Porsche 997 Gen 1 Exhausts 2004 to 2009

EuroCupGT Porsche 911 Carrera, S, S4, & GTS ( 3.4, 3.6, 3.8L ) A2 grade Stainless Exhaust Nuts, Bolts & Gaskets. Also includes cat pipe sleeves & Stainless Tail pipe Clamps, ideal when replacing or repairing your old System. Fits all cars 1998 to 2009

EuroCupGT Porsche 911 Carrera 2/4 2S, 4s & GTS ( 3.4, 3.6, 3.8L ) A2 grade Stainless Exhaust Nut, Bolt & Gasket, kit, ideal when replacing or repairing your old System. Fits all cars 1998 to 2009

911 GT3 Exhaust Gasket set, ideal when replacing your System or replacing the Cats. Fits all cars 1999 to 2012

EuroCupGT / Porsche 911 GT3 ( 3.6, 3.8L ) A2 grade Stainless Exhaust Nuts, Bolts & Gaskets. Also includes cat pipe sleeves & Stainless Tail pipe Clamps, ideal when replacing or repairing your old System. Fits most cars 1999 to 2012

EuroCupGT 911 Full A2 grade Stainless Exhaust Nut & Bolt kit, includes 12x Manifold to Head Shoulder bolts, 6x Manifold to at / Turbo bolts & 8x shoulder nuts. ideal when replacing your System or repairing the Turbo's

Light weight 1kg Ideal for Track days by reducing rear end weight. can also be used on GT3 Body Kit conversions

OEM Stainless Steel Gasket

High Flow Matched 304 Stainless Steel Manifolds for increased power & Sound ( Not Turbo or GT3 )

Made from high grade 304 stainless steel. Price is per pair. Will Fit with Standard Cats & Tailpipes. ( Please Note No Tailpipes, these are extra )

Perfect sounding exhaust system that helps gain power. Turbocharged cars do not need any backpressure & ideally perform best with no restriction, developed to give the Porsche 996 Turbo owners a race tone exhaust without drone in the 2200-2800 rpm range.Features high flow 200 cell catalytic converters. Works with the factory O2 primary and secondary sensors so not to throw a check engine light. Works with the factory tips or all aftermarket Cuts the weight by 50%. Because of the reduced restriction in the high flow 200 cell cats compared to the stock 400 cell, the turbos are able to relieve exhaust gas much quicker. Tested on AWD Dyno, the exhaust gains of 20 whp and 30 ft/lbs of torque.

Set of 3 Stainless Manilfold to Cat Bolts. There are three per side and Six in total

For All Gen-1 997 Models upto 2009 , except 997 Turbo & 997 GT3. Original Porsche. Sold Each

OEM M8 nut for All Exhaust applications.

EuroCupGT Carrera 3.4, 3.6 & 3.8 1998-2009 Gen-1 Only The EuroCupGT De-cat pipe system utilises the latest gas-flow technology to convert the traditional 2x3 cylinder system into a true 6 cylinder system. It is little known that All exhaust systems extract gasses via a vacuum suction action once the engine is running, therefore with the Cross Over design the gasses are extracted via the shortest route, thus allowing the engine to rev freely, improving gas flow & ultimately Horse Power!! Fits All Standard Factory & EuroCupGT Manifolds & Rear Silencers

EuroCupGT high flow 200 Cell Cats are made from high grade 304 stainless steel. Price is per pair. 996 /997 Gen-1 Carrera 3.4L, 3.6L & 3.8L Upto-2009

Cup Style 304 Polished Stainless Steel. Fits Directly onto Cat Pipes or De-cat pipes and Delets the heavy Rear Silencer Boxes and reduces about 20Kg of weight from the rear of the car

EuroCupGT Large Stainless Steel Polished tailpipes will fit all models with standard exhaust system both Carrera 2/4 & Carrera 2S & 4S models. Note; Not for cars with OE sports switchable system. Also Ideal for standard Carrera cars with the EuroCupGT sports rear boxes (also listed in this section).

EuroCupGT Stainless Steel Centre Outlet Exhaust pipe & tail pipe kit for All Carrera Models. This kit allows you to use the GT3 type centre outlet rear bumper & comes with hard wear and a polished bolt on Stainless tail pipe. Note. For clearance purposes it is recommended that this kit is used in conjunction with either EuroCupGT cats or de-cat pipes.

304 Stainless Steel Matched High Flow Manifolds. These are a direct replacement and fit directly onto the OEM Silencer System. Complete with O2 sensor holes. All GT3; 3.6L / 3.8L & 4.0L & GT3 Cup. (Also fits 991 GT3 Cup cars)

997 GT3 / GT3RS Rear Exhaust Silencer Bypass / Delete. Direct bolt on replacement for OEM silencer. 304 Stainless For 3.6L 3.8L & 4.0L & GT3 Cup cars 2005 to 2012

EuroCupGT Twin Turbo Shot Gun twin round tailpipes. Will fit all 997 Turbo models.

Pair of EuroCup 996 C2 / C4 decat pipes in stainless steel. Not suitable for Mot. Good performance improvement & sound. Can be replaced quickly for MOT testing.

EuroCupGT Polished Sports Silencers in 304 Stainless Steel. Direct replacement, No drone and not to loud, also ideal for Rusty & MOT failure cars. Great on Road & Track. 89Db depending on your Cats. Desgned to pass UK track Day limits. Fits All 997 Gen-1 997 Carrera models C2/C4 & C2S/C4S. Note Included Tail Pipes.

EuroCupGT high flow manifolds are made from high grade 304 stainless steel. Price is per pair. Fits All Standard Carrera systems inc C4S

304 Stainless Steel High Flow Rear Silencers. Direct replacement. Not Loud at. 87db

EuroCupGT 997 Carrera Gen-1 high flow exhaust system made from 304 Grade Stainless Steel. Includes: manifolds, high flow cats, high flow rear boxes & Tail Pipes & gaskets & Clamp Kit. Power gain +20-30bhp subject to engine size, Map & Fuel. Click here for a video of this product in action

EuroCupGT 200-cell Cats. Real power gains, this system makes nearly 30hp & 30ft-lbs gain. The exhaust system is polished 304 stainless . Will fit with standard tailpipes or EuroCupGT tailpipes.

EuroCupGT 997 Gen-1 Full high flow exhaust system made from 304 grade Polished stainless steel. Includes: manifolds, high flow cats, high flow rear boxes. Power gain +20-30bhp depending on Engine Size, Fuel & Map. All Carrera Models 2005-2009. Includes Gaskets & Clamps. Note. Dose Not include tail Pipes. Re use your own Tail Pipes or choose from Options listed.

EuroCupGT stainless steel tailpipe for original exhaust. Twin outlet , simple bolt on. Will fit all GT3 & GT3RS 3.6L 3.8L & 4.0L

EuroCupGT black stainless steel 997 Turbo Only.

EuroCupGT sports tailpipes for All Carrera 2/4 & Carrera S / 4S models, turbo style black stainless steel finish.

EuroCupGT stainless steel polished silver finish twin tailpipes. Turbo Only

These studs are shouldered & are designed to replace your existing corroded cylinder head to exhaust manifold bolts. Sold in packs of 12 ( one car set ) Fits all models 1997 to 2011

Sports tailpipes for All Carrera 3.6L & Carrera S 3.8L models giving a unique Turbo styling to your rear bumper. 304 stainless steel in Polished silver finish. 2005-2012. Note. Not for cars fitted with the factory Switchable System.

EuroCupGT Titanium twin tailpipe for all 997 GT3 & GT3RS exhausts. Feather weight twin outlet aprox 650g in weight Simple bolt-on bolt-off option which saves 1.25Kg from the rear of the car. Will fit all GT3 & GT3RS models 2005 to 2012

EuroCupGT high flow manifolds for improved gas flow & better response & performance. Ideal with uprated & GT2 Turbo's. Includes All Stainless Gaskets, Nuts & Bolts.

When removing Exhaust Manifold Headers most cars these days end up with snapped & rusted exhaust manifold bolts. Rarely can an accurate removal of the broken bolt be performed with the engine in situe, and even after removal the task is time consuming. This Kit allows you to drill out the broken bolts accurately saving time and headaches. A CNC billet plate indexes precisely off the broken bolt holes & uses a uniquely designed thumb screw locator allowing the plate to be locked in place. Kit included pilot drills and drill guides and allows for a perfectly perpendicular and centered hole that can then be chased with the M8 tap. The kit comes in a sturdy storage case and includes the billet Indexing plate, 2x drill bits, M8 tap, M8 tap extension, drill jig guides, thumb screws, and all hardware.

Manifold to Cat / Rear silencer Pipe. Sold Each. 2 per car

OEM Porsche Stainless Steel Left Side. Note. Please use Year & Model in checkout.

OEM Porsche Right Hand Stainless Steel Note. Please use Year & Model in checkout.

OE Stainless Steel Exhaust to head Manifold Gasket. Two Per car, sold Each (1 unit ) All 996 & 997 Carrera Gen-1, Boxster & Cayman, 1998 -2009

Original Porsche Exhaust to Head Manifold Gasket. Two per car ( Sold Each 1 ) Stainless Steel Fits 996 Turbo, 996 GT2, 996 GT3, 997 Turbo Gen-1 1999 to 2009 & 997 GT2, GT3, GT3RS & GT3 Cup 1999 to 2013. Note. Not for Porsche Boxster, Cayman or 911 Carrera models, (please see other gaskets listed.)

Sleeve Clamps for replacing Rear silencer boxes or cats. Sold per pair Fits All 996 & 997 Carrera models 3.4, 3.6, & 3.8 1998 to 2009 including 996 GT3 & 996GT3RS Note; Not for 997 GT3 or Turbo Models.

Contains; 12x Stainless Steel Manifld to Head Flange bolts and 6x sets of Manifold to Cat Pipe nuts & Bolts ( Generic picture )

Switchabe sports exhaust, from standard during normal road driving to a more aggressive tone during performance use. Selected using button on centre console. On vehicles with the optional Sport Chrono Package Plus, the sport exhaust mode is enabled when the Sport Chrono Sport mode is selected. The package also includes stainless steel tailpipes with hard chrome-plated finish. For Models upto 2009. Includes dashboard switch panel

For All system Joining Flanges. Includes 6x Flange Nuts & 6x Stainless Flange Bolts (6 sets in total ). Note. dose not include Head to manifold Flange Bolts (sold seperately)

EuroCupGT 911 GT3 A2 grade Stainless Exhaust Nut, Bolt & Gasket, kit, ideal when replacing or repairing your old System. Fits all cars 1999 to 2012

OEM Alloy Spark Plug Heat Shield ( rots out )

Fits between the manifold and cat. on all Gen.1 models from 2005-06.

For exhaust & inlet port studs on all cylinder heads where the threads have been damaged, or to recover from an already improper repair, we have developed this steel Insert kit so you may use the tool to insert a Time-Sert and save an otherwise ruined head. Kit includes long & short drill, counter-bore, tap, insert tool, and 10 inserts, two drill jig bushings to guide the drill and tap. Can be used on All models 911, 924, 944, 968, 928 1965 to 1998 and on later 911 / Boxster & Cayman water cooled models to replace exhaust bolts after drilling & repairs. Kit can be used time & time again by just ordering more inserts. ( Note. Studs & locking nuts are available separately )

OEM Stainless Steel Gasket

OEM Tail Pipe For Gen-2 997 Turbo Models, 2010 onwards. Can be adapted to fitted to Gen-1 when updating bumper to Gen-2

OEM Tail Pipe For Gen-2 997 Turbo Models, 2010 onwards. Can be adapted to fitted to Gen-1 when updating bumper to Gen-2

Turbo Look Large Oval OEM set. Hard Chrome finish, easy to maintain. All Carrera 3.6L Models. Original Porsche Tequipment Sold as a Pair (2)

911 Turbo Full Exhaust Gasket set, ideal when replacing your System or repairing the Turbo's Fits all cars 2000 to 2012

Rear Exhaust Muffler Nut & Bolt kit Fits; 996 & 997 Carrera models 1997 to 2009 This kit replaces worn & rusty nuts & bolts, ideal for when changing your rear silencers, kit is complete for both sides.

OEM Porsche Stainless Steel Left Silencer Support. All 996 & 997 Carrera C2 C4 C2S C4S 1998 -2009 & 996 GT3 / RS 1999 -2004

OEM Porsche Stainless Steel Right Silencer Support. All 996 & 997 Carrera C2 C4 C2S C4S 1998 -2009 & 996 GT3 / RS 1999 -2004

Fits all Turbo & GT3 models 2005 -Onwards inc 991 Carrera Cup

Clamping sleeve for Rear Silencer Box

Avoid the headache of trying to drill out broken exhaust bolts on the Turbo, GT2 & GT3 engines. A CNC milled plate indexes precisely off of the broken bolts and/or bolt holes. Using our uniquely designed Thumb Screws, the SR068 plate is locked in place (by threading a Thumb Screw over a broken bolt or by using a supplied bolt threaded through the SR068 Thumb Screw). With the included pilot drills and drill guides, the faulty bolt can be drilled out, producing a perfectly perpendicular and centered hole that if necessary can be chased with the supplied M8x1.25 tap. Kit includes aluminum fixture, drill bits, tap with extension, drill jigs/guides, Thumb Screws, and hardware in a sturdy storage case.

OEM Porsche. Hard Chrome coated replacement set (2) for all Carrera 2/4 & Carrera 2S/4S Models with Original Porsche Switchable X51 Rear Silencers ( 2 in/2 out )