Porsche 997 Gen 1 Chassis Upgrades & Strut Braces 2004 to 2009

OEM Stainless steel, easily installed, this high-precision system offers additional roll-over protection. Coupe Only

As you step up the power level on your Turbo, having proper cooling efficiency is mandatory to maximize your turbo performance. heavily benefit from the use of upgraded intercoolers. Developed these complete intercooler replacements, however some Modification to the plastic housing is required to fit these intercoolers. The cast end tanks are aluminum & then precision welded to the thick racing upgraded cores. The ends of the intercoolers are designed to work with factory boost hose fittings or silicone boost hose kit. The intercoolers retain the factory mounting positions and come in a polished finished. The intercoolers fit all Porsche 997 TT and GT2 Models Dimensions: Thickness: 80mm, Volume over standard intercooler: +40% Efficiency: +85%, Flow rate: 620 CFM ,Pressure Drop: less than 1% Use Up To 750+HP

The Agency Power Racing Suspension Package includes all the upgraded products you need to take your Porsche to the next level in handling. At this point, your car should already have some type of coil overs and sway bars installed. These components will be added to your current setup to improve handling functions geared toward the track enthusiast.

Safety is always the number one priority in any high horsepower or track vehicle. Agency Power has worked to develop the best fitting & functional roll bar available for the Porsche 996 997 Carrera, GT3, Turbo, and GT2 vehicles. Ultimate in protection & functional for those days where you needed the back seats. Unlike other roll bars we have seen, there is no drilling required. Direct fit using the factory seat belt mounting points, with seperate removable diagonal & harness bar. The harness bar is essential for those at the track running harnesses to keep them secured in the seat. The diagonal bar is added safety for roll over accidents & together they add rigidity to the chassis. Removable to provide full functionality of the rear seats. This roll bar height designed for easy installation & clearance on sunroof vehicles. Once installed, there is plenty of room to recline the seat or even move it backwards for the taller drivers.

Stainless steel GoPro Camera mount is three axis adjustable to properly position camera. Strap secures camera to mount. Attaches to Roll Cage harness guide bar tubing

These EuroCupGT-Pro Billet Plates add Strength to the factory Wing Panel & can be used with Standard or Motorsport Top Mounts. ( Sold as a Pair ) Fits All Models 1997 -2012

Ideal for track day and racing cars where secure easy access is required. Available as carbon look or plain black. These EuroCup catches fit all models 1965 - 2013. Price per pair

These EuroCupGT-Pro GT3 Billet Plates add Strength to the factory Wing Panel & can be used with Standard or Motorsport Top Mounts. ( Sold as a Pair ) Fits All Standard GT2 & GT3 / RS Models 1997 -2012 Also Any car using Porsche Stomski or EuroCupGT-Pro Top Mounts.

Also for Coupe cars with Bose sound system

The 996/997 harness mount bar has been tested and to handle the types of forces required by a Motor Vehicle Seat Belt Anchorages-Performance Requirements. The 996/997 harness mount bar properly locates and supports racing shoulder harnesses relative to the driver. In the case of an accident, it helps protect the driver's shoulders. The harness guides also prevent excessive shifting and fatigue of the driver during the high G loads of cornering and braking. The bars are easy to install and remove, use only existing holes and mounting points, and will not damage the car in any way. Strength requirements for harness mounts are considerably greater than those for harness guide bars since they must support the entire load applied to the belts. A mount really can't be relied on unless it has been tested to support the loads required. Material: Type 304, stainless steel Finish: Powder coated in durable black Models: 996/997 Coupe.

OEM Race part for all cars 1982 -Onwards Length; 75mm through bumper boss + strap (90mm long)

OEM Race part for all cars 1982 -Onwards Length; 40mm through bumper boss + strap (75mm Long )

Rear Light Weight & Polished Carbon & Alloy Strut Brace. Fits on Suspension Top Mounts inside cabin. For All Models 1997 -2012 inc all Carrera 2 / 4 / C4S GT3/RS Turbo & GTS Models

Carbon Fibre Front Center Gurney Strip. Direct replacement for the RS Spliiter Gurney, or Retro fit to All GT3 & Aero kit lower front spoiler. For 997 Generation-1 Models only 2005 to 2009 with Aero front bumper and 997 GT3 Front Bumper fitted. NOTE this will not fit Second Generation 997 models 2010-2012. Please check before ordering.

Bonnet Boot Engine Lid & Bumper Pin Hold Down Kit. 2x lightweight threaded Billet aluminum dome pins. 2x flush mount Delrin receiver discs. 2x locking pin clips and Nuts.

By using computer engineering and digital design STOMSKI RACING has developed the FIRST truly symmetrical 911 Semi-Solid Engine/Transmission Mount, thus allowing you to run stiffer mounts without sacrificing comfort or ride quality.  Our symmetrical design allows you to custom tune your ride- determining feel, function, and fun.  Because our SS mounts are SYMMETRICAL, you can now properly use them either as an engine mount OR inverted as a transmission mount on Boxster & Cayman models. Unlike other non-symmetrical SS mounts, there is no compromise when using SR135 inverted as a transmission mount because SR135 is symmetrical and thus FULLY supports and FULLY absorbs in BOTH positions/directions. Road tested and track proven, STOMSKI RACING's SR135 provides better shifting, better weight transfer, better handling, crisper throttle response, better acceleration, and of course GREAT looks, without any loss of comfort.  Mounting  comes complete with an  aluminium housing, stainless steel sleeve and disks spacers & a M12 Schnorr washer. Sold as 1 Pair (2x Mountings)