Due to business re-location, we are unable to take any orders until further notice. Please contact us via the Contact Us page with any queries regarding existing orders.
We are sorry for any inconvenience
Choose Currency

Suspension & Steering

Suspension & Steering

  • 911 R / ST / RS / RSR Front Strut brace brackets inc bolts & spacers 1965-1989

    SKU:ST911R-Front Strut brace brackets

    In Stock In Stock
    £131.99 inc VAT £109.99 ex VAT
  • 911 R / ST / RS / RSR Rear shock tower support brackets 1965-1989 (Two pairs)

    SKU:ST911R-Rear shock tower brackets

    In Stock In Stock
    911 R / ST / RS / RSR Rear shock tower support brackets ready to weld on to the Rear shock towers. Made from an original pattern but contoured for better fitment. Each set will need a slight tweek to match the location as all early 911's are hand made so no two cars are the same. Set comes as 4 parts (Two pairs / 1 car)
    £92.39 inc VAT £76.99 ex VAT
  • 991 GT3 Cup & Cayman GT4-R OE Porsche Steering wheel Alcantara All 1965-On

    SKU:17051

    In Stock In Stock
    Genuine OEM Porsche 330mm Steering wheel in Black Alcantara with Porsche Crest. Standard fit on 911 GT3 Cup / 997 RSR & Cayman GT4-R. Ideal for road & Track Use with good leg Clearance. Fits All Porsche Models. Requires Boss Kit. Note; Please use Year & Model drop downs when checking out. Note. No Horn button. You will need to fit a switch on your dashboard for Road use. Generic Picture. Steering wheel dose not include Carbon Button panel or wires.
    £550.00 inc VAT £458.33 ex VAT
  • Adjustable Anti Roll Bar Drop Link Kit Front All 964 993 & 996/997 C4S Turbo GT3

    SKU:19451

    In Stock In Stock
    Ideal for All Standard, H&R and AP Anti Roll bars where added compliance is required on setup. Front for; 964 All 993 All 996 C4S Turbo GT2 & GT3 997 GT2 & GT3 Also use on Bilteine Coil Over Kits on All Carrera Models. Note. Please use Year & Model drop downs when checking out
    £131.99 inc VAT £109.99 ex VAT
  • Adjustable Anti Roll Bar Drop Link Kit Rear All Models 1978-Onwards ( Pair )

    SKU:19450

    In Stock In Stock
    Ideal for All Standard. H&R and AP Roll bars where added compliance is required on setup.
    £109.98 inc VAT £91.65 ex VAT
  • AirBag Warning Light de-activation Bypass Resistor / Remove Air bag Plug-in type

    SKU:Resistor1

    In Stock In Stock
    Plug-In Airbag Resistor allows users the freedom to fit non-airbag hub kits to vehicles equiped with an airbag by canceling the dash mounted warning light which illuminates if the ECU senses a change to the airbag status. Please Note: This product is designed to cancel the airbag warning light, thus disabling the airbag system. Quantity Required for Each car; Order x1 for; 928 968 964 993 996 Carrera Turbo & GT3 986 Boxster (All Cars 1989-Upto-2004) Order x2 for; 987, 981 & 718 Boxster & Cayman / GT4 997, 991 Carrera Turbo & GT3 Panamera Cayenne & Macan (x2 for All cars 2003 -Onwards)
    £19.79
  • EuroCupGT Adjustable Rear Upper Control Arm Kit 996 / 997 Carrera, GT3 & Turbo

    SKU:7370

    Out of Stock Out of Stock
    Set of 4 Heave duty adjustable rear upper control arms. Ideal for Camber set ups and clearance, when using larger wheel & tyre sizes where Geometry is limited with standard control arms. All models 1998-2012
    £439.98 inc VAT £366.65 ex VAT
  • EuroCupGT Adjustable Tension Control Arms 996 Fr & Re / 986 Front & 997 Rear

    SKU:EURO6435

    In Stock In Stock
    EuroCupGT uprated suspension tension bars replace the cast aluminium arms & allow for neutral adjustment when setting up your cars geometry. The rubber bushing is replaced with a Rose Joint to allow for more accurate handling. Fits the following: All 996 Models inc GT3 & Turbo Front & Rear All Boxster 986 Front Only All 997 Models inc GT3 & Turbo Rear Only
    £329.99 inc VAT £274.99 ex VAT
  • EuroCupGT Billet Front Chassis Strength Plates Porsche 996 997 Boxster Cayman

    SKU:18934

    In Stock In Stock
    These EuroCupGT-Pro Billet Plates add Strength to the factory Wing Panel & can be used with Standard or Motorsport Top Mounts. ( Sold as a Pair ) Fits All Models 1997 -2012
    £65.99 inc VAT £54.99 ex VAT
  • EuroCupGT Porsche Boxster 986 Rear Strut Brace Carbon Fibre 1997-2012

    SKU:12708

    In Stock In Stock
    £137.49
  • EuroCupGT Rear Adjustable Tension Control Arm Porsche 986 987 Boxster Cayman -12

    SKU:EURO6435BOX

    In Stock In Stock
    EuroCupGT uprated rear suspension tension bars replace the cast aluminium arms & allow for neutral adjustment when setting up your cars geometry. The rubber bushing is replaced with a rose joint to allow for more accurate handling. Fits the following: All Boxster 1997 -2012 All Cayman Models 2005 -2012
    £329.99 inc VAT £274.99 ex VAT
  • EuroCupGT-Pro Bilstein Coil-Over Spring Seat & Locking Ring 2 1/2" 63mm (1)

    SKU:18940

    Out of Stock Out of Stock
    2 1/2-INCH (63MM) LOWER SPRING SEAT PLATFORM or LOCKING RING. For Bilstein & EuroCupGT-Pro Coil Over Kits. Manufactured from HE30 Aluminium, for use supporting the spring coil over. These are one of the most popular parts in our suspension range, this adapter is lightweight and has been developed specially for maximum strength and control. Sold Each (1)
    £26.39 inc VAT £21.99 ex VAT
  • EuroCupGT-Pro C Spanner for 2 1/2" 63mm for Porsche Bilstein Suspension Rings

    SKU:18947

    In Stock In Stock
    2 1/2-INCH (63MM) PRECISION C SPANNER FOR All Porsche Bilstein Koni & EuroCupGT Suspension. The Pro C spanner is for the ease of adjusting on the ride height of your Porsche without damaging the aluminium platforms and locking rings. This is a drop forged professional spanner.
    £22.00 inc VAT £18.33 ex VAT
  • EuroCupGT-Pro C Spanner for 2 1/4" 57mm for Porsche & Bilstein Suspension Rings

    SKU:18948

    In Stock In Stock
    2 1/4-INCH (57MM) PRECISION C SPANNER FOR All Porsche Bilstein Koni & EuroCupGT Suspension. The Pro C spanner is for the ease of adjusting on the ride height of your Porsche without damaging the aluminium platforms and locking rings. This is a drop forged professional spanner.
    £19.79 inc VAT £16.49 ex VAT
  • EuroCupGT-Pro Coil-Over Assister Spring Seat Retainer Ring 2 1/2" 63mm (1)

    SKU:18943

    In Stock In Stock
    2 1/2-INCH (63MM) HELPER SPRING PLATFORM. The 2 1/2" Double Helper Adaptor manufactured from HE30 Aluminium, for use when fitting helper spring. These are part of the EuroCupGT-Pro suspension range, but can be used on all 2 1/2" 63mm Spring Setups inc Bilstein & Koni etc. This adapter is lightweight and has been developed specially for maximum strength and control. ( Sold Each )
    £39.59 inc VAT £32.99 ex VAT
  • EuroCupGT-Pro Coil-Over Assister Spring Seat Retainer Ring 2 1/4" 57mm (1)

    SKU:18942

    In Stock In Stock
    2 1/4-INCH (57MM) HELPER SPRING PLATFORM. The 2 1/4" Double Helper Adaptor manufactured from HE30 Aluminium, for use when fitting helper spring. These are part of the EuroCupGT-Pro suspension range, but can be used on all 2 1/4" 57mm Spring Setups inc Bilstein & Koni etc. This adapter is lightweight and has been developed specially for maximum strength and control. ( Sold Each )
    £39.59 inc VAT £32.99 ex VAT
  • EuroCupGT-Pro Front Camber Plates Motorsport Monoball Top Mounts 1989-1998 (Pair

    SKU:18946

    In Stock In Stock
    Similar to the 964RS & 993RS Cup & RSR mountings, these Billet Front Top mounts are Ideal for Fast Road, Track & Race cars. Can be fitted with Standard or Coil-Over Kits for full Camber Adjustment. Note. Bilstien B9 & Other aftermarket Coil Over kits do not come with Top Mounts. ( Sold in Pairs )
    £329.99 inc VAT £274.99 ex VAT
  • EuroCupGT-Pro Front Coil Over Universal Conversion Kit All Models (One Axle Pair

    SKU:18936

    Out of Stock Out of Stock
    Designed to fit over your standard Front Damper Cases, this kit allows the use of 2 1/2" (63mm ID) Motorsport Springs. These Spring Conversion kits are ideal for Bilstein & Koni applications. Manufactured from HE30 Aluminium, this spring conversion kit gives you the option to adjust the ride height & corner Weights of your Porsche very effectively. These are lightweight and have been developed specially for maximum strength and control. Note. On most models you will need to have the Standard spring seats removed to allow for clearance over the damper tube. Can Be used on Front or Rear Applications as required.
    £164.99 inc VAT £137.49 ex VAT
  • EuroCupGT-Pro Front GT3 Type Coil-Over Spring Top Hats 2 1/2" 63mm All Models (2

    SKU:18938

    In Stock In Stock
    These 2 1/2-INCH (63MM) Top Spring Retainers come with a a 10mm pilot hole which can be drilled if needed to 12mm or 14mm or as required. Ideal for Bilstein & Koni or GT3 applications. Manufactured from HE30 Aluminium, for use supporting spring coil-over. These are one of the popular parts in our suspension range, thes retainers are lightweight and have been developed specially for maximum strength and control.
    £65.99 inc VAT £54.99 ex VAT
  • EuroCupGT-Pro GT3 Adjustable Front Top Mounts Porsche 996 997 Boxster & Cayman

    SKU:18933

    In Stock In Stock
    EuroCupGT-Pro GT3 & GT3RS Adjustable Camber Front Top mountings, these Billet Front mounts are Ideal for Fast Road, Track Day & Race & Rally cars. Can be fitted with Standard or Coil-Over Suspension Kits. ( Sold as a Pair ) Note. Bilstien B9 & Other aftermarket Coil Over kits do not come with any Top Mounts.
    £395.99 inc VAT £329.99 ex VAT
  • EuroCupGT-Pro Motorsoprt Adjustable Fork Arms All 996 & Boxster 986 1997-2004

    SKU:18930

    Out of Stock Out of Stock
    Race Proven, these adjustable Fork Arms are modeled on the Porsche Motorsport RSR fitment. ( sold as a Pair ) 996 Carrera Turbo & GT3/RS Fits Front & Rear ( Requires one Pair for each Axle ) 986 Boxster Front Only
    £329.99 inc VAT £274.99 ex VAT
  • EuroCupGT-Pro Motorsoprt Adjustable Fork Arms All 997 Rear & GT3 / RS Front

    SKU:18931

    Out of Stock Out of Stock
    Race Proven, these adjustable Fork Arms are modeled on the Porsche Motorsport RSR fitment. ( sold as a Pair ) 997 Carrera C2S C4S GTS Turbo & GT3/RS Rear On; All 997 Models Front Only On; 997 GT2 GT3 & GT3 Cup
    £329.99 inc VAT £274.99 ex VAT
  • EuroCupGT-Pro Rear Coil Over Universal Conversion Kit All Models (One Axle Pair)

    SKU:18937

    Out of Stock Out of Stock
    Designed to fit over your standard Rear Damper Cases, this kit allows the use of 2 1/4" (57mm ID) Motorsport Springs. These Spring Conversion kits are ideal for Bilstein & Koni applications. Manufactured from HE30 Aluminium, this spring conversion kit gives you the option to adjust the ride height & corner Weights of your Porsche very effectively. These are lightweight and have been developed specially for maximum strength and control. Note. On most models you will need to have the Standard spring seats removed to allow for clearance over the damper tube. Can Be used on Front or Rear Applications as required.
    £171.59 inc VAT £142.99 ex VAT
  • EuroCupGT-Pro Rear GT3 Type Coil-Over Spring Top Hats 2 1/4" 57mm All Models (2)

    SKU:18939

    In Stock In Stock
    These 2 1/4-INCH (57MM) Top Spring Retainers come with a a 10mm pilot hole which can be drilled if needed to 12mm or 14mm or as required. Ideal for Bilstein & Koni or GT3 applications. Manufactured from HE30 Aluminium, for use supporting spring coil-over. These are one of the popular parts in our suspension range, thes retainers are lightweight and have been developed specially for maximum strength and control.
    £65.99 inc VAT £54.99 ex VAT
  • EuroCupGT-Pro Rear Motorsport Monoball Top Mounts (Flat Type) 1989-1998 (Pair)

    SKU:18945

    In Stock In Stock
    Similar to the 964RS & 993RS Cup & RSR mountings, these Billet Rear mounts are Ideal for Fast Road, Track & Race cars. Can be fitted with Standard or Coil-Over Kits. Note. Bilstien B9 & Other aftermarket Coil Over kits do not come with Top Mounts. ( Sold in Pairs )
    £220.00 inc VAT £183.33 ex VAT
  • EuroCupGT-Pro Rear Motorsport Monoball Top Mounts All 996 & 997 Models 1997-2012

    SKU:18944

    Out of Stock Out of Stock
    Similar to the GT3 Cup & RSR Race mountings, these Billet Rear mounts are Ideal for Fast Road, Track & Race cars. Can be fitted with Standard or Coil-Over Kits. Note. Bilstien B9 & Other aftermarket Coil Over kits do not come with Top Mounts.
    £329.99 inc VAT £274.99 ex VAT
  • EuroCupGT-Pro Rear Type Coil-Over Spring Seat & Locking Ring 2 1/4" 57mm (1)

    SKU:18941

    Out of Stock Out of Stock
    2 1/4-INCH (57MM) LOWER SPRING SEAT PLATFORM or LOCKING RING. For EuroCupGT-Pro Coil Over Kits. Manufactured from HE30 Aluminium, for use supporting the spring coil over. These are one of the most popular parts in our suspension range, this adapter is lightweight and has been developed specially for maximum strength and control. Sold Each (1)
    £26.39 inc VAT £21.99 ex VAT
  • EuroCupGTBillet Front Chassis Strength Plates Porsche 996 997 Boxster & Cayman

    SKU:18935

    In Stock In Stock
    These EuroCupGT-Pro GT3 Billet Plates add Strength to the factory Wing Panel & can be used with Standard or Motorsport Top Mounts. ( Sold as a Pair ) Fits All Standard GT2 & GT3 / RS Models 1997 -2012 Also Any car using Porsche Stomski or EuroCupGT-Pro Top Mounts.
    £65.99 inc VAT £54.99 ex VAT
  • Front Strut Brace Porsche 996 & Boxster S Carbon Fiber Fits Porsche Turbo C4S

    SKU:00556

    In Stock In Stock
    This EuroCupGT carbon fibre strut brace is more rigid & significantly lighter than the steel ones. It is fully adjustable to make fitting easy. All parts required to fit are included. The overall weight is around 900g
    £197.99
  • GT3 CUP / RSR ADJUSTABLE CASTOR THRUST BUSH FOR COFFIN ARM

    SKU:SR087

    In Stock In Stock
    Whether doing a complete suspension upgrade, eliminating the overly-compliant rubber thrust arm bushings that lead to unpredictable camber changes, or searching for more range of adjustment for your suspension, STOMSKI RACING's Adjustable Thrust Arm Bushings are the answer to your needs.  Installing these high quality 6061 aluminum anodized bushings will provide better feedback and handling without leading to unwanted road noise on either your dedicated track car or daily driver.  By upgrading to STOMSKI RACING's Adjustable Thrust Arm Bushings for all four control arms on your car, unwanted suspension changes caused by the standard flexible bushings will be a thing of the past, and thus your lap times will improve as your handling increases.  Fits; Front All 996 / 986 Boxster. Rear; All 996 / 997 Carrera / GT3 / Turbo / GT2, 986 / 987 Boxster, and Cayman.  Sold as One set for 1 wishbone. ( 2 kits needed per axle )
    £104.41 inc VAT £87.01 ex VAT
  • GT3 Cup FIXED COFFIN ARM BUSHING 996 997 Carrera Turbo 986 987 Boxster & Cayman

    SKU:SR088

    In Stock In Stock
    Not all suspension upgrades will require an adjustable castor / camer arm bushing like the SR087, thus the STOMSKI RACING's Fixed Thrust Arm Bushings provide the perfect solution for your application a standard Geometry setting is all that is required to prevent unpredictable camber changes.  Installing these high quality 6061 aluminum anodized bushings will provide better feedback and handling without leading to unwanted road noise on either your dedicated track car or daily driver.  By upgrading to STOMSKI RACING's Fixed Thrust Arm Bushings for all four control arms on your car, unwanted suspension changes caused by the stock flexible bushings will be a thing of the past, and thus your lap times will improve as your handling increases.  Fits; Front; All 996 & 986 Boxster. Rear; All 996 / 997 Carrera / GT3 / Turbo / GT2, 986 / 987 Boxster, and Cayman.  Sold as One set for 1 wishbone. ( 2 kits needed per axle ).
    £131.99 inc VAT £109.99 ex VAT
  • GT3 Split Wishbone Ball Joint Front & Rear 1999-2012 GT3RS Cup & RSR

    SKU:1986

    Out of Stock Out of Stock
    OEM Wishbone Coffin Arm Front & Rear Applications. For All GT2 / GT3 RS. Also Motorsport Applications; on Boxster 996 & 997. Note. Handed so please denote Left or Right on ordering.
    £549.99
  • H&R Lowering Spring Kit All Carrera 2 & C2S 2005-2012

    SKU:2356

    Out of Stock Out of Stock
    High quality Smooth & progressive. For All 2 wheel drive Carrera models. -25mm
    £384.97 inc VAT £320.81 ex VAT
  • Lower Wishbone Control Arm Adjusting Shim 10mm GT3 / RS Coffin Arm 1997-On

    SKU:996.341.543.95

    In Stock In Stock
    £43.99
  • Lower Wishbone Control Arm Adjusting Shim 1mm GT3 / RS Coffin Arm 1997-On

    SKU:996.341.543.90

    In Stock In Stock
    £10.99
  • Lower Wishbone Control Arm Adjusting Shim 2mm GT3 / RS Coffin Arm 1997-On

    SKU:996.341.543.33

    In Stock In Stock
    £16.49
  • Lower Wishbone Control Arm Adjusting Shim 3mm GT3 / RS Coffin Arm 1997-On

    SKU:996.341.543.92

    In Stock In Stock
    £27.49
  • Lower Wishbone Control Arm Adjusting Shim 5mm GT3 / RS Coffin Arm 1997-On

    SKU:996.341.543.99

    In Stock In Stock
    £32.99
  • Lower Wishbone Control Arm Adjusting Shim 7mm GT3 / RS Coffin Arm 1997-On

    SKU:996.341.543.93

    In Stock In Stock
    £65.99
  • Lowering Spring Kit 996 Carrera 2 1998-2004 25mm-30mm

    SKU:2357

    In Stock In Stock
    EuroCupGT 996 Carrera 2 Lowers car by 25 -30mm Set of 4. 1998 -2004
    £263.99 inc VAT £219.99 ex VAT
  • Lowering Spring Kit 997 C2 / C2S 25-30mm

    SKU:1472

    Out of Stock Out of Stock
    Lowers car by 30mm Set of 4. For Standard 997 Carrera
    £401.45 inc VAT £334.54 ex VAT
  • M10 Flang Nut For Suspension All Models 1965-Onwards

    SKU:999.076.053.01

    In Stock In Stock
    OEM Porsche Flange Nut For All Suspension, Engine, Chassis & Gearbox applications
    £2.63 inc VAT £2.19 ex VAT
  • Motorsport Anti Roll Bar Blade For GT3 Cup GT3R & GT3RSR

    SKU:997.343.725.91

    In Stock In Stock
    For All Motorsport Applications Front & Rear.
    £395.99 inc VAT £329.99 ex VAT
  • Porsche Boxster Rear Motorsport Monoball Top Mounts (Flat Type) 1997-2012 (Pair)

    SKU:18902

    In Stock In Stock
    Similar to the GT3 Cup & RSR Race mountings, these Billet Rear mounts are Ideal for Fast Road, Track & Race cars. Can be fitted with Standard or Coil-Over Kits. Note. Bilstien B9 & Other aftermarket Coil Over kits do not come with Top Mounts.
    £329.99 inc VAT £274.99 ex VAT
  • Rear Adjustable Toe Link Kit Porsche 996 997 & 986 987 981 Boxster & Cayman

    SKU:7632

    In Stock In Stock
    EuroCupGT rear adjustable toe links arms adjusts camber & dials in the toe for the rear. These adjustable toe links are design to give you a more responsive rear end along with the ability to dial in the toe on the rear end more precisely. These do both Toe and vertical compliance for parallel arms. Fits; All 996 models inc GT3 & Turbo All 997 Models Inc GT3 & Turbo All Boxster 986 987 981 & 718 Models All Cayman 987 981 & 718 Models
    £329.99 inc VAT £274.99 ex VAT
  • RSR/ST Adjustable Torsion Bar Spring Plates 911 & 912 Short Wheelbase 1965-1968

    SKU:19665

    Out of Stock Out of Stock
    These High quality Galvanised Spring Plates replicate the classic Factory Race car Setup used on the IROC & LeMans/ IMSA cars of the era . Direct replacement Bolt On fit for All Short Wheel Base 911 / 912 models 1965 -1968 Only. Gives simple adjustment for ride height and Suspension setups. Sold as a Set (2) Note. Not for Later cars from 1969-1989. Please see other listing in this section.
    £659.99 inc VAT £549.99 ex VAT
  • RSR/ST Adjustable Torsion Bar Spring Plates 911 G50 1987-1989 & Turbo 1989 Only

    SKU:19663

    Out of Stock Out of Stock
    These High quality Galvanised Spring Plates replicate the classic Factory Race car Setup used on the IROC & LeMans/ IMSA cars of that era . Direct replacement Bolt On fit for Later G50 911's 1987-Onwards & 930 Turbo 1989 Only. Simple adjustment for ride height and Suspension setups. Sold as a Set (2) Note. For Earlier 911 912 & 930 Turbo Models Please see other listing in this section.
    £659.99 inc VAT £549.99 ex VAT
  • RSR/ST Adjustable Torsion Bar Spring Plates All 1969-1986 & 930 Turbo Upto-1988

    SKU:19662

    Out of Stock Out of Stock
    These High quality Galvanised Spring Plates replicate the classic Factory Race car Setup used on the IROC & LeMans/ IMSA cars of the era . Direct replacement Bolt On fit for All 911 / 912 & 930 Turbo models 1969-Onwards. Gives simple adjustment for ride height and Suspension setups. Sold as a Set (2) Note. Not for Later G50 Gearbox cars from 1987 -1989. Please see other listing in this section.
    £659.99 inc VAT £549.99 ex VAT
  • Spring Caps All Coil Over Applications & Billet Top Mounts & Bilstein B9 (pair)

    SKU:17128

    In Stock In Stock
    On applications using Adjustable Camber Plates Front & Rear. With spring ID of 62mm 2 1/4" using Spring Top Hats. Sold as a set of two. For all Spax & Bilstein B9 & B12 for 964 993 996 & 977 Turbo, GT3, RS. 924/944/968 M030. Boxster & Cayman R / GT4 etc
    £131.99 inc VAT £109.99 ex VAT
  • Stomski Racing Front Top Mounts Porsche 996 997 Boxster & Cayman 1997-2012 (x2)

    SKU:SR121

    In Stock In Stock
    Factory rubber Front shock mounts deflect under load and distort suspension settings, leading to poor tire wear, poor grip, poor handling, and slower laps times. STOMSKI RACING's Front Camber Plates ensure that your tyre investment is optimised, providing for the best grip, the best handling, and the fastest lap times. CNC machined from aircraft quality Billet Alloy and anodized for great looks and protection, Front Camber Plates deliver maximum range, the most precise tuning, the smoothest suspension travel, the easiest and the most accurate adjustment for your car. Include the finest quality aerospace monoballs as well as stainless steel hardware. Available with stainless steel bushings. Sold Per Pair Fits 986 / 987 Boxster, S, Cayman,S, 996 & 997 Carrera, S, Turbo & GT3
    £479.99 inc VAT £399.99 ex VAT
  • Stomski Racing Rear Control Arm & Rear Toe Arm Lock Out Plate Kit. All Models

    SKU:SR084

    In Stock In Stock
    These precision machined stainless steel RSR Spec plates provide a sure lock to eliminating unwanted camber changes caused by the factory eccentric moving under load. By bolting these plates to the chassis on the inboard end of the Rear control arm ( Coffin Arm ) or on the inboard end of the Rear Toe Arm ( Rear Toe ), the control arms will now be held in a constant, fixed position. Ideal when using RSR Spec adjustable Control arms. Fits all Models; 996, 997, Boxster, and Cayman 1997 to 2012
    £109.98 inc VAT £91.65 ex VAT
  • Stomski Racing Rear Strut Top Mounts All 996 & 997 Carrera Turbo & GT3 ( Pair)

    SKU:SR120

    In Stock In Stock
    Billet Rear Top Mounts. Stock rubber rear shock mounts can deflect under load and distort suspension settings, leading to poor tyre wear, poor grip, poor handling, and slower laps times. STOMSKI RACING's 996 / 997 Carrera Cup Style Rear Shock Monoball Top Mounts ensure that your settings are optimised, providing for the best grip, the best handling, and the fastest lap times. CNC machined from aircraft quality Billet aluminuim and anodized for great looks and protection, these Rear Shock Mounts deliver maximum range, the most precise tuning, the smoothest suspension travel, the easiest and the most accurate adjustment for your car. SR120 reconfigured geometry automatically allows for lowering of 16mm compared to factory & Cup Car mounts. Include the finest quality aerospace monoballs available, as well as stainless steel hardware. Comes with 12mm or 14mm stainless steel bushings. Can also be used with Bilstien & Other Coil over Suspension kits Also. (Pair)
    £395.99 inc VAT £329.99 ex VAT
  • Stomski Racing RSR Spec Rear Toe Control Arm Kit. All Models. 1997 to 2012

    SKU:SR082

    In Stock In Stock
    Precision alignment and Anti bump steer set up are critical for good handling, these RSR spec Rear Toe Control Arms are fabricated to exacting tolerances and standards, provide the premier upgrade for your track or street car. Using aerospace quality rod ends and components to provide for the most durable, accurate part available. With a left and right hand double adjuster the RSR toe link allows for extremely precise and infinite adjustment to fine tune suspension settings. Also included are seals to protect the monoballs in exposed environment. Sold p/pair Fits all Models; 996, 997, Boxster, and Cayman 1997 to 2012 (pair)
    £659.99 inc VAT £549.99 ex VAT
  • Stomski Racing Track Rod End Bump Steer Kit All 911 912 & 930 Turbo 1965 to 1989

    SKU:SR055

    Out of Stock Out of Stock
    Made from the highest quality aerospace Teflon lined Track rod ends and hardware, the Stomski Racing bump steer kit will allow for precise adjustment ranging from moderate street lowering to the most aggressive race setup. These kits allow for infinite fine tuning and come complete. No other hardware or parts needed. Includes seals. Fit all 911, 912, and 930 models through 1965 to 1989.
    £423.44 inc VAT £352.87 ex VAT
  • Uprated 21mm RSR/ST Front Torsion Bars All 911 & 912 & 930 Turbo 1965-1989

    SKU:19669

    Out of Stock Out of Stock
    +2mm Diameter Larger than Standard
    £439.98 inc VAT £366.65 ex VAT
  • Uprated 23mm RSR/ST Front Torsion Bars All 911 & 912 & 930 Turbo 1965-1989

    SKU:19670

    Out of Stock Out of Stock
    +4mm Diameter Larger than Standard
    £439.98 inc VAT £366.65 ex VAT
  • Uprated 26mm RSR/ST Rear Torsion Bars 911 & 912 1965-1986 & 930 Turbo Upto 1988

    SKU:19668

    Out of Stock Out of Stock
    Uprated Rear Torsion Bars for All None G50 Cars 1965 -Onwards
    £527.99 inc VAT £439.99 ex VAT
  • Uprated 28mm RSR/ST Rear Torsion Bars 911 & 912 1965-1986 & 930 Turbo Upto 1988

    SKU:19667

    Out of Stock Out of Stock
    Uprated Rear Torsion Bars for All None G50 Cars 1965 -Onwards
    £527.99 inc VAT £439.99 ex VAT
  • Uprated 30mm RSR/ST Rear Torsion Bars 911 & 912 1965-1986 & 930 Turbo Upto 1988

    SKU:19664

    Out of Stock Out of Stock
    Uprated Rear Torsion Bars for All None G50 Cars 1965 -Onwards
    £527.99 inc VAT £439.99 ex VAT
  • Uprated 30mm RSR/ST Rear Torsion Bars 911 G50 1987-1989 & 930 Turbo 1989 Only

    SKU:19666

    In Stock In Stock
    Uprated Rear Torsion Bars for All G50 Cars 1987-Onwards
    £527.99 inc VAT £439.99 ex VAT