You have no items in your shopping cart.
Porsche 997 Gen 2 Suspension Upgrades 2010 to 2012
Porsche 997 Gen 2 - Suspension Upgrades - 2010 to 2012
-
Adjustable Anti Roll Bar Drop Link Kit Front All 964 993 & 996/997 C4S Turbo GT3
SKU:19451
In StockIdeal for All Standard, H&R and AP Anti Roll bars where added compliance is required on setup. Front for; 964 All 993 All 996 C4S Turbo GT2 & GT3 997 GT2 & GT3 Also use on Bilteine Coil Over Kits on All Carrera Models. Note. Please use Year & Model drop downs when checking out -
Adjustable Anti Roll Bar Drop Link Kit Rear All Models 1978-Onwards ( Pair )
SKU:19450
In StockIdeal for All Standard. H&R and AP Roll bars where added compliance is required on setup. -
Agency Power Full Handling kit 996 & 997 Carrera Turbo & GT3 Models 1998-2012
SKU:AP996390
In StockThe Agency Power Racing Suspension Package includes all the upgraded products you need to take your Porsche to the next level in handling. At this point, your car should already have some type of coil overs and sway bars installed. These components will be added to your current setup to improve handling functions geared toward the track enthusiast. -
Elephant Racing Litronic Bracket Kit for GT3-R Type Control Arms
SKU:ER2180009
Out of StockLitronic adapter to attach litronic sending unit to GT3-R type control arms. Order 1 kit per pair of GT3-R type control arms. -
EuroCupGT Adjustable Rear Upper Control Arm Kit 996 / 997 Carrera, GT3 & Turbo
SKU:7370
Out of StockSet of 4 Heave duty adjustable rear upper control arms. Ideal for Camber set ups and clearance, when using larger wheel & tyre sizes where Geometry is limited with standard control arms. All models 1998-2012 -
EuroCupGT Adjustable Tension Control Arms 996 Fr & Re / 986 Front & 997 Rear
SKU:EURO6435
In StockEuroCupGT uprated suspension tension bars replace the cast aluminium arms & allow for neutral adjustment when setting up your cars geometry. The rubber bushing is replaced with a Rose Joint to allow for more accurate handling. Fits the following: All 996 Models inc GT3 & Turbo Front & Rear All Boxster 986 Front Only All 997 Models inc GT3 & Turbo Rear Only -
EuroCupGT Billet Front Chassis Strength Plates Porsche 996 997 Boxster Cayman
SKU:18934
In StockThese EuroCupGT-Pro Billet Plates add Strength to the factory Wing Panel & can be used with Standard or Motorsport Top Mounts. ( Sold as a Pair ) Fits All Models 1997 -2012 -
EuroCupGT Front Tension Rods 997 Carrera Turbo / 987 Boster & Cayman 2005-2012
SKU:7796
Out of StockEuroCupGT uprated Front suspension tension bars replace the cast aluminium arms & allow for neutral adjustment when setting up your cars geometry. The rubber bushing is replaced with a Rose Joint to allow for more accurate handling. Fits the following: Boxster 987 Front Only Cayman 987 Front Only All 997 Models inc GT3 & Turbo Front Only -
EuroCupGT Spring & Damper Coil Over Kit 997 C2/4 C2S/4S & Turbo Models 2005-2012
SKU:19574
In StockEuroCupGT Super Sport damper design helps eliminate discomfort resulted from bump steer on rough roads. Sports dampers enables you to adjust the ride height with a 30-way damping adjustment. Fully Top Adjustable All Round, comes with Alloy Top Mounts all round and Front Camber Adjustment Plates. Ideal for All Fast Road & Track cars For all 2 wheel drive Models -
EuroCupGT-Pro Bilstein Coil-Over Spring Seat & Locking Ring 2 1/2" 63mm (1)
SKU:18940
Out of Stock2 1/2-INCH (63MM) LOWER SPRING SEAT PLATFORM or LOCKING RING. For Bilstein & EuroCupGT-Pro Coil Over Kits. Manufactured from HE30 Aluminium, for use supporting the spring coil over. These are one of the most popular parts in our suspension range, this adapter is lightweight and has been developed specially for maximum strength and control. Sold Each (1) -
EuroCupGT-Pro C Spanner for 2 1/2" 63mm for Porsche Bilstein Suspension Rings
SKU:18947
In Stock2 1/2-INCH (63MM) PRECISION C SPANNER FOR All Porsche Bilstein Koni & EuroCupGT Suspension. The Pro C spanner is for the ease of adjusting on the ride height of your Porsche without damaging the aluminium platforms and locking rings. This is a drop forged professional spanner. -
EuroCupGT-Pro C Spanner for 2 1/4" 57mm for Porsche & Bilstein Suspension Rings
SKU:18948
In Stock2 1/4-INCH (57MM) PRECISION C SPANNER FOR All Porsche Bilstein Koni & EuroCupGT Suspension. The Pro C spanner is for the ease of adjusting on the ride height of your Porsche without damaging the aluminium platforms and locking rings. This is a drop forged professional spanner. -
EuroCupGT-Pro Coil-Over Assister Spring Seat Retainer Ring 2 1/2" 63mm (1)
SKU:18943
In Stock2 1/2-INCH (63MM) HELPER SPRING PLATFORM. The 2 1/2" Double Helper Adaptor manufactured from HE30 Aluminium, for use when fitting helper spring. These are part of the EuroCupGT-Pro suspension range, but can be used on all 2 1/2" 63mm Spring Setups inc Bilstein & Koni etc. This adapter is lightweight and has been developed specially for maximum strength and control. ( Sold Each ) -
EuroCupGT-Pro Coil-Over Assister Spring Seat Retainer Ring 2 1/4" 57mm (1)
SKU:18942
In Stock2 1/4-INCH (57MM) HELPER SPRING PLATFORM. The 2 1/4" Double Helper Adaptor manufactured from HE30 Aluminium, for use when fitting helper spring. These are part of the EuroCupGT-Pro suspension range, but can be used on all 2 1/4" 57mm Spring Setups inc Bilstein & Koni etc. This adapter is lightweight and has been developed specially for maximum strength and control. ( Sold Each ) -
EuroCupGT-Pro Front Coil Over Universal Conversion Kit All Models (One Axle Pair
SKU:18936
Out of StockDesigned to fit over your standard Front Damper Cases, this kit allows the use of 2 1/2" (63mm ID) Motorsport Springs. These Spring Conversion kits are ideal for Bilstein & Koni applications. Manufactured from HE30 Aluminium, this spring conversion kit gives you the option to adjust the ride height & corner Weights of your Porsche very effectively. These are lightweight and have been developed specially for maximum strength and control. Note. On most models you will need to have the Standard spring seats removed to allow for clearance over the damper tube. Can Be used on Front or Rear Applications as required. -
EuroCupGT-Pro Front GT3 Type Coil-Over Spring Top Hats 2 1/2" 63mm All Models (2
SKU:18938
In StockThese 2 1/2-INCH (63MM) Top Spring Retainers come with a a 10mm pilot hole which can be drilled if needed to 12mm or 14mm or as required. Ideal for Bilstein & Koni or GT3 applications. Manufactured from HE30 Aluminium, for use supporting spring coil-over. These are one of the popular parts in our suspension range, thes retainers are lightweight and have been developed specially for maximum strength and control. -
EuroCupGT-Pro GT3 Adjustable Front Top Mounts Porsche 996 997 Boxster & Cayman
SKU:18933
In StockEuroCupGT-Pro GT3 & GT3RS Adjustable Camber Front Top mountings, these Billet Front mounts are Ideal for Fast Road, Track Day & Race & Rally cars. Can be fitted with Standard or Coil-Over Suspension Kits. ( Sold as a Pair ) Note. Bilstien B9 & Other aftermarket Coil Over kits do not come with any Top Mounts. -
EuroCupGT-Pro Motorsoprt Adjustable Fork Arms All 997 Rear & GT3 / RS Front
SKU:18931
Out of StockRace Proven, these adjustable Fork Arms are modeled on the Porsche Motorsport RSR fitment. ( sold as a Pair ) 997 Carrera C2S C4S GTS Turbo & GT3/RS Rear On; All 997 Models Front Only On; 997 GT2 GT3 & GT3 Cup -
EuroCupGT-Pro Rear Coil Over Universal Conversion Kit All Models (One Axle Pair)
SKU:18937
Out of StockDesigned to fit over your standard Rear Damper Cases, this kit allows the use of 2 1/4" (57mm ID) Motorsport Springs. These Spring Conversion kits are ideal for Bilstein & Koni applications. Manufactured from HE30 Aluminium, this spring conversion kit gives you the option to adjust the ride height & corner Weights of your Porsche very effectively. These are lightweight and have been developed specially for maximum strength and control. Note. On most models you will need to have the Standard spring seats removed to allow for clearance over the damper tube. Can Be used on Front or Rear Applications as required. -
EuroCupGT-Pro Rear GT3 Type Coil-Over Spring Top Hats 2 1/4" 57mm All Models (2)
SKU:18939
In StockThese 2 1/4-INCH (57MM) Top Spring Retainers come with a a 10mm pilot hole which can be drilled if needed to 12mm or 14mm or as required. Ideal for Bilstein & Koni or GT3 applications. Manufactured from HE30 Aluminium, for use supporting spring coil-over. These are one of the popular parts in our suspension range, thes retainers are lightweight and have been developed specially for maximum strength and control. -
EuroCupGT-Pro Rear Motorsport Monoball Top Mounts All 996 & 997 Models 1997-2012
SKU:18944
Out of StockSimilar to the GT3 Cup & RSR Race mountings, these Billet Rear mounts are Ideal for Fast Road, Track & Race cars. Can be fitted with Standard or Coil-Over Kits. Note. Bilstien B9 & Other aftermarket Coil Over kits do not come with Top Mounts. -
EuroCupGT-Pro Rear Type Coil-Over Spring Seat & Locking Ring 2 1/4" 57mm (1)
SKU:18941
Out of Stock2 1/4-INCH (57MM) LOWER SPRING SEAT PLATFORM or LOCKING RING. For EuroCupGT-Pro Coil Over Kits. Manufactured from HE30 Aluminium, for use supporting the spring coil over. These are one of the most popular parts in our suspension range, this adapter is lightweight and has been developed specially for maximum strength and control. Sold Each (1) -
EuroCupGTBillet Front Chassis Strength Plates Porsche 996 997 Boxster & Cayman
SKU:18935
In StockThese EuroCupGT-Pro GT3 Billet Plates add Strength to the factory Wing Panel & can be used with Standard or Motorsport Top Mounts. ( Sold as a Pair ) Fits All Standard GT2 & GT3 / RS Models 1997 -2012 Also Any car using Porsche Stomski or EuroCupGT-Pro Top Mounts. -
-
Front Fork Arm Subframe to Wishbone Porsche 996 Carrera Turbo GT3 Boxster 997GT3
SKU:5853
In StockOEM Front Fork Arm All Models 1997-2004. Also Used on 997 GT3 GT3RS & GT2. And With GT3 Coffin Arms on later Carrera Boxster & Cayman 987 Models -
-
Front Suspension Top Spacer between Top Mount & Spring Cap All GT2 & GT3 / RS
SKU:18403
In StockOEM Bush for Pillow Ball Top Mount under mounting. Can be used on Aftermarket Applications & GT3 Cup Cars -
Front Top Mount 997 C4 / C4S & 997 Turbo LEFT 2005-2012
SKU:11357
In StockOEM Top Mount for all 4 wheel drive cars only. Handed -
Front Top Mount 997 C4 / C4S & 997 Turbo RIGHT 2005-2012
SKU:11358
In StockOEM Top Mount for 4 wheel drive cars only. Handed -
GT3 Adjustable Front Anti Roll Bar Porsche 997 C2 C4 Turbo Boxster Cayman 2005-
SKU:997GT3BAR
Out of StockOEM, fully adjustable with four positions available, & optimum performance, the factory GT3 swaybar is light weight hollow 26.8mm OD sway bars are half the weight of a solid bar with the same stiffness. Fits Boxster Cayman & All 997 models. (Includes Bushes) -
GT3 CUP / RSR ADJUSTABLE CASTOR THRUST BUSH FOR COFFIN ARM
SKU:SR087
In StockWhether doing a complete suspension upgrade, eliminating the overly-compliant rubber thrust arm bushings that lead to unpredictable camber changes, or searching for more range of adjustment for your suspension, STOMSKI RACING's Adjustable Thrust Arm Bushings are the answer to your needs. Installing these high quality 6061 aluminum anodized bushings will provide better feedback and handling without leading to unwanted road noise on either your dedicated track car or daily driver. By upgrading to STOMSKI RACING's Adjustable Thrust Arm Bushings for all four control arms on your car, unwanted suspension changes caused by the standard flexible bushings will be a thing of the past, and thus your lap times will improve as your handling increases. Fits; Front All 996 / 986 Boxster. Rear; All 996 / 997 Carrera / GT3 / Turbo / GT2, 986 / 987 Boxster, and Cayman. Sold as One set for 1 wishbone. ( 2 kits needed per axle ) -
GT3 Cup FIXED COFFIN ARM BUSHING 996 997 Carrera Turbo 986 987 Boxster & Cayman
SKU:SR088
In StockNot all suspension upgrades will require an adjustable castor / camer arm bushing like the SR087, thus the STOMSKI RACING's Fixed Thrust Arm Bushings provide the perfect solution for your application a standard Geometry setting is all that is required to prevent unpredictable camber changes. Installing these high quality 6061 aluminum anodized bushings will provide better feedback and handling without leading to unwanted road noise on either your dedicated track car or daily driver. By upgrading to STOMSKI RACING's Fixed Thrust Arm Bushings for all four control arms on your car, unwanted suspension changes caused by the stock flexible bushings will be a thing of the past, and thus your lap times will improve as your handling increases. Fits; Front; All 996 & 986 Boxster. Rear; All 996 / 997 Carrera / GT3 / Turbo / GT2, 986 / 987 Boxster, and Cayman. Sold as One set for 1 wishbone. ( 2 kits needed per axle ). -
GT3 Split Wishbone Ball Joint Front & Rear 1999-2012 GT3RS Cup & RSR
SKU:1986
Out of StockOEM Wishbone Coffin Arm Front & Rear Applications. For All GT2 / GT3 RS. Also Motorsport Applications; on Boxster 996 & 997. Note. Handed so please denote Left or Right on ordering. -
GT3 Wishbone complete OEM Fits All Models 1997-2012 Sold Each (1)
SKU:18809
In StockOEM Adjustable Wishbone Coffin Arm Complete. Price is for one (1) complete Arm. -
GT3 Wishbone Pivot Joint for Wishbone Ball Joint ( Fits Front & Rear ) 1997-2012
SKU:18389
In StockOEM Inner Part Only. Fits all models Front & Rear. Sold Each (1) INNER PART ONLY Note. dose not include the main arm in picture. ( shown for reference only ) -
H&R Anti Roll (Sway) Bars Front & Rear 997 C2 & C2S / GTS 2005-2012
SKU:5534
In StockFront 24mm & Rear 24mm diameter, Reduces Body Roll, Increases lateral stiffness, Improves handling. An exact fit & incomparable performance in every application. Heat-treated & shot-peened for increased hardness & life, Powder coated. Comes with Teflon composite bushings. For All Manual Models , -
H&R Anti Roll (Sway) Bars Front & Rear 997 C4 C4S & Turbo 2005-2012
SKU:5536
Out of StockFront 26mm & Rear 24mm diameter, Reduces Body Roll, Increases lateral stiffness, Improves handling. An exact fit & incomparable performance in every application. Heat-treated & shot-peened for increased hardness & life, Powder coated. Comes with Teflon composite bushings. For All 4 wheel drive Models , -
H&R Lowering Spring kit 997 C4 /C4S & GTS 2005-2012
SKU:4025
In StockLowers car by 25mm Set of 4. For 997 Carrera 4 / 4S & GTS -
H&R Lowering Spring Kit 997 Turbo 20-25mm 2005-2012
SKU:1440
In StockLowers car by 20 -25mm Set of 4. For 997 Turbo 2005 -On -
H&R Lowering Spring Kit All Carrera 2 & C2S 2005-2012
SKU:2356
Out of StockHigh quality Smooth & progressive. For All 2 wheel drive Carrera models. -25mm -
H&R Lowering Spring Kit Carrera 2 / C2S & Cabriolet (15mm ) 1998-2012
SKU:5003CAB
Out of StockHigh Quality Smooth & progressive ( set of 4). Lowers car by 15mm. Note Only for rear wheel drive cars ( Not C4 or C4S ) -
Lower Wishbone Control Arm Adjusting Shim 10mm GT3 / RS Coffin Arm 1997-On
SKU:996.341.543.95
In Stock -
Lower Wishbone Control Arm Adjusting Shim 1mm GT3 / RS Coffin Arm 1997-On
SKU:996.341.543.90
In Stock -
Lower Wishbone Control Arm Adjusting Shim 2mm GT3 / RS Coffin Arm 1997-On
SKU:996.341.543.33
In Stock -
Lower Wishbone Control Arm Adjusting Shim 3mm GT3 / RS Coffin Arm 1997-On
SKU:996.341.543.92
In Stock -
Lower Wishbone Control Arm Adjusting Shim 5mm GT3 / RS Coffin Arm 1997-On
SKU:996.341.543.99
In Stock -
Lower Wishbone Control Arm Adjusting Shim 7mm GT3 / RS Coffin Arm 1997-On
SKU:996.341.543.93
In Stock -
Lowering Spring Kit 996 C2 / 997 C2 / C2S 1998-2012 (set of 4)
SKU:7502
Out of StockSet of 4 lowering springs for 996/997 C2 & C2S Models 1998 to 2012. SPAX spring kits are progressively wound. This offers a softer ride at low speeds & a stiffer ride at high speeds, when you need it most. (Also fits Early 996 C4 1998 -2000 Models) -
-
Porsche 996 & 997 Rear Carbon Fiber Strut Brace Carrera 2 4 S Turbo 911 GT3 RS
SKU:11406
In StockRear Light Weight & Polished Carbon & Alloy Strut Brace. Fits on Suspension Top Mounts inside cabin. For All Models 1997 -2012 inc all Carrera 2 / 4 / C4S GT3/RS Turbo & GTS Models -
Rear Adjustable Anti Roll Bar Drop Links All 997 Carrera Turbo & GT3 2005-2012
SKU:APRX8205
In Stock997/S / 997TT, GT2/3 & RS Rear adjustable Anti Roll bar drop links 2005-2012 ( Also fits All 996 models 98-2004 ) Per Pair (2) To complete suspension upgrades, these sway bar links to go hand and hand with the solid AP Anti Roll bars or Oem bars along with the AP rear control arm kit. Roll bar links offer you adjustability for setting up the suspension, these will enable you to properly corner weight your car for optimal handling. The 6061 CNC machined centres have flats cut in place for easy access for adjustments, one of the most over looked parts of suspension is the spherical rod ends. Agency Powers spherical rod ends are designed in stainless steel and have a Teflon liner sold in pairs for all 997 2004-2012 cars ( Also fits 996 models ) -
Rear Adjustable Toe Link Kit Porsche 996 997 & 986 987 981 Boxster & Cayman
SKU:7632
In StockEuroCupGT rear adjustable toe links arms adjusts camber & dials in the toe for the rear. These adjustable toe links are design to give you a more responsive rear end along with the ability to dial in the toe on the rear end more precisely. These do both Toe and vertical compliance for parallel arms. Fits; All 996 models inc GT3 & Turbo All 997 Models Inc GT3 & Turbo All Boxster 986 987 981 & 718 Models All Cayman 987 981 & 718 Models -
Rear Subframe Bush All 996 & 997 Carrera Turbo & GT3 Models 1998-2012
SKU:4320
In StockPriced each 1, ( 4 per car per side ). For All Carrera, Turbo & GT3 models 1997 to 2012 Easy fit, Ideal for fast road / Track & motorsports applications. Improves rear compliance in all conditions -
Rear Toe Link Bolts All Models 1997-2012
SKU:997.331.217.02
In StockFor Rear Suspension Toe / Track Arm. All Models inc Turbo & GT3 -
Rear Track Control Arm Toe Link Poly Bush Kit (2) All Models 1997-2012
SKU:18797
Out of StockComplete kit for both sides. Improves set ups no end. -
Spring Caps All Coil Over Applications & Billet Top Mounts & Bilstein B9 (pair)
SKU:17128
In StockOn applications using Adjustable Camber Plates Front & Rear. With spring ID of 62mm 2 1/4" using Spring Top Hats. Sold as a set of two. For all Spax & Bilstein B9 & B12 for 964 993 996 & 977 Turbo, GT3, RS. 924/944/968 M030. Boxster & Cayman R / GT4 etc -
Stomski Racing Front Top Mounts Porsche 996 997 Boxster & Cayman 1997-2012 (x2)
SKU:SR121
In StockFactory rubber Front shock mounts deflect under load and distort suspension settings, leading to poor tire wear, poor grip, poor handling, and slower laps times. STOMSKI RACING's Front Camber Plates ensure that your tyre investment is optimised, providing for the best grip, the best handling, and the fastest lap times. CNC machined from aircraft quality Billet Alloy and anodized for great looks and protection, Front Camber Plates deliver maximum range, the most precise tuning, the smoothest suspension travel, the easiest and the most accurate adjustment for your car. Include the finest quality aerospace monoballs as well as stainless steel hardware. Available with stainless steel bushings. Sold Per Pair Fits 986 / 987 Boxster, S, Cayman,S, 996 & 997 Carrera, S, Turbo & GT3 -
Stomski Racing Rear Control Arm & Rear Toe Arm Lock Out Plate Kit. All Models
SKU:SR084
In StockThese precision machined stainless steel RSR Spec plates provide a sure lock to eliminating unwanted camber changes caused by the factory eccentric moving under load. By bolting these plates to the chassis on the inboard end of the Rear control arm ( Coffin Arm ) or on the inboard end of the Rear Toe Arm ( Rear Toe ), the control arms will now be held in a constant, fixed position. Ideal when using RSR Spec adjustable Control arms. Fits all Models; 996, 997, Boxster, and Cayman 1997 to 2012 -
Stomski Racing Rear Strut Top Mounts All 996 & 997 Carrera Turbo & GT3 ( Pair)
SKU:SR120
In StockBillet Rear Top Mounts. Stock rubber rear shock mounts can deflect under load and distort suspension settings, leading to poor tyre wear, poor grip, poor handling, and slower laps times. STOMSKI RACING's 996 / 997 Carrera Cup Style Rear Shock Monoball Top Mounts ensure that your settings are optimised, providing for the best grip, the best handling, and the fastest lap times. CNC machined from aircraft quality Billet aluminuim and anodized for great looks and protection, these Rear Shock Mounts deliver maximum range, the most precise tuning, the smoothest suspension travel, the easiest and the most accurate adjustment for your car. SR120 reconfigured geometry automatically allows for lowering of 16mm compared to factory & Cup Car mounts. Include the finest quality aerospace monoballs available, as well as stainless steel hardware. Comes with 12mm or 14mm stainless steel bushings. Can also be used with Bilstien & Other Coil over Suspension kits Also. (Pair) -
Stomski Racing RSR Spec Rear Toe Control Arm Kit. All Models. 1997 to 2012
SKU:SR082
In StockPrecision alignment and Anti bump steer set up are critical for good handling, these RSR spec Rear Toe Control Arms are fabricated to exacting tolerances and standards, provide the premier upgrade for your track or street car. Using aerospace quality rod ends and components to provide for the most durable, accurate part available. With a left and right hand double adjuster the RSR toe link allows for extremely precise and infinite adjustment to fine tune suspension settings. Also included are seals to protect the monoballs in exposed environment. Sold p/pair Fits all Models; 996, 997, Boxster, and Cayman 1997 to 2012 (pair) -
Wishbone Bush Inner Front & Rear All Porsche Boxster Cayman 996 & 997 1997-2012
SKU:4314
Out of StockPriced each , Two pairs per Axle. For All Models Front & Rear 1997 to 2012