You have no items in your shopping cart.
Porsche Boxster 986 Suspension Upgrades 1997 to 2004
Porsche Boxster 986 - Suspension Upgrades - 1997 to 2004
-
Wishbone Bush Outer for All Front & Rear Porsche Boxster & 996 Models 1997-2012
SKU:4315
In StockPriced each , Two pairs per car, For All Carrera Models plus Turbo & GT3 1997 to 2004 -
Wishbone Bush Inner Front & Rear All Porsche Boxster Cayman 996 & 997 1997-2012
SKU:4314
Out of StockPriced each , Two pairs per Axle. For All Models Front & Rear 1997 to 2012 -
Stomski Racing RSR Spec Rear Toe Control Arm Kit. All Models. 1997 to 2012
SKU:SR082
In StockPrecision alignment and Anti bump steer set up are critical for good handling, these RSR spec Rear Toe Control Arms are fabricated to exacting tolerances and standards, provide the premier upgrade for your track or street car. Using aerospace quality rod ends and components to provide for the most durable, accurate part available. With a left and right hand double adjuster the RSR toe link allows for extremely precise and infinite adjustment to fine tune suspension settings. Also included are seals to protect the monoballs in exposed environment. Sold p/pair Fits all Models; 996, 997, Boxster, and Cayman 1997 to 2012 (pair) -
Stomski Racing Rear Control Arm & Rear Toe Arm Lock Out Plate Kit. All Models
SKU:SR084
In StockThese precision machined stainless steel RSR Spec plates provide a sure lock to eliminating unwanted camber changes caused by the factory eccentric moving under load. By bolting these plates to the chassis on the inboard end of the Rear control arm ( Coffin Arm ) or on the inboard end of the Rear Toe Arm ( Rear Toe ), the control arms will now be held in a constant, fixed position. Ideal when using RSR Spec adjustable Control arms. Fits all Models; 996, 997, Boxster, and Cayman 1997 to 2012 -
Stomski Racing Front Top Mounts Porsche 996 997 Boxster & Cayman 1997-2012 (x2)
SKU:SR121
In StockFactory rubber Front shock mounts deflect under load and distort suspension settings, leading to poor tire wear, poor grip, poor handling, and slower laps times. STOMSKI RACING's Front Camber Plates ensure that your tyre investment is optimised, providing for the best grip, the best handling, and the fastest lap times. CNC machined from aircraft quality Billet Alloy and anodized for great looks and protection, Front Camber Plates deliver maximum range, the most precise tuning, the smoothest suspension travel, the easiest and the most accurate adjustment for your car. Include the finest quality aerospace monoballs as well as stainless steel hardware. Available with stainless steel bushings. Sold Per Pair Fits 986 / 987 Boxster, S, Cayman,S, 996 & 997 Carrera, S, Turbo & GT3 -
Spring Caps All Coil Over Applications & Billet Top Mounts & Bilstein B9 (pair)
SKU:17128
In StockOn applications using Adjustable Camber Plates Front & Rear. With spring ID of 62mm 2 1/4" using Spring Top Hats. Sold as a set of two. For all Spax & Bilstein B9 & B12 for 964 993 996 & 977 Turbo, GT3, RS. 924/944/968 M030. Boxster & Cayman R / GT4 etc -
Sports Suspension Kit M030 OE Porsche 986 Boxster S 3.2L 1999-2004
SKU:4026
Out of StockFull Set of Dampers & Springs, Combines shorter & stiffer springs with thicker anti-roll bars (front and rear) plus firmer bump and rebound on all four dampers. Ride height is lowered by 10 mm. -
Sports Suspension Kit M030 OE Porsche 986 Boxster 2.5L & 2.7L 1997-2004
SKU:4024
Out of StockFull Set of Dampers & Springs, Combines shorter & stiffer springs with thicker anti-roll bars (front and rear) plus firmer bump and rebound on all four dampers. Ride height is lowered by 10 mm. -
SPAX Lowering Spring Kit Porsche 986 Boxster & Boxster S 1997-2004
SKU:7506
Out of StockSet of 4 lowering springs for All Boxster Models inc Boxster S . Lowers car by 25mm. SPAX spring kits are progressively wound. This offers a softer ride at low speeds & a stiffer ride at high speeds, when you need it most. -
Rear Track Control Arm Toe Link Poly Bush Kit (2) All Models 1997-2012
SKU:18797
Out of StockComplete kit for both sides. Improves set ups no end. -
Rear Toe Link Bolts All Models 1997-2012
SKU:997.331.217.02
In StockFor Rear Suspension Toe / Track Arm. All Models inc Turbo & GT3 -
Rear Anti Roll Bar Droplink 986 Boxster Right Side 1997-2004
SKU:1236#rear
In StockOften the cause of suspension noise when going over bumps or rough roads. -
Rear Anti Roll Bar Droplink 986 Boxster Left Side 1997-2004
SKU:3092#rear
In StockOften the cause of suspension noise when going over bumps or rough roads -
Rear Adjustable Toe Link Kit Porsche 996 997 & 986 987 981 Boxster & Cayman
SKU:7632
In StockEuroCupGT rear adjustable toe links arms adjusts camber & dials in the toe for the rear. These adjustable toe links are design to give you a more responsive rear end along with the ability to dial in the toe on the rear end more precisely. These do both Toe and vertical compliance for parallel arms. Fits; All 996 models inc GT3 & Turbo All 997 Models Inc GT3 & Turbo All Boxster 986 987 981 & 718 Models All Cayman 987 981 & 718 Models -
PSS10 Spring & Damper Kits Porsche Boxster 986
SKU:GM5-8847
Out of StockRide height adjustable coil-over system with 9 different damping force settings.The damper settings are easily changed by turning the adjuster to fine tune for your driving style. The kit lowers by 30-60mm & is TUV approved -
Porsche Boxster Rear Motorsport Monoball Top Mounts (Flat Type) 1997-2012 (Pair)
SKU:18902
In StockSimilar to the GT3 Cup & RSR Race mountings, these Billet Rear mounts are Ideal for Fast Road, Track & Race cars. Can be fitted with Standard or Coil-Over Kits. Note. Bilstien B9 & Other aftermarket Coil Over kits do not come with Top Mounts. -
Lower Wishbone Control Arm Adjusting Shim 7mm GT3 / RS Coffin Arm 1997-On
SKU:996.341.543.93
In Stock -
Lower Wishbone Control Arm Adjusting Shim 5mm GT3 / RS Coffin Arm 1997-On
SKU:996.341.543.99
In Stock -
Lower Wishbone Control Arm Adjusting Shim 3mm GT3 / RS Coffin Arm 1997-On
SKU:996.341.543.92
In Stock -
Lower Wishbone Control Arm Adjusting Shim 2mm GT3 / RS Coffin Arm 1997-On
SKU:996.341.543.33
In Stock -
Lower Wishbone Control Arm Adjusting Shim 1mm GT3 / RS Coffin Arm 1997-On
SKU:996.341.543.90
In Stock -
Lower Wishbone Control Arm Adjusting Shim 10mm GT3 / RS Coffin Arm 1997-On
SKU:996.341.543.95
In Stock -
H&R Lowering Spring Kit 25-30mm All Porsche Boxster & Boxster S Models
SKU:4029
In StockLowers car by 25-30mm Set of 4 -
H & R Lowering Spring Kit -15mm Fits All 986 Boxster & S models 1997-2004
SKU:981330191
In StockOEM Quality German made Lowering spring set of 4 springs 10-15mm ( Similar to M030 ride height) -
GT3 Wishbone Pivot Joint for Wishbone Ball Joint ( Fits Front & Rear ) 1997-2012
SKU:18389
In StockOEM Inner Part Only. Fits all models Front & Rear. Sold Each (1) INNER PART ONLY Note. dose not include the main arm in picture. ( shown for reference only ) -
GT3 Wishbone complete OEM Fits All Models 1997-2012 Sold Each (1)
SKU:18809
In StockOEM Adjustable Wishbone Coffin Arm Complete. Price is for one (1) complete Arm. -
GT3 Front Anti Roll Bar. Fits All Models 1997-2004 OE Classic Porsche Parts
SKU:19063
In StockThicker & Stiffer to aid Turn-In and reduce body roll -
GT3 Cup FIXED COFFIN ARM BUSHING 996 997 Carrera Turbo 986 987 Boxster & Cayman
SKU:SR088
In StockNot all suspension upgrades will require an adjustable castor / camer arm bushing like the SR087, thus the STOMSKI RACING's Fixed Thrust Arm Bushings provide the perfect solution for your application a standard Geometry setting is all that is required to prevent unpredictable camber changes. Installing these high quality 6061 aluminum anodized bushings will provide better feedback and handling without leading to unwanted road noise on either your dedicated track car or daily driver. By upgrading to STOMSKI RACING's Fixed Thrust Arm Bushings for all four control arms on your car, unwanted suspension changes caused by the stock flexible bushings will be a thing of the past, and thus your lap times will improve as your handling increases. Fits; Front; All 996 & 986 Boxster. Rear; All 996 / 997 Carrera / GT3 / Turbo / GT2, 986 / 987 Boxster, and Cayman. Sold as One set for 1 wishbone. ( 2 kits needed per axle ). -
GT3 CUP / RSR ADJUSTABLE CASTOR THRUST BUSH FOR COFFIN ARM
SKU:SR087
In StockWhether doing a complete suspension upgrade, eliminating the overly-compliant rubber thrust arm bushings that lead to unpredictable camber changes, or searching for more range of adjustment for your suspension, STOMSKI RACING's Adjustable Thrust Arm Bushings are the answer to your needs. Installing these high quality 6061 aluminum anodized bushings will provide better feedback and handling without leading to unwanted road noise on either your dedicated track car or daily driver. By upgrading to STOMSKI RACING's Adjustable Thrust Arm Bushings for all four control arms on your car, unwanted suspension changes caused by the standard flexible bushings will be a thing of the past, and thus your lap times will improve as your handling increases. Fits; Front All 996 / 986 Boxster. Rear; All 996 / 997 Carrera / GT3 / Turbo / GT2, 986 / 987 Boxster, and Cayman. Sold as One set for 1 wishbone. ( 2 kits needed per axle ) -
Front Strut Brace Porsche 996 & Boxster S Carbon Fiber Fits Porsche Turbo C4S
SKU:00556
In StockThis EuroCupGT carbon fibre strut brace is more rigid & significantly lighter than the steel ones. It is fully adjustable to make fitting easy. All parts required to fit are included. The overall weight is around 900g -
Front Shocker Bump Stop For Sports Suspension PASM M030 Turbo & C4S 1997-On
SKU:996.343.980.09
In StockFor Turbo, C4S, Sports PASM & M030 Suspension -
Front Anti Roll Bar Droplink 996 C2 & 986 Boxster Right Side 1997-2004
SKU:3092
In StockOften the cause of suspension noise when going over bumps or rough roads -
Front Anti Roll Bar Droplink 996 C2 & 986 Boxster Left Side 1997-2004
SKU:1236
In StockOften the cause of suspension noise when going over bumps or rough roads. -
EuroCupGTBillet Front Chassis Strength Plates Porsche 996 997 Boxster & Cayman
SKU:18935
In StockThese EuroCupGT-Pro GT3 Billet Plates add Strength to the factory Wing Panel & can be used with Standard or Motorsport Top Mounts. ( Sold as a Pair ) Fits All Standard GT2 & GT3 / RS Models 1997 -2012 Also Any car using Porsche Stomski or EuroCupGT-Pro Top Mounts. -
EuroCupGT-Pro Rear Type Coil-Over Spring Seat & Locking Ring 2 1/4" 57mm (1)
SKU:18941
Out of Stock2 1/4-INCH (57MM) LOWER SPRING SEAT PLATFORM or LOCKING RING. For EuroCupGT-Pro Coil Over Kits. Manufactured from HE30 Aluminium, for use supporting the spring coil over. These are one of the most popular parts in our suspension range, this adapter is lightweight and has been developed specially for maximum strength and control. Sold Each (1) -
EuroCupGT-Pro Rear GT3 Type Coil-Over Spring Top Hats 2 1/4" 57mm All Models (2)
SKU:18939
In StockThese 2 1/4-INCH (57MM) Top Spring Retainers come with a a 10mm pilot hole which can be drilled if needed to 12mm or 14mm or as required. Ideal for Bilstein & Koni or GT3 applications. Manufactured from HE30 Aluminium, for use supporting spring coil-over. These are one of the popular parts in our suspension range, thes retainers are lightweight and have been developed specially for maximum strength and control. -
EuroCupGT-Pro Rear Coil Over Universal Conversion Kit All Models (One Axle Pair)
SKU:18937
Out of StockDesigned to fit over your standard Rear Damper Cases, this kit allows the use of 2 1/4" (57mm ID) Motorsport Springs. These Spring Conversion kits are ideal for Bilstein & Koni applications. Manufactured from HE30 Aluminium, this spring conversion kit gives you the option to adjust the ride height & corner Weights of your Porsche very effectively. These are lightweight and have been developed specially for maximum strength and control. Note. On most models you will need to have the Standard spring seats removed to allow for clearance over the damper tube. Can Be used on Front or Rear Applications as required. -
EuroCupGT-Pro Motorsoprt Adjustable Fork Arms All 996 & Boxster 986 1997-2004
SKU:18930
Out of StockRace Proven, these adjustable Fork Arms are modeled on the Porsche Motorsport RSR fitment. ( sold as a Pair ) 996 Carrera Turbo & GT3/RS Fits Front & Rear ( Requires one Pair for each Axle ) 986 Boxster Front Only -
EuroCupGT-Pro GT3 Adjustable Front Top Mounts Porsche 996 997 Boxster & Cayman
SKU:18933
In StockEuroCupGT-Pro GT3 & GT3RS Adjustable Camber Front Top mountings, these Billet Front mounts are Ideal for Fast Road, Track Day & Race & Rally cars. Can be fitted with Standard or Coil-Over Suspension Kits. ( Sold as a Pair ) Note. Bilstien B9 & Other aftermarket Coil Over kits do not come with any Top Mounts. -
EuroCupGT-Pro Front GT3 Type Coil-Over Spring Top Hats 2 1/2" 63mm All Models (2
SKU:18938
In StockThese 2 1/2-INCH (63MM) Top Spring Retainers come with a a 10mm pilot hole which can be drilled if needed to 12mm or 14mm or as required. Ideal for Bilstein & Koni or GT3 applications. Manufactured from HE30 Aluminium, for use supporting spring coil-over. These are one of the popular parts in our suspension range, thes retainers are lightweight and have been developed specially for maximum strength and control. -
EuroCupGT-Pro Front Coil Over Universal Conversion Kit All Models (One Axle Pair
SKU:18936
Out of StockDesigned to fit over your standard Front Damper Cases, this kit allows the use of 2 1/2" (63mm ID) Motorsport Springs. These Spring Conversion kits are ideal for Bilstein & Koni applications. Manufactured from HE30 Aluminium, this spring conversion kit gives you the option to adjust the ride height & corner Weights of your Porsche very effectively. These are lightweight and have been developed specially for maximum strength and control. Note. On most models you will need to have the Standard spring seats removed to allow for clearance over the damper tube. Can Be used on Front or Rear Applications as required. -
EuroCupGT-Pro Coil-Over Assister Spring Seat Retainer Ring 2 1/4" 57mm (1)
SKU:18942
In Stock2 1/4-INCH (57MM) HELPER SPRING PLATFORM. The 2 1/4" Double Helper Adaptor manufactured from HE30 Aluminium, for use when fitting helper spring. These are part of the EuroCupGT-Pro suspension range, but can be used on all 2 1/4" 57mm Spring Setups inc Bilstein & Koni etc. This adapter is lightweight and has been developed specially for maximum strength and control. ( Sold Each ) -
EuroCupGT-Pro Coil-Over Assister Spring Seat Retainer Ring 2 1/2" 63mm (1)
SKU:18943
In Stock2 1/2-INCH (63MM) HELPER SPRING PLATFORM. The 2 1/2" Double Helper Adaptor manufactured from HE30 Aluminium, for use when fitting helper spring. These are part of the EuroCupGT-Pro suspension range, but can be used on all 2 1/2" 63mm Spring Setups inc Bilstein & Koni etc. This adapter is lightweight and has been developed specially for maximum strength and control. ( Sold Each ) -
EuroCupGT-Pro C Spanner for 2 1/4" 57mm for Porsche & Bilstein Suspension Rings
SKU:18948
In Stock2 1/4-INCH (57MM) PRECISION C SPANNER FOR All Porsche Bilstein Koni & EuroCupGT Suspension. The Pro C spanner is for the ease of adjusting on the ride height of your Porsche without damaging the aluminium platforms and locking rings. This is a drop forged professional spanner. -
EuroCupGT-Pro C Spanner for 2 1/2" 63mm for Porsche Bilstein Suspension Rings
SKU:18947
In Stock2 1/2-INCH (63MM) PRECISION C SPANNER FOR All Porsche Bilstein Koni & EuroCupGT Suspension. The Pro C spanner is for the ease of adjusting on the ride height of your Porsche without damaging the aluminium platforms and locking rings. This is a drop forged professional spanner. -
EuroCupGT-Pro Bilstein Coil-Over Spring Seat & Locking Ring 2 1/2" 63mm (1)
SKU:18940
Out of Stock2 1/2-INCH (63MM) LOWER SPRING SEAT PLATFORM or LOCKING RING. For Bilstein & EuroCupGT-Pro Coil Over Kits. Manufactured from HE30 Aluminium, for use supporting the spring coil over. These are one of the most popular parts in our suspension range, this adapter is lightweight and has been developed specially for maximum strength and control. Sold Each (1) -
EuroCupGT Spring & Damper Coilover Kit All 986 Boxser & Boxster S 1997-2004
SKU:7340
In StockEuroCupGT Super Sport damper design helps eliminate discomfort resulted from bump steer on rough roads. Sports dampers enables you to adjust the ride height with a 30-way damping adjustment. Fully Top Adjustable All Round, comes with Alloy Top Mounts all round and Front Camber Adjustment Plates. Ideal for All Fast Road & Track cars For all Boxster Models -
EuroCupGT Rear Adjustable Tension Control Arm Porsche 986 987 Boxster Cayman -12
SKU:EURO6435BOX
In StockEuroCupGT uprated rear suspension tension bars replace the cast aluminium arms & allow for neutral adjustment when setting up your cars geometry. The rubber bushing is replaced with a rose joint to allow for more accurate handling. Fits the following: All Boxster 1997 -2012 All Cayman Models 2005 -2012 -
-
EuroCupGT Billet Front Chassis Strength Plates Porsche 996 997 Boxster Cayman
SKU:18934
In StockThese EuroCupGT-Pro Billet Plates add Strength to the factory Wing Panel & can be used with Standard or Motorsport Top Mounts. ( Sold as a Pair ) Fits All Models 1997 -2012 -
EuroCupGT Adjustable Tension Control Arms 996 Fr & Re / 986 Front & 997 Rear
SKU:EURO6435
In StockEuroCupGT uprated suspension tension bars replace the cast aluminium arms & allow for neutral adjustment when setting up your cars geometry. The rubber bushing is replaced with a Rose Joint to allow for more accurate handling. Fits the following: All 996 Models inc GT3 & Turbo Front & Rear All Boxster 986 Front Only All 997 Models inc GT3 & Turbo Rear Only -
Elephant Racing Litronic Bracket Kit for GT3-R Type Control Arms
SKU:ER2180009
Out of StockLitronic adapter to attach litronic sending unit to GT3-R type control arms. Order 1 kit per pair of GT3-R type control arms. -
-
-
Agency Power Front & Rear Adjustable Anti Roll Bar links (Pair) All Models
SKU:19007
Out of StockImproving upon handling on any car is a must for achieving the best driving results. However, with a mid engine, rear wheel drive cars over & under steer poses a big problem. One of the first steps is upgrading the sway bar links to control this. Fits all Cayman & Boxster models 1998- 2012 996 ( set of 2 / one Axle ) Note; for full car set please order two kits