Seats, Safety & Interior Trim

911 R / ST / RS / RSR Front Windscreen Securing straps. Laser cut alloy. Folded to match the Windscreen profiles. Blank ready to be drill to suit your type of fastenings. Ideal for Race & Rally Lexon & Perspex Windscreens

911 R / ST / RS / RSR Front Heater Box Delete / block off plates. Kit includes; 2x center covers , 2x outer covers & 4x gaskets.

911 R / ST / RS / RSR Left Hand Aluminum Foot Rest in a style to match our 911R foot boards. 2.5mm sheet. Rivet or bolt on.

911 R / ST / RS / RSR R-Gruppe Style Right Hand Drive floor boards Made as per 911R floor board but out of aluminium for the R-Gruppe look (Pair)

911 R / ST / RS / RSR style Rear Shift linkage cover Fits All Models 1965-1989. Material; 3mm Alloy.

Ideal for Front Bonnet and Rear Engine Lid or Glass Hatch

Sold as a pair, these handles are Ideal for that Retro R, RS & RSR look. Used in conjunction with the plain ( pocketless ) door trims these easy to fit handles finish off any restoration or back-dated interior ( fits all cars 1965-1998 ). Price per pair.

Early repoduction LWT seat brackets. Ideal for the Classic Recaro low back or Shell Back Seats and Club Sport Racing Seats. Sold per seat (1 Pair)

Genuine OEM Porsche 330mm Steering wheel in Black Alcantara with Porsche Crest. Standard fit on 911 GT3 Cup / 997 RSR & Cayman GT4-R. Ideal for road & Track Use with good leg Clearance. Fits All Porsche Models. Requires Boss Kit. Note; Please use Year & Model drop downs when checking out. Note. No Horn button. You will need to fit a switch on your dashboard for Road use. Generic Picture. Steering wheel dose not include Carbon Button panel or wires.

Plug-In Airbag Resistor allows users the freedom to fit non-airbag hub kits to vehicles equiped with an airbag by canceling the dash mounted warning light which illuminates if the ECU senses a change to the airbag status. Please Note: This product is designed to cancel the airbag warning light, thus disabling the airbag system. Quantity Required for Each car; Order x1 for; 928 968 964 993 996 Carrera Turbo & GT3 986 Boxster (All Cars 1989-Upto-2004) Order x2 for; 987, 981 & 718 Boxster & Cayman / GT4 997, 991 Carrera Turbo & GT3 Panamera Cayenne & Macan (x2 for All cars 2003 -Onwards)

Alloy cover for the rear transmission linkage tunnel. Fits all Porsche 911 up to 1989.

For all Momo EuroCupGT Sparco & OMP after market none air bag Steering wheels. Also RAID & personel. Applications 964 993 968 928 1992 -1995 996 986 Boxster

Satin finish stainless steel. Fits Porsche 911 964 993 924 944 & 968 with non-power seats. Attaches to factory seat track hardware under front Seat.

Classic Carrera RS Style Handles. Universal Fit.

Price is per pair(2). Please state colour when ordering; Black Or Silver. Ideal for Motorsport. Can be used on all models with light weight trim

Ideal when replacing Porsche seats with EuroCupGT racing seats or other GT or Racing seats. Price each (One Kit )

Fully Certified racing seat to meet the latest compliance standard 8855-1999.These seats will accept a 4 or 5 or 6 point harness & comes complete with EuroCupGT 2 position Side mounts that also have the seat belt anchor points built in.Side Mounts are designed to fit Porsche Manual Runners,or direct to the floor using the EuroCupGT Flat seat Mounts. Also Compatible with EuroCupGT Runner kit ( Available separately )

Powder coated in durable black wrinkle-finish. Attaches to factory seat track hardware Under Front Seat

The 996/997 harness mount bar has been tested and to handle the types of forces required by a Motor Vehicle Seat Belt Anchorages-Performance Requirements. The 996/997 harness mount bar properly locates and supports racing shoulder harnesses relative to the driver. In the case of an accident, it helps protect the driver's shoulders. The harness guides also prevent excessive shifting and fatigue of the driver during the high G loads of cornering and braking. The bars are easy to install and remove, use only existing holes and mounting points, and will not damage the car in any way. Strength requirements for harness mounts are considerably greater than those for harness guide bars since they must support the entire load applied to the belts. A mount really can't be relied on unless it has been tested to support the loads required. Material: Type 304, stainless steel Finish: Powder coated in durable black Models: 996/997 Coupe.

Cayman Harness Truss is a unique mounting system that helps to position the driver using fixed attachment locations for harness straps. Made of aluminum & stainless steel for superior strength & support, yet it is lighter than tubular or steel bars. Easy to install & remove, utilizing existing factory mounting points.

OEM Race part for all cars 1982 -Onwards Length; 40mm through bumper boss + strap (75mm Long )

OEM Race part for all cars 1982 -Onwards Length; 75mm through bumper boss + strap (90mm long)

Low Oil Pressure Indicator Light All PORSCHE 911 / 964 / 993 & Turbo Models. Specially designed to replace and fit in place of the dash mounted clock - 80mm Dia. Black Anodized Billet Aluminum Bezel and bright warning light. Includes wiring to redirect from original oil pressure indicator gauge. Specially designed to get your attention when driving to avoid engine damage on low engine oil pressure. Ideal for Historic Race & Rally cars

Price is per pair (2) Checker Plate design for all Early air cooled 911's Note. Only for Right Hand Drive Cars such as; UK, Ireland, Australia etc.

For Manual Window Mechanism, Black Manual Window Winder crank Handle fits; 911 964RS 993GT2 924 944 968 Club Sport 1965 -1998 ( Item no 4 on 2nd image ) Sold Each (1) these are Not handed.

964 / 993 RHD Drivers side floor board. R styled floor boards in Aluminum for Manual cars

FIA Approved Classic design with flared thigh support, this racing seat is best suited when easy access in and out of the car is required. Featuring suede wear protection in both the shoulder and thigh areas and a racing-heritage inspired quilted centre panel.

Full Race Approved Modern Hans Seat for all Motorsport & GT applications. With an integral head restraint, the 4009HR series of seats is a "go-to" safety essential for many forms of rally and circuit racing. This range is suitable for competition where 270 degrees of head support is required. Weight 8.7Kg Similar Seat to the Porsche Motorsport Cayman GT4 & 2019 991 GT3R (RSR)

This Professional Motorsport Racetech Seat offers ergonomic form and incredible features in a lighter and more affordable package. Used by many professional teams at both national and international level. This is the lightweight version, made from a precise recipe of carbon and Kevlar weaves to acheive shell weights as little as 4.4kg! The Air Feed Device provides extra cooling to the driver and can be connected to the cars Air Conditioning System. Sizes available; Standard, and Tall to fit most driver shapes. Customise your seat further with low base cushions or add side cushions for support in the thigh area. The 9119 series seats are compliant with Full International FIA 8855-1999 standards if Required. Note; To comply with FIA 8855-1999, the 9119 series seats must be back-mounted to the rollcage at shoulder level. Back-mounting can be achieved using Racetech parts; RTB2115B and RTB2005C. Back-mounting improves seat strength and stability during an impact, increases driver 'feel' and reduces driver fatigue.

RTB2005C Racetech aluminium clamps for back-mounting seats. Precision cut from a 20mm thick 5083 alloy sheet. Sold as a pair, these clamps fix around a rollcage tube and bolt to the RTB2005B bracket. This allows you to quickly and effectively back-mount a Racetech 9119 series seat to the chassis / rollcage at the shoulder level. Supplied with 2x M8 bolts and 2x flat washers. Note; there are Three Size of Roll Cage Tube fitting options that can be ordered; 38mm ( 1 1/2") 41mm ( 1 5/8") 44.5mm (1 3/4")

RTB2115B: Racetech 5mm aluminium (5083) bracket for back-mounting seats. This bracket bolts to the shoulder beam of Racetech 9119 series seats and working in conjunction with RTB2005C clamps, allows you to fix the seat to the lateral / diagonal rollcage tube. Requires four holes drilled to bolt on the clamps once you have the seat setup in the optimum driving position.

The RT1000 meets the demands of the motorsport enthusiast, with all the function but none of the frills. Weighing in at a lean 8.9kg (total) and homologated to FIA standards. FIA 8855-1999 Homologation. Shell weight: 6.6kg

This non-homologated seat is designed for road use. Born of the RT4000W, but with reduced wings at the thigh for improved access and egress. The RTROAD is compatible with 3 or 4 point harnesses. Not recommended for competition use. 

GT3RS & GT4 Spec. Comes with 2x Rubber Mats

Reacaro name speaks for itself, Glass fiber reinforced plastic GRP. The pronounced seat cushion & seat back bolsters offer optimum vehicle control in extreme driving situations weighs 7kg FIA approved

Reacaro name speaks for itself, Glass fiber reinforced plastic GRP. The pronounced seat cushion & seat back bolsters offer optimum vehicle control in extreme driving situations weighs 7kg FIA approved

Red Black Yellow Blue & Silver. Price is per car Kit (pair). Please state colour when ordering; Red Black Yellow Blue & Silver. Can be retro fitted to All Models inc 944 968 996 GT3 Cup & 986 Boxster etc. Ideal for Race & Track Cars.

Now you can provide forced air induction to your Racetech 119 or 129 series race seat. Increase driver comfort by removing latent heat to the lower back. Especially useful in longer or enduro race events, this air cooling maintains a level of comfort for the driver, enabling optimum performance and less heat stress and fatigue. Kit includes: 12VDC inline cooling blower - 122 CFM Silicone reducer - 76mm > 51mm 51mm flexible duct hose - 1250mm long Use with a NACA or roof duct and 3 (76mm) intake hose for maximum performance. Use with a NACA or roof duct and 3 (76mm) intake hose for maximum performance.

Racing developed brackets & mounts designed to attach seats. Sub frames are designed to fix to the standard chassis floor allowing the appropriate seat mounting brackets between these subframes & your seat of choice. We sell the full range of seat fixing brackets & runners, including Recaro, Sparco, Brey Krause etc. For Passenger Seat in Right hand drive cars & Drivers seat in Left Hand Drive cars

Racing developed brackets & mounts designed to attach seats. Sub frames are designed to fix to the standard chassis floor allowing the appropriate seat mounting brackets between these subframes & your seat of choice. We sell the full range of seat fixing brackets & runners, including Recaro, Sparco, Brey Krause etc. For Drivers Seat in Right hand drive cars & Passemger seat in Left Hand Drive cars

RTB1003S: Racetech zinc-plated, 3mm thick steel brackets for side-mounting race seats. Sold as a pair. These brackets are suitable for use with the following seat models: RT1000 & RT4000W

RTB1005M: Racetech milled aluminium bracket for side mounting seats. This pair of mounts is the same shape and hole spacing as the RTB1003S but half the weight. 5mm thick 5083 alloy. Fits the following seat models: RT1000 & RT4000W

RTB1009M: Racetech mill-finish 5083 aluminium brackets for side-mounting seats. 5mm thick. Sold as a pair.

EuroCupGT-Pro ADJUSTABLE RACE SEAT BRACKETS. These seat frames have been developed specially for maximum strength, rigidity and longevity. ( one Pair / Seat ) Can Be Solid Mounted to Floor or mounted to Porsche or EuroCupGT seat Runners. Fits All; GT3, GT4, Recaro, Sparco, OMP & EuroCupGT Seats.

Full Seat Fitting Kit for EuroCupGT shell back Seat range for All Late Model Cars 996 997 Boxster & Cayman. Includes runners, side mounts with threaded seat belt anchors & Floor mounting plates. Can also be used on other aftermarket & Porsche racing seats.