quantity

  46. Deep Sump Pan Oil Baffle Kit 996 / 997 Carrera / Boxster & Cayman 1997-2009 X51
    SKU: 18501
    In Stock
    OEM Porsche X51 Kit. Extra capacity of 0.5L & Anti Surg. Ideal for All Motorsport & Fast Road Applications or Engine Rebuilds. Note. Not for Generation 2 Models made after 2009
    US$404.83 US$337.36

    Quantity

  47. Duel Mass Flywheel 996 & 997 carrera 3.4 & 3.6L 1998-2009 ( not 3.8 Carrera S or Turbo )
    SKU: 5236
    To Order By Request (5+ days)
    OEM Duel Mass for all 3.4 & 3.6 Models 1998 -2009
    US$792.17 US$660.14

    Quantity

  48. Electronic Throttle Body 68mm All Boxster Models 1999-2006 & 996 Turbo / GT2
    SKU: 18635
    In Stock
    OEM German Throttle body to replace faulty or worn unit. Fits all Standard Boxster / S & 996 Turbo factory models 2000 -2006
    US$485.80 US$404.83

    Quantity

  49. US$16.18 US$13.48

    Quantity

Loading ...
Load More ...
Set Descending Direction
View as Grid List

Items 1-50 of 156

Page
per page