Due to business re-location, we are unable to take any orders until further notice. Please contact us via the Contact Us page with any queries regarding existing orders.
We are sorry for any inconvenience
Choose Currency

Porsche 997 Gen 2 Performance Exhausts 2010 to 2012

Porsche 997 Gen 2 - Performance Exhausts - 2010 to 2012

  • 996 & 997 GT3 & GT3RS Exhaust Gasket set 1999-2012

    SKU:ECGT-6664

    In Stock In Stock
    911 GT3 Exhaust Gasket set, ideal when replacing your System or replacing the Cats. Fits all cars 1999 to 2012
    £55.00 inc VAT £45.83 ex VAT
  • 996 & 997 GT3 / GT3RS Full Exhaust fitting Kit ( Inc Clamps ) 1999-2012

    SKU:ECGT-6668

    In Stock In Stock
    EuroCupGT / Porsche 911 GT3 ( 3.6, 3.8L ) A2 grade Stainless Exhaust Nuts, Bolts & Gaskets. Also includes cat pipe sleeves & Stainless Tail pipe Clamps, ideal when replacing or repairing your old System. Fits most cars 1999 to 2012
    £98.94 inc VAT £82.45 ex VAT
  • 996 & 997 Turbo & 911 GT2 Exhaust Gasket Set 1999-2012

    SKU:ECGT-6663

    In Stock In Stock
    911 Turbo Full Exhaust Gasket set, ideal when replacing your System or repairing the Turbo's Fits all cars 2000 to 2012
    £65.94 inc VAT £54.95 ex VAT
  • 996 & 997 Turbo / GT2 & GT3 / RS stainless Steel Exhaust fitting Kit 1999-2012

    SKU:ECGT-6661

    In Stock In Stock
    EuroCupGT 911 Full A2 grade Stainless Exhaust Nut & Bolt kit, includes 12x Manifold to Head Shoulder bolts, 6x Manifold to at / Turbo bolts & 8x shoulder nuts. ideal when replacing your System or repairing the Turbo's
    £32.99
  • 997 Turbo Flange to Cat Pipe / Rear Silencer Gasket Large square 2005-2012

    SKU:997.111.217.70

    In Stock In Stock
    OEM Stainless Steel Gasket
    £12.08 inc VAT £10.07 ex VAT
  • Agency Power High Flow Cat-Back Exhaust System All 997 Carrera Gen-2 2009-2012

    SKU:AP9972170

    Out of Stock Out of Stock
    Agency Powers exhaust system for All 997 Carrera Gen-2 Models features high quality and tuned rear boxes in addition to the high flow cross pipe in the kit. The exhaust has been tuned to produce an incredible race tone without a lot of drone found in similar designs. The exhaust fits with the Agency Power dual exhaust tips or stock tips as pictured. Since the car retains the primary catalytic converters, there are no check engine light or emissions issues. Nice Crisp Sound The entire exhaust is 304 stainless steel and polished to a show finish. It uses the OEM mounting points and hardware.
    £2,200.00 inc VAT £1,833.33 ex VAT
  • Blow Off Valves to Air 997 Turbo & GT2 (3 Tuning Boost Springs) Pair 2005-2012

    SKU:11514

    In Stock In Stock
    ston Diverter bypass valves 50/50 to air ( BOV  Pop Off Valve )  Direct replacement for the original fitment in rear of Turbo Housings. Clears factory wheel arch housings so no cutting needed!  Easy DIY Fit. Note; These type give a "pop off" valve sound!! Kit Includes: 2 x Valves 2x Uprated Yellow, Blue & Red springs.
    £263.99 inc VAT £219.99 ex VAT
  • Bolt Catalytic Converter to Manifold ( set of 3 )

    SKU:900.074.287.02

    In Stock In Stock
    Set of 3 Stainless Manilfold to Cat Bolts. There are three per side and Six in total
    £5.49
  • Carrera 997 Gen-2 Exhaust silencer Sleeve Clamps x2 set 2009-2012

    SKU:00962

    In Stock In Stock
    Rear Silencer Sleeve Clamp Set for All 997 Gen 2 Carrera models. Pair (2)
    £23.99 inc VAT £19.99 ex VAT
  • EuroCupGT 997 Carrera 2/4 & 2S/4S Large Stainless Tailpipes 2005-2012

    SKU:7282

    In Stock In Stock
    EuroCupGT Large Stainless Steel Polished tailpipes will fit all models with standard exhaust system both Carrera 2/4 & Carrera 2S & 4S models. Note; Not for cars with OE sports switchable system. Also Ideal for standard Carrera cars with the EuroCupGT sports rear boxes (also listed in this section).
    £299.99 inc VAT £249.99 ex VAT
  • EuroCupGT 997 Turbo GT2 Look Twin Round Tailpipes 2005-2012

    SKU:7480

    In Stock In Stock
    EuroCupGT Twin Turbo Shot Gun twin round tailpipes. Will fit all 997 Turbo models.
    £220.00 inc VAT £183.33 ex VAT
  • EuroCupGT Large Stainless Steel GT3 / GT3RS Tailpipe Bolt On 2005-2012

    SKU:8139

    In Stock In Stock
    EuroCupGT stainless steel tailpipe for original exhaust. Twin outlet , simple bolt on. Will fit all GT3 & GT3RS 3.6L 3.8L & 4.0L
    £164.99 inc VAT £137.49 ex VAT
  • EuroCupGT Porsche 997 Turbo Billet Alloy Turbo Recirculation Dump valves ( PAIR

    SKU:ECGT-4516

    In Stock In Stock
    The piston design recirculation ( dump ) valves are a direct replacement for the original fitment. These valves give greater longevity & come with 2 spring ratings; 1Bar and 1.2 Bar. These will be required before a re map is performed to support the boost pressure required. easy 3 bolt installation with screw top for spring interchangability.
    £220.00 inc VAT £183.33 ex VAT
  • EuroCupGT Sports Tailpipes Black Finish for All 997 Carrera 2/4 & 2S/4S 2005-On

    SKU:8042

    In Stock In Stock
    EuroCupGT sports tailpipes for All Carrera 2/4 & Carrera S / 4S models, turbo style black stainless steel finish.
    £164.99 inc VAT £137.49 ex VAT
  • EuroCupGt Stainless Manifold to Head Bolt Set Porsche Carrera Boxster Cayman x12

    SKU:ECGT118

    In Stock In Stock
    These studs are shouldered & are designed to replace your existing corroded cylinder head to exhaust manifold bolts. Sold in packs of 12 ( one car set ) Fits all models 1997 to 2011
    £16.49 inc VAT £13.74 ex VAT
  • EuroCupGT Stainless Steel Twin Tailpipes Porsche 997 Carrera 2/4 & 2S/4S

    SKU:8041

    In Stock In Stock
    Sports tailpipes for All Carrera 3.6L & Carrera S 3.8L models giving a unique Turbo styling to your rear bumper. 304 stainless steel in Polished silver finish. 2005-2012. Note. Not for cars fitted with the factory Switchable System.
    £164.99 inc VAT £137.49 ex VAT
  • EuroCupGT Titanium Tailpipe for Porsche 997 GT3 & RS aprox 650g 911 2005-2013

    SKU:8140

    In Stock In Stock
    EuroCupGT Titanium twin tailpipe for all 997 GT3 & GT3RS exhausts. Feather weight twin outlet aprox 650g in weight Simple bolt-on bolt-off option which saves 1.25Kg from the rear of the car. Will fit all GT3 & GT3RS models 2005 to 2012
    £209.99 inc VAT £174.99 ex VAT
  • Exhaust Manifold Gasket All models 2009-Onwards ( Not Handed )

    SKU:8078

    In Stock In Stock
    For All Models 2009 onwards, except GT2 & GT3
    £19.79 inc VAT £16.49 ex VAT
  • Exhaust Manifold Gasket OE for All 996 & 997 Turbo GT2 GT3 RS Cup & RSR (Each)

    SKU:996.111.107.71

    In Stock In Stock
    Original Porsche Exhaust to Head Manifold Gasket. Two per car ( Sold Each 1 ) Stainless Steel Fits 996 Turbo, 996 GT2, 996 GT3, 997 Turbo Gen-1 1999 to 2009 & 997 GT2, GT3, GT3RS & GT3 Cup 1999 to 2013. Note. Not for Porsche Boxster, Cayman or 911 Carrera models, (please see other gaskets listed.)
    £10.98 inc VAT £9.15 ex VAT
  • Exhaust Rear Silencer & Center Box Clamp 65mm All Models 2010-Onwards

    SKU:958.111.220.10

    In Stock In Stock
    Sold Each (1) For; Cayenne Centre & Rear Silencers (4) Macan Cat Down Pipe (1/2) Panamera Cat Down Pipe (1/2) 997 & 991 Rear Silencers (1/2)
    £32.99 inc VAT £27.49 ex VAT
  • Exhaust Silencer clamp sleeves (Pair) Cayenne Panamera Macan 911 997 991 Carrera

    SKU:955.111.220

    In Stock In Stock
    Sold per pair (2) these 65mm clamps fit at each end of the center exhaust pipe to connect the cat pipes and rear silencer boxes.
    £49.49 inc VAT £41.24 ex VAT
  • Exhaust Stainless Nut & Bolt Set 996 & 997 & 991 Carrera Boxster & Cayman 1997-O

    SKU:4436

    In Stock In Stock
    Contains; 12x Stainless Steel Manifld to Head Flange bolts and 6x sets of Manifold to Cat Pipe nuts & Bolts ( Generic picture )
    £21.99
  • Exhaust System Manifold to Cat Nut & Bolt Kit All Models 1965-Onwards (6 sets)

    SKU:4400

    In Stock In Stock
    For All system Joining Flanges. Includes 6x Flange Nuts & 6x Stainless Flange Bolts (6 sets in total ). Note. dose not include Head to manifold Flange Bolts (sold seperately)
    £16.49
  • GT3 & GT3 RS / GT3 Cup Stainless Steel Bolts & Gaskets Exhaust fitting Kit

    SKU:ECGT-6662

    In Stock In Stock
    EuroCupGT 911 GT3 A2 grade Stainless Exhaust Nut, Bolt & Gasket, kit, ideal when replacing or repairing your old System. Fits all cars 1999 to 2012
    £71.48 inc VAT £59.57 ex VAT
  • Manifold / Cat to Centre Box Gasket All Carrera models 2009-Onwards

    SKU:8080

    In Stock In Stock
    For All Gen2 997 Models 2009 onwards, except 997 Turbo & 997 GT3
    £10.98 inc VAT £9.15 ex VAT
  • Manifold to Turbo Gasket Triangle 996 & 997 Turbo / GT2 2005-2012

    SKU:997.111.215.70

    In Stock In Stock
    OEM Stainless Steel Gasket
    £8.78 inc VAT £7.32 ex VAT
  • OEM Tailpipe 997 Turbo Gen-2 Left side 2010-2012

    SKU:997.111.251.32

    In Stock In Stock
    OEM Tail Pipe For Gen-2 997 Turbo Models, 2010 onwards. Can be adapted to fitted to Gen-1 when updating bumper to Gen-2
    £499.98 inc VAT £416.65 ex VAT
  • OEM Tailpipe 997 Turbo Gen-2 Right side 2010-2012

    SKU:997.111.252.32

    In Stock In Stock
    OEM Tail Pipe For Gen-2 997 Turbo Models, 2010 onwards. Can be adapted to fitted to Gen-1 when updating bumper to Gen-2
    £499.98 inc VAT £416.65 ex VAT
  • Porsche 997 Carrera 2/4 2S/4S Clamping Sleeve Side to Rear Box OE Porsche

    SKU:8077

    In Stock In Stock
    OEM Porsche Clamp For All Gen2 Carrera 997 Models 2009 onwards, except 997 Turbo & 997 GT3. Original Porsche.
    £43.98 inc VAT £36.65 ex VAT
  • Porsche 997 GT3 & GT3 RS De-Cat Delete Exhaust System 2005-2012 (996 Cup)

    SKU:116239

    In Stock In Stock
    Full 304 Stainless Steel System. Allows for O2 sensors. All parts interchangeble with OEM system so side boxes or rear box can be retained if required. Comes with gaskets. Can also be retro fitted to 996 GT3 & 996 Cup models using a Centre Exhaust cut out bumper
    £1,979.99 inc VAT £1,649.99 ex VAT
  • Porsche 997 GT3 & GT3 RS Stainless Exhaust Manifolds (Without Cats) 2005-2012

    SKU:146345

    In Stock In Stock
    304 Stainless Steel Matched High Flow Manifolds. These are a direct replacement and fit directly onto the OEM Silencer System. Complete with O2 sensor holes. All GT3; 3.6L / 3.8L & 4.0L & GT3 Cup. (Also fits 991 GT3 Cup cars)
    £1,199.99 inc VAT £999.99 ex VAT
  • Porsche 997 GT3 / GT3RS Rear Exhaust Silencer Bypass / Delete 2005-2012

    SKU:126255

    In Stock In Stock
    997 GT3 / GT3RS Rear Exhaust Silencer Bypass / Delete. Direct bolt on replacement for OEM silencer. 304 Stainless For 3.6L 3.8L & 4.0L & GT3 Cup cars 2005 to 2012
    £824.99 inc VAT £687.49 ex VAT
  • Porsche 997 GT3 / RS Light Weight Carbon Fibre Tailpipe (Bolt On) 2005-2012

    SKU:06-8611

    In Stock In Stock
    Light weight 1kg Ideal for Track days by reducing rear end weight. can also be used on GT3 Body Kit conversions
    £199.99 inc VAT £166.66 ex VAT
  • Rear Silencer Box Strap 997 All 997 Carrera Gen-2 2010-2012

    SKU:8082

    In Stock In Stock
    Rear box strap for all 997 Gen-2 Carrera models.
    £54.98 inc VAT £45.82 ex VAT
  • Rear Silencer Strap OEM Stainless Steel Turbo 2000-2012 & GT3 2005-On

    SKU:18135

    In Stock In Stock
    £82.49 inc VAT £68.74 ex VAT
  • Stomski Racing Exhaust Manifold Stud Repair Kit All models 2009-Onwards

    SKU:SR069

    Out of Stock Out of Stock
    For the current generation of Porsche DFI Engines on 911/997/991/ Boxster & Cayman. (9A1) heads on the water-cooled engines are reporting broken exhaust bolts. Tasks ranging from a simple exhaust system update through an engine removal, are consistently plagued by snapped, rusted, and broken exhaust manifold bolts. Rarely can an accurate removal of the broken bolt be performed with the engine in the car, and even after removal, the task is time consuming and if not done carefully can lead to a damaged head or faulty repair. STOMSKI RACING's answer to these problems is the SR069, a kit that easily, accurately, and flexibly allows you to drill out the broken bolts - with the engine still in the car- saving time and headaches. A CNC milled plate indexes precisely off the broken bolts and/or bolt holes. Using our uniquely designed Thumb Screws, the SR069 plate is locked in place (by threading a Thumb Screw over a broken bolt or by using a supplied bolt threaded through the SR069 Thumb Screw). With the included pilot drills and drill guides, the faulty bolt can be drilled out, producing a perfectly perpendicular and centered hole that if necessary can be chased with an included M8x1.25 tap. Kit includes anodized aluminum fixture, drill bits, tap with extension, drill jigs/guides, Thumb Screws, and hardware in a sturdy storage case. Also includes our SR065D drill guide.
    £439.98 inc VAT £366.65 ex VAT
  • Tail Pipe Clamp All Models 2010-Onwards Sold Each ( 2 per Car)

    SKU:8081

    In Stock In Stock
    For All Carrera & Panamera Models 2009 onwards, except 911 Turbo or GT3
    £32.99 inc VAT £27.49 ex VAT
  • Wiper Arm Flange Lock Nut Also for All Exhausts & 911 Engine case (Sold Each)

    SKU:N.011.008.8

    In Stock In Stock
    Size M8 (13mm)
    £1.09