Due to business re-location, we are unable to take any orders until further notice. Please contact us via the Contact Us page with any queries regarding existing orders.
We are sorry for any inconvenience
Choose Currency

Porsche Boxster 987 Gen 2 Suspension Upgrades 2009 to 2012

Porsche Boxster 987 Gen 2 - Suspension Upgrades - 2009 to 2012

  • Agency Power Front & Rear Adjustable Anti Roll Bar links (Pair) All Models

    SKU:19007

    Out of Stock Out of Stock
    Improving upon handling on any car is a must for achieving the best driving results. However, with a mid engine, rear wheel drive cars over & under steer poses a big problem. One of the first steps is upgrading the sway bar links to control this. Fits all Cayman & Boxster models 1998- 2012 996 ( set of 2 / one Axle ) Note; for full car set please order two kits
    £439.99 inc VAT £366.66 ex VAT
  • EuroCupGT Billet Front Chassis Strength Plates Porsche 996 997 Boxster Cayman

    SKU:18934

    In Stock In Stock
    These EuroCupGT-Pro Billet Plates add Strength to the factory Wing Panel & can be used with Standard or Motorsport Top Mounts. ( Sold as a Pair ) Fits All Models 1997 -2012
    £65.99 inc VAT £54.99 ex VAT
  • EuroCupGT Front Tension Rods 997 Carrera Turbo / 987 Boster & Cayman 2005-2012

    SKU:7796

    Out of Stock Out of Stock
    EuroCupGT uprated Front suspension tension bars replace the cast aluminium arms & allow for neutral adjustment when setting up your cars geometry. The rubber bushing is replaced with a Rose Joint to allow for more accurate handling. Fits the following: Boxster 987 Front Only Cayman 987 Front Only All 997 Models inc GT3 & Turbo Front Only
    £324.49 inc VAT £270.41 ex VAT
  • EuroCupGT Lowering Spring Kit Porsche Boxster 987 All Models 2005-2012

    SKU:30PO08

    In Stock In Stock
    Lowers car by 30mm Set of 4, For All Models
    £197.99 inc VAT £164.99 ex VAT
  • EuroCupGT Porsche Boxster 986 Rear Strut Brace Carbon Fibre 1997-2012

    SKU:12708

    In Stock In Stock
    £137.49
  • EuroCupGT Rear Adjustable Tension Control Arm Porsche 986 987 Boxster Cayman -12

    SKU:EURO6435BOX

    In Stock In Stock
    EuroCupGT uprated rear suspension tension bars replace the cast aluminium arms & allow for neutral adjustment when setting up your cars geometry. The rubber bushing is replaced with a rose joint to allow for more accurate handling. Fits the following: All Boxster 1997 -2012 All Cayman Models 2005 -2012
    £329.99 inc VAT £274.99 ex VAT
  • EuroCupGT-Pro Bilstein Coil-Over Spring Seat & Locking Ring 2 1/2" 63mm (1)

    SKU:18940

    Out of Stock Out of Stock
    2 1/2-INCH (63MM) LOWER SPRING SEAT PLATFORM or LOCKING RING. For Bilstein & EuroCupGT-Pro Coil Over Kits. Manufactured from HE30 Aluminium, for use supporting the spring coil over. These are one of the most popular parts in our suspension range, this adapter is lightweight and has been developed specially for maximum strength and control. Sold Each (1)
    £26.39 inc VAT £21.99 ex VAT
  • EuroCupGT-Pro C Spanner for 2 1/2" 63mm for Porsche Bilstein Suspension Rings

    SKU:18947

    In Stock In Stock
    2 1/2-INCH (63MM) PRECISION C SPANNER FOR All Porsche Bilstein Koni & EuroCupGT Suspension. The Pro C spanner is for the ease of adjusting on the ride height of your Porsche without damaging the aluminium platforms and locking rings. This is a drop forged professional spanner.
    £22.00 inc VAT £18.33 ex VAT
  • EuroCupGT-Pro C Spanner for 2 1/4" 57mm for Porsche & Bilstein Suspension Rings

    SKU:18948

    In Stock In Stock
    2 1/4-INCH (57MM) PRECISION C SPANNER FOR All Porsche Bilstein Koni & EuroCupGT Suspension. The Pro C spanner is for the ease of adjusting on the ride height of your Porsche without damaging the aluminium platforms and locking rings. This is a drop forged professional spanner.
    £19.79 inc VAT £16.49 ex VAT
  • EuroCupGT-Pro Coil-Over Assister Spring Seat Retainer Ring 2 1/2" 63mm (1)

    SKU:18943

    In Stock In Stock
    2 1/2-INCH (63MM) HELPER SPRING PLATFORM. The 2 1/2" Double Helper Adaptor manufactured from HE30 Aluminium, for use when fitting helper spring. These are part of the EuroCupGT-Pro suspension range, but can be used on all 2 1/2" 63mm Spring Setups inc Bilstein & Koni etc. This adapter is lightweight and has been developed specially for maximum strength and control. ( Sold Each )
    £39.59 inc VAT £32.99 ex VAT
  • EuroCupGT-Pro Coil-Over Assister Spring Seat Retainer Ring 2 1/4" 57mm (1)

    SKU:18942

    In Stock In Stock
    2 1/4-INCH (57MM) HELPER SPRING PLATFORM. The 2 1/4" Double Helper Adaptor manufactured from HE30 Aluminium, for use when fitting helper spring. These are part of the EuroCupGT-Pro suspension range, but can be used on all 2 1/4" 57mm Spring Setups inc Bilstein & Koni etc. This adapter is lightweight and has been developed specially for maximum strength and control. ( Sold Each )
    £39.59 inc VAT £32.99 ex VAT
  • EuroCupGT-Pro Front Coil Over Universal Conversion Kit All Models (One Axle Pair

    SKU:18936

    Out of Stock Out of Stock
    Designed to fit over your standard Front Damper Cases, this kit allows the use of 2 1/2" (63mm ID) Motorsport Springs. These Spring Conversion kits are ideal for Bilstein & Koni applications. Manufactured from HE30 Aluminium, this spring conversion kit gives you the option to adjust the ride height & corner Weights of your Porsche very effectively. These are lightweight and have been developed specially for maximum strength and control. Note. On most models you will need to have the Standard spring seats removed to allow for clearance over the damper tube. Can Be used on Front or Rear Applications as required.
    £164.99 inc VAT £137.49 ex VAT
  • EuroCupGT-Pro Front GT3 Type Coil-Over Spring Top Hats 2 1/2" 63mm All Models (2

    SKU:18938

    In Stock In Stock
    These 2 1/2-INCH (63MM) Top Spring Retainers come with a a 10mm pilot hole which can be drilled if needed to 12mm or 14mm or as required. Ideal for Bilstein & Koni or GT3 applications. Manufactured from HE30 Aluminium, for use supporting spring coil-over. These are one of the popular parts in our suspension range, thes retainers are lightweight and have been developed specially for maximum strength and control.
    £65.99 inc VAT £54.99 ex VAT
  • EuroCupGT-Pro GT3 Adjustable Front Top Mounts Porsche 996 997 Boxster & Cayman

    SKU:18933

    In Stock In Stock
    EuroCupGT-Pro GT3 & GT3RS Adjustable Camber Front Top mountings, these Billet Front mounts are Ideal for Fast Road, Track Day & Race & Rally cars. Can be fitted with Standard or Coil-Over Suspension Kits. ( Sold as a Pair ) Note. Bilstien B9 & Other aftermarket Coil Over kits do not come with any Top Mounts.
    £395.99 inc VAT £329.99 ex VAT
  • EuroCupGT-Pro Rear Coil Over Universal Conversion Kit All Models (One Axle Pair)

    SKU:18937

    Out of Stock Out of Stock
    Designed to fit over your standard Rear Damper Cases, this kit allows the use of 2 1/4" (57mm ID) Motorsport Springs. These Spring Conversion kits are ideal for Bilstein & Koni applications. Manufactured from HE30 Aluminium, this spring conversion kit gives you the option to adjust the ride height & corner Weights of your Porsche very effectively. These are lightweight and have been developed specially for maximum strength and control. Note. On most models you will need to have the Standard spring seats removed to allow for clearance over the damper tube. Can Be used on Front or Rear Applications as required.
    £171.59 inc VAT £142.99 ex VAT
  • EuroCupGT-Pro Rear GT3 Type Coil-Over Spring Top Hats 2 1/4" 57mm All Models (2)

    SKU:18939

    In Stock In Stock
    These 2 1/4-INCH (57MM) Top Spring Retainers come with a a 10mm pilot hole which can be drilled if needed to 12mm or 14mm or as required. Ideal for Bilstein & Koni or GT3 applications. Manufactured from HE30 Aluminium, for use supporting spring coil-over. These are one of the popular parts in our suspension range, thes retainers are lightweight and have been developed specially for maximum strength and control.
    £65.99 inc VAT £54.99 ex VAT
  • EuroCupGT-Pro Rear Type Coil-Over Spring Seat & Locking Ring 2 1/4" 57mm (1)

    SKU:18941

    Out of Stock Out of Stock
    2 1/4-INCH (57MM) LOWER SPRING SEAT PLATFORM or LOCKING RING. For EuroCupGT-Pro Coil Over Kits. Manufactured from HE30 Aluminium, for use supporting the spring coil over. These are one of the most popular parts in our suspension range, this adapter is lightweight and has been developed specially for maximum strength and control. Sold Each (1)
    £26.39 inc VAT £21.99 ex VAT
  • EuroCupGTBillet Front Chassis Strength Plates Porsche 996 997 Boxster & Cayman

    SKU:18935

    In Stock In Stock
    These EuroCupGT-Pro GT3 Billet Plates add Strength to the factory Wing Panel & can be used with Standard or Motorsport Top Mounts. ( Sold as a Pair ) Fits All Standard GT2 & GT3 / RS Models 1997 -2012 Also Any car using Porsche Stomski or EuroCupGT-Pro Top Mounts.
    £65.99 inc VAT £54.99 ex VAT
  • Front Anti Roll Bar Bush for 997 Turbo GT3 & X51 Carrera 2005-2012

    SKU:997.343.792.00

    In Stock In Stock
    £16.49 inc VAT £13.74 ex VAT
  • Front Fork Arm Subframe to Wishbone Porsche 996 Carrera Turbo GT3 Boxster 997GT3

    SKU:5853

    In Stock In Stock
    OEM Front Fork Arm All Models 1997-2004. Also Used on 997 GT3 GT3RS & GT2. And With GT3 Coffin Arms on later Carrera Boxster & Cayman 987 Models
    £109.98 inc VAT £91.65 ex VAT
  • GT3 Adjustable Front Anti Roll Bar Porsche 997 C2 C4 Turbo Boxster Cayman 2005-

    SKU:997GT3BAR

    Out of Stock Out of Stock
    OEM, fully adjustable with four positions available, & optimum performance, the factory GT3 swaybar is light weight hollow 26.8mm OD sway bars are half the weight of a solid bar with the same stiffness. Fits Boxster Cayman & All 997 models. (Includes Bushes)
    £412.49 inc VAT £343.74 ex VAT
  • GT3 Split Wishbone Ball Joint Front & Rear 1999-2012 GT3RS Cup & RSR

    SKU:1986

    Out of Stock Out of Stock
    OEM Wishbone Coffin Arm Front & Rear Applications. For All GT2 / GT3 RS. Also Motorsport Applications; on Boxster 996 & 997. Note. Handed so please denote Left or Right on ordering.
    £549.99
  • GT3 Wishbone complete OEM Fits All Models 1997-2012 Sold Each (1)

    SKU:18809

    In Stock In Stock
    OEM Adjustable Wishbone Coffin Arm Complete. Price is for one (1) complete Arm.
    £769.99
  • GT3 Wishbone Pivot Joint for Wishbone Ball Joint ( Fits Front & Rear ) 1997-2012

    SKU:18389

    In Stock In Stock
    OEM Inner Part Only. Fits all models Front & Rear. Sold Each (1) INNER   PART   ONLY Note. dose not include the main arm in picture. ( shown for reference only )
    £219.99
  • H&R Anti Roll (Sway) Bars Front & Rear Porsche 987 Boxster & Cayman 2005-2012

    SKU:5537

    Out of Stock Out of Stock
    Front 24mm & Rear 22mm Diameter , Reduces Body Roll, Increases lateral stiffness, Improves handling. An exact fit & incomparable performance in every application. Heat-treated & shot-peened for increased hardness & life, Powder coated. Comes with Teflon composite bushings
    £479.99 inc VAT £399.99 ex VAT
  • H&R Lowering Spring Kit 25-30mm All Porsche Boxster & Boxster S Models

    SKU:4029

    In Stock In Stock
    Lowers car by 25-30mm Set of 4
    £329.99 inc VAT £274.99 ex VAT
  • H&R M030 Performance Lowering Spring Kit -10mm All 2005-2012

    SKU:18203

    In Stock In Stock
    OEM Quality German made Lowering spring set of 4 springs 10-15mm ( Similar to M030 ride height)
    £329.99 inc VAT £274.99 ex VAT
  • Lower Wishbone Control Arm Adjusting Shim 10mm GT3 / RS Coffin Arm 1997-On

    SKU:996.341.543.95

    In Stock In Stock
    £43.99
  • Lower Wishbone Control Arm Adjusting Shim 1mm GT3 / RS Coffin Arm 1997-On

    SKU:996.341.543.90

    In Stock In Stock
    £10.99
  • Lower Wishbone Control Arm Adjusting Shim 2mm GT3 / RS Coffin Arm 1997-On

    SKU:996.341.543.33

    In Stock In Stock
    £16.49
  • Lower Wishbone Control Arm Adjusting Shim 3mm GT3 / RS Coffin Arm 1997-On

    SKU:996.341.543.92

    In Stock In Stock
    £27.49
  • Lower Wishbone Control Arm Adjusting Shim 5mm GT3 / RS Coffin Arm 1997-On

    SKU:996.341.543.99

    In Stock In Stock
    £32.99
  • Lower Wishbone Control Arm Adjusting Shim 7mm GT3 / RS Coffin Arm 1997-On

    SKU:996.341.543.93

    In Stock In Stock
    £65.99
  • Porsche Boxster Rear Motorsport Monoball Top Mounts (Flat Type) 1997-2012 (Pair)

    SKU:18902

    In Stock In Stock
    Similar to the GT3 Cup & RSR Race mountings, these Billet Rear mounts are Ideal for Fast Road, Track & Race cars. Can be fitted with Standard or Coil-Over Kits. Note. Bilstien B9 & Other aftermarket Coil Over kits do not come with Top Mounts.
    £329.99 inc VAT £274.99 ex VAT
  • Rear Adjustable Toe Link Kit Porsche 996 997 & 986 987 981 Boxster & Cayman

    SKU:7632

    In Stock In Stock
    EuroCupGT rear adjustable toe links arms adjusts camber & dials in the toe for the rear. These adjustable toe links are design to give you a more responsive rear end along with the ability to dial in the toe on the rear end more precisely. These do both Toe and vertical compliance for parallel arms. Fits; All 996 models inc GT3 & Turbo All 997 Models Inc GT3 & Turbo All Boxster 986 987 981 & 718 Models All Cayman 987 981 & 718 Models
    £329.99 inc VAT £274.99 ex VAT
  • Rear Toe Link Bolts All Models 1997-2012

    SKU:997.331.217.02

    In Stock In Stock
    For Rear Suspension Toe / Track Arm. All Models inc Turbo & GT3
    £16.49 inc VAT £13.74 ex VAT
  • Rear Track Control Arm Toe Link Poly Bush Kit (2) All Models 1997-2012

    SKU:18797

    Out of Stock Out of Stock
    Complete kit for both sides. Improves set ups no end.
    £65.99 inc VAT £54.99 ex VAT
  • Spring Caps All Coil Over Applications & Billet Top Mounts & Bilstein B9 (pair)

    SKU:17128

    In Stock In Stock
    On applications using Adjustable Camber Plates Front & Rear. With spring ID of 62mm 2 1/4" using Spring Top Hats. Sold as a set of two. For all Spax & Bilstein B9 & B12 for 964 993 996 & 977 Turbo, GT3, RS. 924/944/968 M030. Boxster & Cayman R / GT4 etc
    £131.99 inc VAT £109.99 ex VAT
  • Stomski Racing Front Top Mounts Porsche 996 997 Boxster & Cayman 1997-2012 (x2)

    SKU:SR121

    In Stock In Stock
    Factory rubber Front shock mounts deflect under load and distort suspension settings, leading to poor tire wear, poor grip, poor handling, and slower laps times. STOMSKI RACING's Front Camber Plates ensure that your tyre investment is optimised, providing for the best grip, the best handling, and the fastest lap times. CNC machined from aircraft quality Billet Alloy and anodized for great looks and protection, Front Camber Plates deliver maximum range, the most precise tuning, the smoothest suspension travel, the easiest and the most accurate adjustment for your car. Include the finest quality aerospace monoballs as well as stainless steel hardware. Available with stainless steel bushings. Sold Per Pair Fits 986 / 987 Boxster, S, Cayman,S, 996 & 997 Carrera, S, Turbo & GT3
    £479.99 inc VAT £399.99 ex VAT
  • Stomski Racing Rear Control Arm & Rear Toe Arm Lock Out Plate Kit. All Models

    SKU:SR084

    In Stock In Stock
    These precision machined stainless steel RSR Spec plates provide a sure lock to eliminating unwanted camber changes caused by the factory eccentric moving under load. By bolting these plates to the chassis on the inboard end of the Rear control arm ( Coffin Arm ) or on the inboard end of the Rear Toe Arm ( Rear Toe ), the control arms will now be held in a constant, fixed position. Ideal when using RSR Spec adjustable Control arms. Fits all Models; 996, 997, Boxster, and Cayman 1997 to 2012
    £109.98 inc VAT £91.65 ex VAT
  • Stomski Racing RSR Spec Rear Toe Control Arm Kit. All Models. 1997 to 2012

    SKU:SR082

    In Stock In Stock
    Precision alignment and Anti bump steer set up are critical for good handling, these RSR spec Rear Toe Control Arms are fabricated to exacting tolerances and standards, provide the premier upgrade for your track or street car. Using aerospace quality rod ends and components to provide for the most durable, accurate part available. With a left and right hand double adjuster the RSR toe link allows for extremely precise and infinite adjustment to fine tune suspension settings. Also included are seals to protect the monoballs in exposed environment. Sold p/pair Fits all Models; 996, 997, Boxster, and Cayman 1997 to 2012 (pair)
    £659.99 inc VAT £549.99 ex VAT