Due to business re-location, we are unable to take any orders until further notice. Please contact us via the Contact Us page with any queries regarding existing orders.
We are sorry for any inconvenience
Choose Currency

Porsche 997 Gen 1 Suspension Upgrades 2004 to 2009

Porsche 997 Gen 1 - Suspension Upgrades - 2004 to 2009

  • Adjustable Anti Roll Bar Drop Link Kit Front All 964 993 & 996/997 C4S Turbo GT3

    SKU:19451

    In Stock In Stock
    Ideal for All Standard, H&R and AP Anti Roll bars where added compliance is required on setup. Front for; 964 All 993 All 996 C4S Turbo GT2 & GT3 997 GT2 & GT3 Also use on Bilteine Coil Over Kits on All Carrera Models. Note. Please use Year & Model drop downs when checking out
    £131.99 inc VAT £109.99 ex VAT
  • Adjustable Anti Roll Bar Drop Link Kit Rear All Models 1978-Onwards ( Pair )

    SKU:19450

    In Stock In Stock
    Ideal for All Standard. H&R and AP Roll bars where added compliance is required on setup.
    £109.98 inc VAT £91.65 ex VAT
  • Agency Power Front Adjustable Anti Roll Bar links All 996 & 997 Carrera & Turbo

    SKU:AP996TT205

    Out of Stock Out of Stock
    Improving upon handling on any car is a must for achieving the best driving results. However, with a rear engine, rear wheel drive cars over & under steer poses a big problem. One of the first steps is upgrading the sway bar links to control this. Fits all Carrera & Turbo models 1998- 2012 996
    £439.99 inc VAT £366.66 ex VAT
  • Agency Power Full Handling kit 996 & 997 Carrera Turbo & GT3 Models 1998-2012

    SKU:AP996390

    In Stock In Stock
    The Agency Power Racing Suspension Package includes all the upgraded products you need to take your Porsche to the next level in handling. At this point, your car should already have some type of coil overs and sway bars installed. These components will be added to your current setup to improve handling functions geared toward the track enthusiast.
    £1,649.99
  • B12 Spring & Damper Kits 997 on With PASM

    SKU:KA5-B917

    Out of Stock Out of Stock
    Bilstein Sports dampers & Lowered Springs to provide excellent driving dynamics. Fine tuned to complement damper & spring rating. The kit lowers car by 30mm & is TUV approved. For all Models 2005 onwards with PASM
    £2,513.58 inc VAT £2,094.65 ex VAT
  • B12 Spring & Damper Kits 997 Without PASM

    SKU:SE5-B916

    Out of Stock Out of Stock
    Bilstein Sports dampers & Lowered Springs to provide excellent driving dynamics. Fine tuned to complement damper & spring rating. The kit lowers car by 30mm & is TUV approved. For all Models 2005 onwards without PASM
    £1,500.96 inc VAT £1,250.80 ex VAT
  • Elephant Racing Litronic Bracket Kit for GT3-R Type Control Arms

    SKU:ER2180009

    Out of Stock Out of Stock
    Litronic adapter to attach litronic sending unit to GT3-R type control arms. Order 1 kit per pair of GT3-R type control arms.
    £54.46 inc VAT £45.38 ex VAT
  • EuroCupGT Adjustable Rear Upper Control Arm Kit 996 / 997 Carrera, GT3 & Turbo

    SKU:7370

    Out of Stock Out of Stock
    Set of 4 Heave duty adjustable rear upper control arms. Ideal for Camber set ups and clearance, when using larger wheel & tyre sizes where Geometry is limited with standard control arms. All models 1998-2012
    £439.98 inc VAT £366.65 ex VAT
  • EuroCupGT Adjustable Tension Control Arms 996 Fr & Re / 986 Front & 997 Rear

    SKU:EURO6435

    In Stock In Stock
    EuroCupGT uprated suspension tension bars replace the cast aluminium arms & allow for neutral adjustment when setting up your cars geometry. The rubber bushing is replaced with a Rose Joint to allow for more accurate handling. Fits the following: All 996 Models inc GT3 & Turbo Front & Rear All Boxster 986 Front Only All 997 Models inc GT3 & Turbo Rear Only
    £329.99 inc VAT £274.99 ex VAT
  • EuroCupGT Billet Front Chassis Strength Plates Porsche 996 997 Boxster Cayman

    SKU:18934

    In Stock In Stock
    These EuroCupGT-Pro Billet Plates add Strength to the factory Wing Panel & can be used with Standard or Motorsport Top Mounts. ( Sold as a Pair ) Fits All Models 1997 -2012
    £65.99 inc VAT £54.99 ex VAT
  • EuroCupGT Front Tension Rods 997 Carrera Turbo / 987 Boster & Cayman 2005-2012

    SKU:7796

    Out of Stock Out of Stock
    EuroCupGT uprated Front suspension tension bars replace the cast aluminium arms & allow for neutral adjustment when setting up your cars geometry. The rubber bushing is replaced with a Rose Joint to allow for more accurate handling. Fits the following: Boxster 987 Front Only Cayman 987 Front Only All 997 Models inc GT3 & Turbo Front Only
    £324.49 inc VAT £270.41 ex VAT
  • EuroCupGT Spring & Damper Coil Over Kit 997 C2/4 C2S/4S & Turbo Models 2005-2012

    SKU:19574

    In Stock In Stock
    EuroCupGT Super Sport damper design helps eliminate discomfort resulted from bump steer on rough roads. Sports dampers enables you to adjust the ride height with a 30-way damping adjustment. Fully Top Adjustable All Round, comes with Alloy Top Mounts all round and Front Camber Adjustment Plates. Ideal for All Fast Road & Track cars For all 2 wheel drive Models
    £1,319.99 inc VAT £1,099.99 ex VAT
  • EuroCupGT-Pro Bilstein Coil-Over Spring Seat & Locking Ring 2 1/2" 63mm (1)

    SKU:18940

    Out of Stock Out of Stock
    2 1/2-INCH (63MM) LOWER SPRING SEAT PLATFORM or LOCKING RING. For Bilstein & EuroCupGT-Pro Coil Over Kits. Manufactured from HE30 Aluminium, for use supporting the spring coil over. These are one of the most popular parts in our suspension range, this adapter is lightweight and has been developed specially for maximum strength and control. Sold Each (1)
    £26.39 inc VAT £21.99 ex VAT
  • EuroCupGT-Pro C Spanner for 2 1/2" 63mm for Porsche Bilstein Suspension Rings

    SKU:18947

    In Stock In Stock
    2 1/2-INCH (63MM) PRECISION C SPANNER FOR All Porsche Bilstein Koni & EuroCupGT Suspension. The Pro C spanner is for the ease of adjusting on the ride height of your Porsche without damaging the aluminium platforms and locking rings. This is a drop forged professional spanner.
    £22.00 inc VAT £18.33 ex VAT
  • EuroCupGT-Pro C Spanner for 2 1/4" 57mm for Porsche & Bilstein Suspension Rings

    SKU:18948

    In Stock In Stock
    2 1/4-INCH (57MM) PRECISION C SPANNER FOR All Porsche Bilstein Koni & EuroCupGT Suspension. The Pro C spanner is for the ease of adjusting on the ride height of your Porsche without damaging the aluminium platforms and locking rings. This is a drop forged professional spanner.
    £19.79 inc VAT £16.49 ex VAT
  • EuroCupGT-Pro Coil-Over Assister Spring Seat Retainer Ring 2 1/2" 63mm (1)

    SKU:18943

    In Stock In Stock
    2 1/2-INCH (63MM) HELPER SPRING PLATFORM. The 2 1/2" Double Helper Adaptor manufactured from HE30 Aluminium, for use when fitting helper spring. These are part of the EuroCupGT-Pro suspension range, but can be used on all 2 1/2" 63mm Spring Setups inc Bilstein & Koni etc. This adapter is lightweight and has been developed specially for maximum strength and control. ( Sold Each )
    £39.59 inc VAT £32.99 ex VAT
  • EuroCupGT-Pro Coil-Over Assister Spring Seat Retainer Ring 2 1/4" 57mm (1)

    SKU:18942

    In Stock In Stock
    2 1/4-INCH (57MM) HELPER SPRING PLATFORM. The 2 1/4" Double Helper Adaptor manufactured from HE30 Aluminium, for use when fitting helper spring. These are part of the EuroCupGT-Pro suspension range, but can be used on all 2 1/4" 57mm Spring Setups inc Bilstein & Koni etc. This adapter is lightweight and has been developed specially for maximum strength and control. ( Sold Each )
    £39.59 inc VAT £32.99 ex VAT
  • EuroCupGT-Pro Front Coil Over Universal Conversion Kit All Models (One Axle Pair

    SKU:18936

    Out of Stock Out of Stock
    Designed to fit over your standard Front Damper Cases, this kit allows the use of 2 1/2" (63mm ID) Motorsport Springs. These Spring Conversion kits are ideal for Bilstein & Koni applications. Manufactured from HE30 Aluminium, this spring conversion kit gives you the option to adjust the ride height & corner Weights of your Porsche very effectively. These are lightweight and have been developed specially for maximum strength and control. Note. On most models you will need to have the Standard spring seats removed to allow for clearance over the damper tube. Can Be used on Front or Rear Applications as required.
    £164.99 inc VAT £137.49 ex VAT
  • EuroCupGT-Pro Front GT3 Type Coil-Over Spring Top Hats 2 1/2" 63mm All Models (2

    SKU:18938

    In Stock In Stock
    These 2 1/2-INCH (63MM) Top Spring Retainers come with a a 10mm pilot hole which can be drilled if needed to 12mm or 14mm or as required. Ideal for Bilstein & Koni or GT3 applications. Manufactured from HE30 Aluminium, for use supporting spring coil-over. These are one of the popular parts in our suspension range, thes retainers are lightweight and have been developed specially for maximum strength and control.
    £65.99 inc VAT £54.99 ex VAT
  • EuroCupGT-Pro GT3 Adjustable Front Top Mounts Porsche 996 997 Boxster & Cayman

    SKU:18933

    In Stock In Stock
    EuroCupGT-Pro GT3 & GT3RS Adjustable Camber Front Top mountings, these Billet Front mounts are Ideal for Fast Road, Track Day & Race & Rally cars. Can be fitted with Standard or Coil-Over Suspension Kits. ( Sold as a Pair ) Note. Bilstien B9 & Other aftermarket Coil Over kits do not come with any Top Mounts.
    £395.99 inc VAT £329.99 ex VAT
  • EuroCupGT-Pro Motorsoprt Adjustable Fork Arms All 997 Rear & GT3 / RS Front

    SKU:18931

    Out of Stock Out of Stock
    Race Proven, these adjustable Fork Arms are modeled on the Porsche Motorsport RSR fitment. ( sold as a Pair ) 997 Carrera C2S C4S GTS Turbo & GT3/RS Rear On; All 997 Models Front Only On; 997 GT2 GT3 & GT3 Cup
    £329.99 inc VAT £274.99 ex VAT
  • EuroCupGT-Pro Rear Coil Over Universal Conversion Kit All Models (One Axle Pair)

    SKU:18937

    Out of Stock Out of Stock
    Designed to fit over your standard Rear Damper Cases, this kit allows the use of 2 1/4" (57mm ID) Motorsport Springs. These Spring Conversion kits are ideal for Bilstein & Koni applications. Manufactured from HE30 Aluminium, this spring conversion kit gives you the option to adjust the ride height & corner Weights of your Porsche very effectively. These are lightweight and have been developed specially for maximum strength and control. Note. On most models you will need to have the Standard spring seats removed to allow for clearance over the damper tube. Can Be used on Front or Rear Applications as required.
    £171.59 inc VAT £142.99 ex VAT
  • EuroCupGT-Pro Rear GT3 Type Coil-Over Spring Top Hats 2 1/4" 57mm All Models (2)

    SKU:18939

    In Stock In Stock
    These 2 1/4-INCH (57MM) Top Spring Retainers come with a a 10mm pilot hole which can be drilled if needed to 12mm or 14mm or as required. Ideal for Bilstein & Koni or GT3 applications. Manufactured from HE30 Aluminium, for use supporting spring coil-over. These are one of the popular parts in our suspension range, thes retainers are lightweight and have been developed specially for maximum strength and control.
    £65.99 inc VAT £54.99 ex VAT
  • EuroCupGT-Pro Rear Motorsport Monoball Top Mounts All 996 & 997 Models 1997-2012

    SKU:18944

    Out of Stock Out of Stock
    Similar to the GT3 Cup & RSR Race mountings, these Billet Rear mounts are Ideal for Fast Road, Track & Race cars. Can be fitted with Standard or Coil-Over Kits. Note. Bilstien B9 & Other aftermarket Coil Over kits do not come with Top Mounts.
    £329.99 inc VAT £274.99 ex VAT
  • EuroCupGT-Pro Rear Type Coil-Over Spring Seat & Locking Ring 2 1/4" 57mm (1)

    SKU:18941

    Out of Stock Out of Stock
    2 1/4-INCH (57MM) LOWER SPRING SEAT PLATFORM or LOCKING RING. For EuroCupGT-Pro Coil Over Kits. Manufactured from HE30 Aluminium, for use supporting the spring coil over. These are one of the most popular parts in our suspension range, this adapter is lightweight and has been developed specially for maximum strength and control. Sold Each (1)
    £26.39 inc VAT £21.99 ex VAT
  • EuroCupGTBillet Front Chassis Strength Plates Porsche 996 997 Boxster & Cayman

    SKU:18935

    In Stock In Stock
    These EuroCupGT-Pro GT3 Billet Plates add Strength to the factory Wing Panel & can be used with Standard or Motorsport Top Mounts. ( Sold as a Pair ) Fits All Standard GT2 & GT3 / RS Models 1997 -2012 Also Any car using Porsche Stomski or EuroCupGT-Pro Top Mounts.
    £65.99 inc VAT £54.99 ex VAT
  • Front Anti Roll Bar Bush for 997 Turbo GT3 & X51 Carrera 2005-2012

    SKU:997.343.792.00

    In Stock In Stock
    £16.49 inc VAT £13.74 ex VAT
  • Front Fork Arm Subframe to Wishbone Porsche 996 Carrera Turbo GT3 Boxster 997GT3

    SKU:5853

    In Stock In Stock
    OEM Front Fork Arm All Models 1997-2004. Also Used on 997 GT3 GT3RS & GT2. And With GT3 Coffin Arms on later Carrera Boxster & Cayman 987 Models
    £109.98 inc VAT £91.65 ex VAT
  • Front Suspension Damper Top Nut For All GT2 & GT3 Top Mounts with Ball Joint

    SKU:18402

    In Stock In Stock
    £19.79 inc VAT £16.49 ex VAT
  • Front Suspension Top Spacer between Top Mount & Spring Cap All GT2 & GT3 / RS

    SKU:18403

    In Stock In Stock
    OEM Bush for Pillow Ball Top Mount under mounting. Can be used on Aftermarket Applications & GT3 Cup Cars
    £19.79 inc VAT £16.49 ex VAT
  • Front Top Mount 997 C4 / C4S & 997 Turbo LEFT 2005-2012

    SKU:11357

    In Stock In Stock
    OEM Top Mount for all 4 wheel drive cars only. Handed
    £131.99 inc VAT £109.99 ex VAT
  • Front Top Mount 997 C4 / C4S & 997 Turbo RIGHT 2005-2012

    SKU:11358

    In Stock In Stock
    OEM Top Mount for 4 wheel drive cars only. Handed
    £131.99 inc VAT £109.99 ex VAT
  • GT3 Adjustable Front Anti Roll Bar Porsche 997 C2 C4 Turbo Boxster Cayman 2005-

    SKU:997GT3BAR

    Out of Stock Out of Stock
    OEM, fully adjustable with four positions available, & optimum performance, the factory GT3 swaybar is light weight hollow 26.8mm OD sway bars are half the weight of a solid bar with the same stiffness. Fits Boxster Cayman & All 997 models. (Includes Bushes)
    £412.49 inc VAT £343.74 ex VAT
  • GT3 CUP / RSR ADJUSTABLE CASTOR THRUST BUSH FOR COFFIN ARM

    SKU:SR087

    In Stock In Stock
    Whether doing a complete suspension upgrade, eliminating the overly-compliant rubber thrust arm bushings that lead to unpredictable camber changes, or searching for more range of adjustment for your suspension, STOMSKI RACING's Adjustable Thrust Arm Bushings are the answer to your needs.  Installing these high quality 6061 aluminum anodized bushings will provide better feedback and handling without leading to unwanted road noise on either your dedicated track car or daily driver.  By upgrading to STOMSKI RACING's Adjustable Thrust Arm Bushings for all four control arms on your car, unwanted suspension changes caused by the standard flexible bushings will be a thing of the past, and thus your lap times will improve as your handling increases.  Fits; Front All 996 / 986 Boxster. Rear; All 996 / 997 Carrera / GT3 / Turbo / GT2, 986 / 987 Boxster, and Cayman.  Sold as One set for 1 wishbone. ( 2 kits needed per axle )
    £104.41 inc VAT £87.01 ex VAT
  • GT3 Cup FIXED COFFIN ARM BUSHING 996 997 Carrera Turbo 986 987 Boxster & Cayman

    SKU:SR088

    In Stock In Stock
    Not all suspension upgrades will require an adjustable castor / camer arm bushing like the SR087, thus the STOMSKI RACING's Fixed Thrust Arm Bushings provide the perfect solution for your application a standard Geometry setting is all that is required to prevent unpredictable camber changes.  Installing these high quality 6061 aluminum anodized bushings will provide better feedback and handling without leading to unwanted road noise on either your dedicated track car or daily driver.  By upgrading to STOMSKI RACING's Fixed Thrust Arm Bushings for all four control arms on your car, unwanted suspension changes caused by the stock flexible bushings will be a thing of the past, and thus your lap times will improve as your handling increases.  Fits; Front; All 996 & 986 Boxster. Rear; All 996 / 997 Carrera / GT3 / Turbo / GT2, 986 / 987 Boxster, and Cayman.  Sold as One set for 1 wishbone. ( 2 kits needed per axle ).
    £131.99 inc VAT £109.99 ex VAT
  • GT3 Split Wishbone Ball Joint Front & Rear 1999-2012 GT3RS Cup & RSR

    SKU:1986

    Out of Stock Out of Stock
    OEM Wishbone Coffin Arm Front & Rear Applications. For All GT2 / GT3 RS. Also Motorsport Applications; on Boxster 996 & 997. Note. Handed so please denote Left or Right on ordering.
    £549.99
  • GT3 Wishbone complete OEM Fits All Models 1997-2012 Sold Each (1)

    SKU:18809

    In Stock In Stock
    OEM Adjustable Wishbone Coffin Arm Complete. Price is for one (1) complete Arm.
    £769.99
  • H&R Anti Roll (Sway) Bars Front & Rear 997 C2 & C2S / GTS 2005-2012

    SKU:5534

    In Stock In Stock
    Front 24mm & Rear 24mm diameter, Reduces Body Roll, Increases lateral stiffness, Improves handling. An exact fit & incomparable performance in every application. Heat-treated & shot-peened for increased hardness & life, Powder coated. Comes with Teflon composite bushings. For All Manual Models ,
    £549.97 inc VAT £458.31 ex VAT
  • H&R Anti Roll (Sway) Bars Front & Rear 997 C4 C4S & Turbo 2005-2012

    SKU:5536

    Out of Stock Out of Stock
    Front 26mm & Rear 24mm diameter, Reduces Body Roll, Increases lateral stiffness, Improves handling. An exact fit & incomparable performance in every application. Heat-treated & shot-peened for increased hardness & life, Powder coated. Comes with Teflon composite bushings. For All 4 wheel drive Models ,
    £659.99 inc VAT £549.99 ex VAT
  • H&R Lowering Spring kit 997 C4 /C4S & GTS 2005-2012

    SKU:4025

    In Stock In Stock
    Lowers car by 25mm Set of 4. For 997 Carrera 4 / 4S & GTS
    £395.99 inc VAT £329.99 ex VAT
  • H&R Lowering Spring Kit 997 Turbo 20-25mm 2005-2012

    SKU:1440

    In Stock In Stock
    Lowers car by 20 -25mm Set of 4. For 997 Turbo 2005 -On
    £467.50 inc VAT £389.58 ex VAT
  • H&R Lowering Spring Kit All Carrera 2 & C2S 2005-2012

    SKU:2356

    Out of Stock Out of Stock
    High quality Smooth & progressive. For All 2 wheel drive Carrera models. -25mm
    £384.97 inc VAT £320.81 ex VAT
  • H&R Lowering Spring Kit Carrera 2 / C2S & Cabriolet (15mm ) 1998-2012

    SKU:5003CAB

    Out of Stock Out of Stock
    High Quality Smooth & progressive ( set of 4). Lowers car by 15mm. Note Only for rear wheel drive cars ( Not C4 or C4S )
    £384.97 inc VAT £320.81 ex VAT
  • Lower Wishbone Control Arm Adjusting Shim 10mm GT3 / RS Coffin Arm 1997-On

    SKU:996.341.543.95

    In Stock In Stock
    £43.99
  • Lower Wishbone Control Arm Adjusting Shim 1mm GT3 / RS Coffin Arm 1997-On

    SKU:996.341.543.90

    In Stock In Stock
    £10.99
  • Lower Wishbone Control Arm Adjusting Shim 2mm GT3 / RS Coffin Arm 1997-On

    SKU:996.341.543.33

    In Stock In Stock
    £16.49
  • Lower Wishbone Control Arm Adjusting Shim 3mm GT3 / RS Coffin Arm 1997-On

    SKU:996.341.543.92

    In Stock In Stock
    £27.49
  • Lower Wishbone Control Arm Adjusting Shim 5mm GT3 / RS Coffin Arm 1997-On

    SKU:996.341.543.99

    In Stock In Stock
    £32.99
  • Lower Wishbone Control Arm Adjusting Shim 7mm GT3 / RS Coffin Arm 1997-On

    SKU:996.341.543.93

    In Stock In Stock
    £65.99
  • Lowering Spring Kit 996 C2 / 997 C2 / C2S 1998-2012 (set of 4)

    SKU:7502

    Out of Stock Out of Stock
    Set of 4 lowering springs for 996/997 C2 & C2S Models 1998 to 2012. SPAX spring kits are progressively wound. This offers a softer ride at low speeds & a stiffer ride at high speeds, when you need it most. (Also fits Early 996 C4 1998 -2000 Models)
    £285.98 inc VAT £238.32 ex VAT
  • Lowering Spring Kit 997 C2 / C2S 25-30mm

    SKU:1472

    Out of Stock Out of Stock
    Lowers car by 30mm Set of 4. For Standard 997 Carrera
    £401.45 inc VAT £334.54 ex VAT
  • Lowering Spring Kit 997 C4

    SKU:1951

    Out of Stock Out of Stock
    Lowers car by 30mm Set of 4. For 997 Carrera 4
    £401.45 inc VAT £334.54 ex VAT
  • Lowering Springs H & R 997 C2 / C2S Aprox 15mm lower ( All inc PASM )

    SKU:11809

    In Stock In Stock
    £384.97 inc VAT £320.81 ex VAT
  • Porsche 996 & 997 Rear Carbon Fiber Strut Brace Carrera 2 4 S Turbo 911 GT3 RS

    SKU:11406

    In Stock In Stock
    Rear Light Weight & Polished Carbon & Alloy Strut Brace. Fits on Suspension Top Mounts inside cabin. For All Models 1997 -2012 inc all Carrera 2 / 4 / C4S GT3/RS Turbo & GTS Models
    £164.99
  • PSS10 Spring & Damper Kits 997 Carrera C4 & C4S (& Turbo Comfort ) Without PASM

    SKU:GM5-D588

    Out of Stock Out of Stock
    Ride height adjustable coil-over system with 9 different damping force settings.The damper settings are easily changed by turning the adjuster to fine tune for your driving style. The kit lowers by 30-60mm & is TUV approved. For C4 & C4S Models without PASM
    £2,872.67 inc VAT £2,393.89 ex VAT
  • PSS9 Spring & Damper Kits 997 Carrera 2 & 2S Without PASM

    SKU:GM5-B557

    Out of Stock Out of Stock
    Ride height adjustable coil-over system with 9 different damping force settings.The damper settings are easily changed by turning the adjuster to fine tune for your driving style. The kit lowers by 30-60mm & is TUV approved. For C2 & C2S Models without PASM
    £2,721.84 inc VAT £2,268.20 ex VAT
  • Rear Adjustable Anti Roll Bar Drop Links All 997 Carrera Turbo & GT3 2005-2012

    SKU:APRX8205

    In Stock In Stock
    997/S / 997TT, GT2/3 & RS Rear adjustable Anti Roll bar drop links 2005-2012 ( Also fits All 996 models 98-2004 ) Per Pair (2) To complete suspension upgrades, these sway bar links to go hand and hand with the solid AP Anti Roll bars or Oem bars along with the AP rear control arm kit. Roll bar links offer you adjustability for setting up the suspension, these will enable you to properly corner weight your car for optimal handling. The 6061 CNC machined centres have flats cut in place for easy access for adjustments, one of the most over looked parts of suspension is the spherical rod ends. Agency Powers spherical rod ends are designed in stainless steel and have a Teflon liner sold in pairs for all 997 2004-2012 cars ( Also fits 996 models )
    £263.99 inc VAT £219.99 ex VAT
  • Rear Adjustable Toe Link Kit Porsche 996 997 & 986 987 981 Boxster & Cayman

    SKU:7632

    In Stock In Stock
    EuroCupGT rear adjustable toe links arms adjusts camber & dials in the toe for the rear. These adjustable toe links are design to give you a more responsive rear end along with the ability to dial in the toe on the rear end more precisely. These do both Toe and vertical compliance for parallel arms. Fits; All 996 models inc GT3 & Turbo All 997 Models Inc GT3 & Turbo All Boxster 986 987 981 & 718 Models All Cayman 987 981 & 718 Models
    £329.99 inc VAT £274.99 ex VAT
  • Rear Subframe Bush All 996 & 997 Carrera Turbo & GT3 Models 1998-2012

    SKU:4320

    In Stock In Stock
    Priced each 1, ( 4 per car per side ). For All Carrera, Turbo & GT3 models 1997 to 2012 Easy fit, Ideal for fast road / Track & motorsports applications. Improves rear compliance in all conditions
    £32.99 inc VAT £27.49 ex VAT
  • Rear Toe Link Bolts All Models 1997-2012

    SKU:997.331.217.02

    In Stock In Stock
    For Rear Suspension Toe / Track Arm. All Models inc Turbo & GT3
    £16.49 inc VAT £13.74 ex VAT
  • Rear Track Control Arm Toe Link Poly Bush Kit (2) All Models 1997-2012

    SKU:18797

    Out of Stock Out of Stock
    Complete kit for both sides. Improves set ups no end.
    £65.99 inc VAT £54.99 ex VAT
  • Spring Caps All Coil Over Applications & Billet Top Mounts & Bilstein B9 (pair)

    SKU:17128

    In Stock In Stock
    On applications using Adjustable Camber Plates Front & Rear. With spring ID of 62mm 2 1/4" using Spring Top Hats. Sold as a set of two. For all Spax & Bilstein B9 & B12 for 964 993 996 & 977 Turbo, GT3, RS. 924/944/968 M030. Boxster & Cayman R / GT4 etc
    £131.99 inc VAT £109.99 ex VAT
  • Stomski Racing Front Top Mounts Porsche 996 997 Boxster & Cayman 1997-2012 (x2)

    SKU:SR121

    In Stock In Stock
    Factory rubber Front shock mounts deflect under load and distort suspension settings, leading to poor tire wear, poor grip, poor handling, and slower laps times. STOMSKI RACING's Front Camber Plates ensure that your tyre investment is optimised, providing for the best grip, the best handling, and the fastest lap times. CNC machined from aircraft quality Billet Alloy and anodized for great looks and protection, Front Camber Plates deliver maximum range, the most precise tuning, the smoothest suspension travel, the easiest and the most accurate adjustment for your car. Include the finest quality aerospace monoballs as well as stainless steel hardware. Available with stainless steel bushings. Sold Per Pair Fits 986 / 987 Boxster, S, Cayman,S, 996 & 997 Carrera, S, Turbo & GT3
    £479.99 inc VAT £399.99 ex VAT
  • Stomski Racing Rear Control Arm & Rear Toe Arm Lock Out Plate Kit. All Models

    SKU:SR084

    In Stock In Stock
    These precision machined stainless steel RSR Spec plates provide a sure lock to eliminating unwanted camber changes caused by the factory eccentric moving under load. By bolting these plates to the chassis on the inboard end of the Rear control arm ( Coffin Arm ) or on the inboard end of the Rear Toe Arm ( Rear Toe ), the control arms will now be held in a constant, fixed position. Ideal when using RSR Spec adjustable Control arms. Fits all Models; 996, 997, Boxster, and Cayman 1997 to 2012
    £109.98 inc VAT £91.65 ex VAT
  • Stomski Racing Rear Strut Top Mounts All 996 & 997 Carrera Turbo & GT3 ( Pair)

    SKU:SR120

    In Stock In Stock
    Billet Rear Top Mounts. Stock rubber rear shock mounts can deflect under load and distort suspension settings, leading to poor tyre wear, poor grip, poor handling, and slower laps times. STOMSKI RACING's 996 / 997 Carrera Cup Style Rear Shock Monoball Top Mounts ensure that your settings are optimised, providing for the best grip, the best handling, and the fastest lap times. CNC machined from aircraft quality Billet aluminuim and anodized for great looks and protection, these Rear Shock Mounts deliver maximum range, the most precise tuning, the smoothest suspension travel, the easiest and the most accurate adjustment for your car. SR120 reconfigured geometry automatically allows for lowering of 16mm compared to factory & Cup Car mounts. Include the finest quality aerospace monoballs available, as well as stainless steel hardware. Comes with 12mm or 14mm stainless steel bushings. Can also be used with Bilstien & Other Coil over Suspension kits Also. (Pair)
    £395.99 inc VAT £329.99 ex VAT
  • Stomski Racing RSR Spec Rear Toe Control Arm Kit. All Models. 1997 to 2012

    SKU:SR082

    In Stock In Stock
    Precision alignment and Anti bump steer set up are critical for good handling, these RSR spec Rear Toe Control Arms are fabricated to exacting tolerances and standards, provide the premier upgrade for your track or street car. Using aerospace quality rod ends and components to provide for the most durable, accurate part available. With a left and right hand double adjuster the RSR toe link allows for extremely precise and infinite adjustment to fine tune suspension settings. Also included are seals to protect the monoballs in exposed environment. Sold p/pair Fits all Models; 996, 997, Boxster, and Cayman 1997 to 2012 (pair)
    £659.99 inc VAT £549.99 ex VAT
  • Wishbone Bush Inner Front & Rear All Porsche Boxster Cayman 996 & 997 1997-2012

    SKU:4314

    Out of Stock Out of Stock
    Priced each , Two pairs per Axle. For All Models Front & Rear 1997 to 2012
    £32.99 inc VAT £27.49 ex VAT