You have no items in your shopping cart.
Clutch, Gearbox & Transmission
Clutch, Gearbox & Transmission
-
911 G50 Gearbox Link coupler adapter 1987-Onwards
SKU:SR061
Out of StockThis plated steel adapter allows our G50 Precision Shift Coupler (SR060) to simply be bolted onto the stock shift tube without having to weld or modify the tube. Unlike the stock factory coupler, when the SR060 and SR061 are combined, the shifter can be set fore and aft, as well as side to side- allowing for exact synchronization, and a custom setup. Great for both street and track. -
Aasco Flywheel 911 SC 1978-1983 9 Bolt
SKU:106408.12
In StockFor 911 SC ModelsAasco Flywheels Features: Direct replacement, Used with OEM clutch or Sachs performance, Lightweight for improved engine flexibility, Designed for street use for performance enthusiasts. -
ARP Engine Block to Transmission Nut & Stud Kit All Porsche 911 1965-Onwards
SKU:19123
Out of StockHigh Tensile M10 Studs inc Starter Motor mounting stud -
Clutch Centre Plate Disc Porsche 924 Turbo /924S & 944 /944S & S2 1979-1992 OEM
SKU:18642
In StockUprated Centre plate. Fits All 225mm Clutch & Cover plates made after 1986. Note. will not replace the really Early Rubber type plate without the Updated Later Clutch Cover being fitted first. Note Not for 944 Turbo or 968 -
Clutch Release Bearing Guide Tube 3.2 Carrera G50 964 993 996 997 Turbo & GT3
SKU:950.116.813.06
In StockGuide Tube for all G50 Derived Manual Gearboxes 1987-2012 -
EuroCupGT Billet Alloy Short Shift Kit All 5 & 6 Speed Maual Models 1997-2012
SKU:3487
In StockThis easy to install EuroCupGT kit comes with full fitting instructions D.I.Y job which takes 1 -1.5 hours to install. Reduces travel by 25% All 5 & 6 Speed manual models inc Turbo & GT3 (not for Tiptronic models). Note Please check your car is Right ot Left Hand Drive before ordering. -
EuroCupGT Crank Case Breather ( K&N Type ) Chrome top 10-15mm inlet
SKU:11188
In StockSmall Cotton Gauze Filter ideal for Crank case Breather & air intake bypass pipes. aprox 40mmx50mm with small rubber inlet 10mm -15mm pipe. -
Front CV Joint Drive shaft Bolt All 964 993 996 & 997 C4 C4S GTS & Turbo 1989-12
SKU:900.067.211.09
In StockCV Bolt for All Carrera 4 4S & Turbo 4 wheel drive cars. Sold Each (6 per Joint) 1989-2012 -
Front Outer CV Boot Kit for 996 / 997 / Turbo / C4 & C4S 1999-2012
SKU:996.349.291.00
In StockOEM Front Outer Drive Shaft Boot. Sold Each ( 2 per car ) -
Gear Cable to Gear Shift Link Ball Socket. All Models OEM Porsche 1997-2012
SKU:19833
In StockFits Bottom of Gear Stick ( Ball Type socket ) -
Gear Shift Side Link to Cable. All models OEM Porsche 1997-2012
SKU:996.424.145.01
In StockOEM Link Fits on White Side Link ( Not directly to Lever ) -
Gearbox Gasket Set 911 G50 / 964 / 993 & 930 / 996 & 997 Turbo & GT3 1974-2012
SKU:1367
In StockFor All 911 G50/50 based 4/5 & 6 speed Gearboxs (with hydraulic clutch) -
Hand Turned 917 / 911 R Wood Gear Knob Part Fits Classic Porsche 1965-1986
SKU:Wood917SC
In StockHigh Quality Classic Race Car Detail, turned from laminated mahogany and maple. Because timber is a natural product the colours and grain can vary slightly, thus Every gear knob is unique because of this. These are supplied pre drilled, with the hole diameter and an OE metal crush sleeve to hold the knob in place. Standard Fit on All Cars 1965-1986 Note. For G50 Carrera 964 & 993 will require adaptation -
KAAZ Limited Slip Differential 911 (915) 924 Turbo & 930 Turbo 1972-1988
SKU:KAAZLSD-915-4MT
Out of StockWelcome to the KAAZ limited slip differential. Competition vehicles demand the up most from your differential and at times can push this component beyond it's boundaries. The KAAZ Limited Slip Differential is precision engineered to endure this type of "punishment". Our reliable and highly competitive differential has proven it's worthiness in professional racing vehicles all over the world. Don't settle for anything less the the industry leading KAAZ Limited Slip Differential. Fits all 911 models up to 1986 with the 915 5 Speed gearbox, all 911/930 Turbo models up to 1988 (with 4 Speed Gear box). Also 924 Turbo & 924 With Dog Leg 5 Speed Gearbox 1979 -1983 -
KAAZ Limited Slip Differential 911 G50 930 Turbo 5 Speed & 964 / 993 1987-1998
SKU:KAAZLSD-G50-MT
Out of StockWelcome to the KAAZ limited slip differential. Competition vehicles demand the up most from your differential and at times can push this component beyond it's boundaries. The KAAZ Limited Slip Differential is precision engineered to endure this type of "punishment". Our reliable and highly competitive differential has proven it's worthiness in professional racing vehicles all over the world. Don't settle for anything less the the industry leading KAAZ Limited Slip Differential.Fits all 911 3.2 G50 Gear Box Carrera models 1987-1989, 930 Turbo model 1989 Only with the 5 Speed gearbox, All Non turbo 964 & 993 models with the Manual Gearbox 1987 -1998 -
Lightweight aluminium Flywheel to fit a Porsche 911 1970-1977 6 Bolt Crank
SKU:106403.12
In StockFor 911 2.2 / 2.4 / 2.7 ModelsAasco Flywheels Features: Direct replacement, Used with OEM clutch or Sachs performance, Lightweight for improved engine flexibility, Designed for street use for performance enthusiasts. -
Lightweight Flywheel 7Kg 996 & 997 Carrera 3.4L & 3.6L 1998-2009 (Not Turbo/GT3)
SKU:106411.11
Out of StockFor 3.4 & 3.6 996 Models & 3.6 997 Models, Direct replacement, Used with OEM clutch or Sachs performance, Lightweight for improved engine flexibility, Designed for street use for performance enthusiasts. Weight: saving of aprox 60% -
Lightweight Flywheel fits Porsche 997 Carrera S 3.8 Gen-1 2005-2009
SKU:106417.11
In StockFor 3.8 997 S Models, Non TurboAasco Flywheels Features: Direct replacement, Used with OEM clutch or Sachs performance, Lightweight for improved engine flexibility, Designed for street use for performance enthusiasts. Weight: saving of aprox 60% -
Lightweight Flywheel Fits Porsche Boxster & Cayman Models 6Kg All Models 1997-On
SKU:106412.11
Out of StockFor All Models, Inc 2.5L / 2.7L / 2.9L / 3.2L & 3.4L Direct replacement, Used with OEM clutch or Sachs performance, Lightweight for improved engine flexibility, Designed for street use for performance enthusiasts. Weight: saving of aprox 60% -
Lightweight Single Mass Flywheel fits Porsche 964 & 993 C2/C4/ RS 1989-1998
SKU:106413.11.964
Out of StockLightweight Flywheel for All 964 & 993 / Turbo. Flywheels Features: Direct replacement, Used with OEM clutch or Sachs performance Clutch, Lightweight for improved engine flexibility, Designed for street use for performance, Race & Rally . Weight: saving of aprox 60 -70% over the factory Duel Mass Flywheel. -
M10 Flang Nut For Suspension All Models 1965-Onwards
SKU:999.076.053.01
In StockOEM Porsche Flange Nut For All Suspension, Engine, Chassis & Gearbox applications -
Mountig Bolt Kit for Engine & Gearbox Stand
SKU:SR028
In StockSecures your engine or Gearbox to the engine Stand yoke. No need for sockets, washers, and oversized nuts to take up slack. Use these knurled nuts and adapters to mount the different length case studs to the yoke. These adapters allow clearance for mounting the clutch. Hard-coated aluminium nuts and stainless steel sleeves. 1 Set For All Models. Note dose not include the Blue Bracket in the picture which is shown for descriptive purposes only. -
Performance Clutch Plate Porsche 3.2 G50 964 993 930 944 996 & 997 Turbo GT3 RS
SKU:930.116.014.02
In StockPerformance Sprung Clutch Drive Plate. Uprated for All standard & Turbo Applications. Ideal for Road & Race. 240mm Diameter. Standard Fit for; 924 & 944 Turbo, 911 3.2L G50 Carrera, 930 Turbo 3.0L & 3.3L, 964 & 993 RS, & 996 / 997 GT3 RS. Can also be used with Single Mass Flywheels on all; 968, 964, 964 Turbo, 993 & 996 / 997 Turbo Models 1974 -2012 -
Performance Clutch Plate Porsche 964 968 993 996 997 911 GT3 944 Turbo 1986-2012
SKU:17055
In StockThis Sachs Performance clutch disc replaces the factory clutch plate. Uprated RS type, ideal for track days and high Horse power cars. Size 240mm x 23 Spline Note. for All G50 Gearboxes & also 944 Turbo & 968 / Club Sport -
Porsche 911 Factory OE Short Shift Kit fits All 911 & 912 Models 1972-1986
SKU:5428
In StockThis 911 Factory OE Porsche SC-RS shift kit reduces the shift throw of pre-1985 911's by 20% ; because of an interim short-throw design, 1986 models shift throws will be reduced 10% percent. Complete kit includes everything you need for faster, more satisfying gearbox control. Factory Original Porsche Kit -
Sachs Performance Clutch Centre Plate Disc fits All Porsche 1978-2012
SKU:18772
In StockSachs Performance 240mm / 23 Spline Organic disc for All Models 1978 -2012 -
Semi Solid Billet Engine & Transmission Mounting Bushes 911 / 930 Turbo 1965-89
SKU:SR016
In StockBy using computer engineering and digital design STOMSKI RACING has developed the FIRST truly symmetrical 911 Semi-Solid Engine/Transmission Mount, thus allowing you to run stiffer mounts without sacrificing comfort or ride quality. Our symmetrical design allows you to custom tune your ride- determining feel, function, and fun. We provide 3 different durometers of inserts that allow you to custom tune your ride, now, and later if your application might change. Because our SS mounts are SYMMETRICAL, you can now properly use them either as an engine mount OR inverted as a transmission mount. Unlike other non-symmetrical SS mounts, there is no compromise when using SR016 inverted as a transmission mount because SR016 is symmetrical and thus FULLY supports and FULLY absorbs in BOTH positions/directions. Road tested and track proven, STOMSKI RACING's SR016 provides better shifting, better weight transfer, better handling, crisper throttle response, better acceleration, and of course GREAT looks, without any loss of comfort. Mounting comes complete with an aluminium housing, stainless steel sleeve and disks spacers & a M12 Schnorr washer. Sold as 1 Pair (2x Mountings) -
Semi Solid Gearbox Transmission Mounts 911 / 930 Turbo 1965-1989
SKU:SR017-1
In StockBy using computer engineering and digital design STOMSKI RACING has developed the FIRST truly symmetrical 901/911/930 Semi-Solid Transmission Mount, thus allowing you to run stiffer mounts without sacrificing comfort or ride quality. Our symmetrical design allows you to custom tune your ride- determining feel, function, and fun. Because our SS mounts are SYMMETRICAL, they more evenly distribute the load and provide more support, as well as more thoroughly isolate vibration and prevent harshness transfer to the cabin. Unlike other non-symmetrical SS mounts, there is no compromise when using STOMSKI RACING's SR017 because our mounts are symmetrical and thus Road tested and track proven, STOMSKI RACING's SR017 provides better shifting, better weight transfer, better handling, crisper throttle response, better acceleration, and of course GREAT looks, without any loss of comfort. Each mount comes complete with two aluminum housing shells/halves, stainless steel sleeve and disks/spacers(2), an M12 Schnorr washer Application includes all 901 and 911 transmissions from 1965 through 1971 and 930 transmissions from 1976 through 1989. Installation involves simply pressing out the worn rubber from the factory transmission bracket and slipping in an SR017 housing . Sold as 1 Pair (2x Mountings) -
Single Mass Lightened Flywheel Fits Porsche 996 997 Turbo GT3 GT3RSRS 1999-2012
SKU:106413.11
In StockFor All 996 & 997 Turbo, GT2, GT3 & GT3RS models. Replaces the duel Mass OE factory Flywheel. Fly wheel Features: Direct replacement, Use with OEM RS organic clutch or Sachs performance Clutch. Lightweight for improved engine flexibility, Designed for Road & Track use by performance enthusiasts. Weight: saving of aprox 60 -70% with minimum Torque loss. Hardened high carbon steel face. Comes with timing gear, 9x mounting bolts, mounting Ring & Spigot Bearing. For a Fitted quotation please call 0121 585 6088 -
Spigot Bearing Porsche 924S 924 Turbo 944 968 964 993 / 996 & 997 GT3 RS & GT2
SKU:3838
In StockOEM sealed Bearing for all Single Mass & Club Sport / RS Fly Wheels. inc Aasco & Motorsport.