You have no items in your shopping cart.
Porsche 997 Gen 2 Exhausts 2010 to 2012
Porsche 997 Gen 2 - Exhausts - 2010 to 2012
-
996 & 997 GT3 & GT3RS Exhaust Gasket set 1999-2012
SKU:ECGT-6664
In Stock911 GT3 Exhaust Gasket set, ideal when replacing your System or replacing the Cats. Fits all cars 1999 to 2012 -
996 & 997 GT3 / GT3RS Full Exhaust fitting Kit ( Inc Clamps ) 1999-2012
SKU:ECGT-6668
In StockEuroCupGT / Porsche 911 GT3 ( 3.6, 3.8L ) A2 grade Stainless Exhaust Nuts, Bolts & Gaskets. Also includes cat pipe sleeves & Stainless Tail pipe Clamps, ideal when replacing or repairing your old System. Fits most cars 1999 to 2012 -
996 & 997 Turbo & 911 GT2 Exhaust Gasket Set 1999-2012
SKU:ECGT-6663
In Stock911 Turbo Full Exhaust Gasket set, ideal when replacing your System or repairing the Turbo's Fits all cars 2000 to 2012 -
996 & 997 Turbo / GT2 & GT3 / RS stainless Steel Exhaust fitting Kit 1999-2012
SKU:ECGT-6661
In StockEuroCupGT 911 Full A2 grade Stainless Exhaust Nut & Bolt kit, includes 12x Manifold to Head Shoulder bolts, 6x Manifold to at / Turbo bolts & 8x shoulder nuts. ideal when replacing your System or repairing the Turbo's -
997 Turbo Flange to Cat Pipe / Rear Silencer Gasket Large square 2005-2012
SKU:997.111.217.70
In StockOEM Stainless Steel Gasket -
Agency Power High Flow Cat-Back Exhaust System All 997 Carrera Gen-2 2009-2012
SKU:AP9972170
Out of StockAgency Powers exhaust system for All 997 Carrera Gen-2 Models features high quality and tuned rear boxes in addition to the high flow cross pipe in the kit. The exhaust has been tuned to produce an incredible race tone without a lot of drone found in similar designs. The exhaust fits with the Agency Power dual exhaust tips or stock tips as pictured. Since the car retains the primary catalytic converters, there are no check engine light or emissions issues. Nice Crisp Sound The entire exhaust is 304 stainless steel and polished to a show finish. It uses the OEM mounting points and hardware. -
Bolt Catalytic Converter to Manifold ( set of 3 )
SKU:900.074.287.02
In StockSet of 3 Stainless Manilfold to Cat Bolts. There are three per side and Six in total -
Carrera 997 Gen-2 Exhaust silencer Sleeve Clamps x2 set 2009-2012
SKU:00962
In StockRear Silencer Sleeve Clamp Set for All 997 Gen 2 Carrera models. Pair (2) -
Copper Nuts for Exhaust Manfold Studs M8 All Models
SKU:999.084.611.02
In StockOEM M8 nut for All Exhaust applications. -
EuroCupGT 997 Carrera 2/4 & 2S/4S Large Stainless Tailpipes 2005-2012
SKU:7282
In StockEuroCupGT Large Stainless Steel Polished tailpipes will fit all models with standard exhaust system both Carrera 2/4 & Carrera 2S & 4S models. Note; Not for cars with OE sports switchable system. Also Ideal for standard Carrera cars with the EuroCupGT sports rear boxes (also listed in this section). -
EuroCupGT 997 Turbo GT2 Look Twin Round Tailpipes 2005-2012
SKU:7480
In StockEuroCupGT Twin Turbo Shot Gun twin round tailpipes. Will fit all 997 Turbo models. -
EuroCupGT Large Stainless Steel GT3 / GT3RS Tailpipe Bolt On 2005-2012
SKU:8139
In StockEuroCupGT stainless steel tailpipe for original exhaust. Twin outlet , simple bolt on. Will fit all GT3 & GT3RS 3.6L 3.8L & 4.0L -
EuroCupGT Sports Tailpipes Black Finish for All 997 Carrera 2/4 & 2S/4S 2005-On
SKU:8042
In StockEuroCupGT sports tailpipes for All Carrera 2/4 & Carrera S / 4S models, turbo style black stainless steel finish. -
EuroCupGt Stainless Manifold to Head Bolt Set Porsche Carrera Boxster Cayman x12
SKU:ECGT118
In StockThese studs are shouldered & are designed to replace your existing corroded cylinder head to exhaust manifold bolts. Sold in packs of 12 ( one car set ) Fits all models 1997 to 2011 -
EuroCupGT Stainless Steel Twin Tailpipes Porsche 997 Carrera 2/4 & 2S/4S
SKU:8041
In StockSports tailpipes for All Carrera 3.6L & Carrera S 3.8L models giving a unique Turbo styling to your rear bumper. 304 stainless steel in Polished silver finish. 2005-2012. Note. Not for cars fitted with the factory Switchable System. -
EuroCupGT Titanium Tailpipe for Porsche 997 GT3 & RS aprox 650g 911 2005-2013
SKU:8140
In StockEuroCupGT Titanium twin tailpipe for all 997 GT3 & GT3RS exhausts. Feather weight twin outlet aprox 650g in weight Simple bolt-on bolt-off option which saves 1.25Kg from the rear of the car. Will fit all GT3 & GT3RS models 2005 to 2012 -
Exhaust Manifold Gasket All models 2009-Onwards ( Not Handed )
SKU:8078
In StockFor All Models 2009 onwards, except GT2 & GT3 -
Exhaust Manifold Gasket OE for All 996 & 997 Turbo GT2 GT3 RS Cup & RSR (Each)
SKU:996.111.107.71
In StockOriginal Porsche Exhaust to Head Manifold Gasket. Two per car ( Sold Each 1 ) Stainless Steel Fits 996 Turbo, 996 GT2, 996 GT3, 997 Turbo Gen-1 1999 to 2009 & 997 GT2, GT3, GT3RS & GT3 Cup 1999 to 2013. Note. Not for Porsche Boxster, Cayman or 911 Carrera models, (please see other gaskets listed.) -
Exhaust Manifold Torque Screw OE Porsche All models 2009-2016
SKU:999.073.535.02
Out of StockOE Porsche Screw. Sold Each (1) 18 per car -
Exhaust Rear Silencer & Center Box Clamp 65mm All Models 2010-Onwards
SKU:958.111.220.10
In StockSold Each (1) For; Cayenne Centre & Rear Silencers (4) Macan Cat Down Pipe (1/2) Panamera Cat Down Pipe (1/2) 997 & 991 Rear Silencers (1/2) -
Exhaust Silencer clamp sleeves (Pair) Cayenne Panamera Macan 911 997 991 Carrera
SKU:955.111.220
In StockSold per pair (2) these 65mm clamps fit at each end of the center exhaust pipe to connect the cat pipes and rear silencer boxes. -
Exhaust Stainless Nut & Bolt Set 996 & 997 & 991 Carrera Boxster & Cayman 1997-O
SKU:4436
In StockContains; 12x Stainless Steel Manifld to Head Flange bolts and 6x sets of Manifold to Cat Pipe nuts & Bolts ( Generic picture ) -
Exhaust System Manifold to Cat Nut & Bolt Kit All Models 1965-Onwards (6 sets)
SKU:4400
In StockFor All system Joining Flanges. Includes 6x Flange Nuts & 6x Stainless Flange Bolts (6 sets in total ). Note. dose not include Head to manifold Flange Bolts (sold seperately) -
GT3 & GT3 RS / GT3 Cup Stainless Steel Bolts & Gaskets Exhaust fitting Kit
SKU:ECGT-6662
In StockEuroCupGT 911 GT3 A2 grade Stainless Exhaust Nut, Bolt & Gasket, kit, ideal when replacing or repairing your old System. Fits all cars 1999 to 2012 -
M10 Flang Nut For Suspension All Models 1965-Onwards
SKU:999.076.053.01
In StockOEM Porsche Flange Nut For All Suspension, Engine, Chassis & Gearbox applications -
M8 Time Sert Thread Repair Kit. Intake & Exhaust. All models 1965 Onwards
SKU:SR066
Out of StockFor exhaust & inlet port studs on all cylinder heads where the threads have been damaged, or to recover from an already improper repair, we have developed this steel Insert kit so you may use the tool to insert a Time-Sert and save an otherwise ruined head. Kit includes long & short drill, counter-bore, tap, insert tool, and 10 inserts, two drill jig bushings to guide the drill and tap. Can be used on All models 911, 924, 944, 968, 928 1965 to 1998 and on later 911 / Boxster & Cayman water cooled models to replace exhaust bolts after drilling & repairs. Kit can be used time & time again by just ordering more inserts. ( Note. Studs & locking nuts are available separately ) -
Manifold / Cat to Centre Box Gasket All Carrera models 2009-Onwards
SKU:8080
In StockFor All Gen2 997 Models 2009 onwards, except 997 Turbo & 997 GT3 -
Manifold to Turbo Gasket Triangle 996 & 997 Turbo / GT2 2005-2012
SKU:997.111.215.70
In StockOEM Stainless Steel Gasket -
OEM Tailpipe 997 Turbo Gen-2 Left side 2010-2012
SKU:997.111.251.32
In StockOEM Tail Pipe For Gen-2 997 Turbo Models, 2010 onwards. Can be adapted to fitted to Gen-1 when updating bumper to Gen-2 -
OEM Tailpipe 997 Turbo Gen-2 Right side 2010-2012
SKU:997.111.252.32
In StockOEM Tail Pipe For Gen-2 997 Turbo Models, 2010 onwards. Can be adapted to fitted to Gen-1 when updating bumper to Gen-2 -
Porsche 997 Carrera 2/4 2S/4S Clamping Sleeve Side to Rear Box OE Porsche
SKU:8077
In StockOEM Porsche Clamp For All Gen2 Carrera 997 Models 2009 onwards, except 997 Turbo & 997 GT3. Original Porsche. -
Porsche 997 GT3 & GT3 RS Stainless Exhaust Manifolds (Without Cats) 2005-2012
SKU:146345
In Stock304 Stainless Steel Matched High Flow Manifolds. These are a direct replacement and fit directly onto the OEM Silencer System. Complete with O2 sensor holes. All GT3; 3.6L / 3.8L & 4.0L & GT3 Cup. (Also fits 991 GT3 Cup cars) -
Porsche 997 GT3 / GT3RS Rear Exhaust Silencer Bypass / Delete 2005-2012
SKU:126255
In Stock997 GT3 / GT3RS Rear Exhaust Silencer Bypass / Delete. Direct bolt on replacement for OEM silencer. 304 Stainless For 3.6L 3.8L & 4.0L & GT3 Cup cars 2005 to 2012 -
Porsche 997 GT3 / RS Light Weight Carbon Fibre Tailpipe (Bolt On) 2005-2012
SKU:06-8611
In StockLight weight 1kg Ideal for Track days by reducing rear end weight. can also be used on GT3 Body Kit conversions -
Rear Silencer Box Strap 997 All 997 Carrera Gen-2 2010-2012
SKU:8082
In StockRear box strap for all 997 Gen-2 Carrera models. -
-
Stomski Racing Exhaust Manifold Stud Repair Kit All models 2009-Onwards
SKU:SR069
Out of StockFor the current generation of Porsche DFI Engines on 911/997/991/ Boxster & Cayman. (9A1) heads on the water-cooled engines are reporting broken exhaust bolts. Tasks ranging from a simple exhaust system update through an engine removal, are consistently plagued by snapped, rusted, and broken exhaust manifold bolts. Rarely can an accurate removal of the broken bolt be performed with the engine in the car, and even after removal, the task is time consuming and if not done carefully can lead to a damaged head or faulty repair. STOMSKI RACING's answer to these problems is the SR069, a kit that easily, accurately, and flexibly allows you to drill out the broken bolts - with the engine still in the car- saving time and headaches. A CNC milled plate indexes precisely off the broken bolts and/or bolt holes. Using our uniquely designed Thumb Screws, the SR069 plate is locked in place (by threading a Thumb Screw over a broken bolt or by using a supplied bolt threaded through the SR069 Thumb Screw). With the included pilot drills and drill guides, the faulty bolt can be drilled out, producing a perfectly perpendicular and centered hole that if necessary can be chased with an included M8x1.25 tap. Kit includes anodized aluminum fixture, drill bits, tap with extension, drill jigs/guides, Thumb Screws, and hardware in a sturdy storage case. Also includes our SR065D drill guide. -
Tail Pipe Clamp All Models 2010-Onwards Sold Each ( 2 per Car)
SKU:8081
In StockFor All Carrera & Panamera Models 2009 onwards, except 911 Turbo or GT3 -
Wiper Arm Flange Lock Nut Also for All Exhausts & 911 Engine case (Sold Each)
SKU:N.011.008.8
In StockSize M8 (13mm)