Porsche 911 Suspension 1963 to 1989

Porsche 911 - Suspension - 1963 to 1989
Porsche 911 Suspension 1963 to 1989
Porsche 911 - Suspension - 1963 to 1989
Set Descending Direction
View as Grid List

47 Items

per page
  1. US$159.17 US$132.64

    Quantity

  2. 911 R / ST / RS / RSR Rear shock tower support brackets 1965-1989 (Two pairs)
    SKU: ST911R-Rear shock tower brackets
    In Stock
    911 R / ST / RS / RSR Rear shock tower support brackets ready to weld on to the Rear shock towers. Made from an original pattern but contoured for better fitment. Each set will need a slight tweek to match the location as all early 911's are hand made so no two cars are the same. Set comes as 4 parts (Two pairs / 1 car)
    US$111.41 US$92.84

    Quantity

  3. Cotter Pin Front Ball Joint to suspension Leg 911 912 914 & 930 Turbo 1969-1989
    SKU: 2839
    In Stock
    OEM Pin. Secures lower ball joint to suspension leg. Sold Each (1) Two per car
    US$33.14 US$27.62

    Quantity

  4. Front Anti Roll Bar Bush inner Clamp All 911 912 & 930 Turbo 1969-1989
    SKU: 911.343.775.00
    To Order By Request (5+ days)
    OEM Porsche bracket on front Subframe. All Models
    US$15.90 US$13.25

    Quantity

  5. Front Koni Classic Shock Absorbers for Koni Cases 1969-1977
    SKU: 2622
    To Order By Request (5+ days)
    Front Koni Classic Red insert to fit Porsche 911 (G series) including Carrera RS
    US$265.28 US$221.07

    Quantity

  6. Front Lower Ball Joint 911 912 & 914 1969-1971 Only
    SKU: 11995
    In Stock
    For Early Long Wheel Base 2.0L & 2.2L cars only
    US$59.68 US$49.73

    Quantity

  7. US$63.66 US$53.05

    Quantity

  8. Front Lower Wishbone A Arm Left Side All 911 912 & 930 Turbo 1974-1989
    SKU: 5058
    To Order By Request (5+ days)
    OEM Quality Left Side
    US$318.35 US$265.29

    Quantity

  9. Front Lower Wishbone A Arm Right Side All 911 912 & 930 Turbo 1974-1989
    SKU: 00827
    To Order By Request (5+ days)
    OEM Quality Right Side
    US$318.35 US$265.29

    Quantity

  10. Front Suspension Damper Shroud for All 911 912 & 930 Turbo 1965-1989
    SKU: 19010
    To Order By Request (5+ days)
    OEM Porsche part
    US$99.47 US$82.89

    Quantity

  11. Front Suspension Top Mount All 911 912 & 930 Turbo 1969-1989 ( Not Handed )
    SKU: 911.341.018.00
    In Stock
    OEM German Front Top Mount ( Not Handed )
    US$159.17 US$132.64

    Quantity

  12. Front Torsion Bar
    SKU: 5056
    To Order By Request (5+ days)
    US$271.40 US$226.17

    Quantity

  13. Front Wishbone Bush ( Front ) 911 912 & 914 1965-1969 ( Short Wheel Base )
    SKU: 18480
    In Stock
    Only for really Early cars pre 1970
    US$23.86 US$19.88

    Quantity

  14. Koni Sport Adjustable Rear Shocks ( Yellow ) All Models 1973-1989 (Pair)
    SKU: 18525
    In Stock
    Fully Adjustable Rear Kit. Ideal for Fast Road & Motorsport use. ( Pair )
    US$663.24 US$552.70

    Quantity

  15. Koni Top Adjustable Sports Shocks for Boge Cases 911 & 930 Turbo 1973-1989 (2)
    SKU: 18526
    In Stock
    Sports Top Adjustable Front Inserts Kit for ( Black ) Boge Cases. Ideal for Fast Road & Motorsport applications. Pair (2) All cars 1974 -Onwasrds with Boge Legs
    US$530.59 US$442.16

    Quantity

  16. M10 Flang Nut For Suspension All Models 1965-Onwards
    SKU: 999.076.053.01
    In Stock
    OEM Porsche Flange Nut For All Suspension, Engine, Chassis & Gearbox applications
    US$3.17 US$2.64

    Quantity

  17. OEM Bilstein Green Front Leg (Complete) 1972-1989
    SKU: 00826
    To Order By Request (5+ days)
    OEM Replacement full leg unit. Note. Please specify Year & Model when ordering.
    US$1,114.10 US$928.42

    Quantity

  18. OEM Bilstein Green Front Legs All 911 SC Super Sport & 930 Turbo 1972-1989 (Pair)
    SKU: 5055
    In Stock
    Complete replacement OEM Front Leg Set of two (2) units to update or replace worn units. Ideal as a Bolt on Direct replacement on all 911 & 930 Turbo models, or use for Fast Road, Historic Motorsports or classic restoration. 1972 -1989
    US$2,221.86 US$1,851.55

    Quantity

  19. OEM Bilstein Rear Shock Absorber Unit for All 911 & 930 Turbo models 1972-1989
    SKU: 2628
    In Stock
    OEM on most 930 Turbo's 911SC Sport & Carrera Super Sport Models. Ideal upgrade for all cars. 25% stiffer than your Black Boge Units. Fits All Models 1972 -1989. Sold Each ( Not Handed )
    US$238.75 US$198.96

    Quantity

  20. OEM Front Bilstein Front Insert for Black Boge Cases 1969-1989 ( Each )
    SKU: 2599
    In Stock
    Complete OEM Bilstein Insert for Black Boge Cases to turn standard front legs into Sports Model Dampers. Sold Each ( 2 per car )
    US$238.75 US$198.96

    Quantity

  21. OEM Front Damper for Boge Case All 911 & 930 Turbo 1986-1898 ( For Black Cases )
    SKU: 2621
    In Stock
    OEM Damper For All 911 models with Black Outer Case. Direct replacement Sealed Unit.
    US$238.75 US$198.96

    Quantity

  22. OEM Front Damper for Boge Case All 911 1969-1985 ( For Black Cases )
    SKU: 2620
    In Stock
    OEM Damper For All 911 models with Black Outer Case. Direct replacement Sealed Unit.
    US$198.96 US$165.80

    Quantity

  23. OEM Front Shock Insert All Green Bilstein 911/ SC Sport & 930 Turbo 1974-1989
    SKU: 2619
    To Order By Request (5+ days)
    OEM on all 911 SC Sport / Carrera Super Sport & Turbo models. Direct replacement sealed High Pressure Gas insert for all Green front suspension Cases. Sold Each ( Not Handed )
    US$318.35 US$265.29

    Quantity

  24. Polyurethane Front Wishbone Bush 911& 930 Turbo 1969-1989 (Pack of 4)
    SKU: 2138
    In Stock
    Polyurethane front wishbone bush to fit models 911 up to 1989. Price per set of 4 bushes.
    US$99.47 US$82.89

    Quantity

  25. Rear Anti-Roll Mount on Body ( Weld On ) 911 & 930 Turbo 1965-1989 (not handed)
    SKU: 911.501.983.00
    In Stock
    For All Models 1965 to 1989 inc Turbo. Often corrodes causing MOT Failure
    US$99.47 US$82.89

    Quantity

  26. Rear Boge Classic Orange Shock Absorber 1965-1973 ( Each )
    SKU: 2630
    In Stock
    Direct Replacement Rear Classic Red to fit Porsche 911 including 912 1965 to 1973 OEM fitment On Early Models
    US$265.28 US$221.07

    Quantity

  27. Rear inner Trailing Arm Bush Kit All 911 & 930 Turbo 1969-1989 (pair)
    SKU: 5057
    In Stock
    OEM Ouality 2x Bushes for one (1) rear arm. Note. Two kits needed per car
    US$66.31 US$55.26

    Quantity

  28. Rear Shock Absorber Boge -89
    SKU: 2629
    To Order By Request (5+ days)
    US$175.03 US$145.86

    Quantity

  29. Rear Torsion Bar Main Cover 911 912 & 930 Turbo 1965-1989 ( Not Handed )
    SKU: 1568
    In Stock
    OEM Galvanised Plate Against inner wing & spring plate 4 holes
    US$63.66 US$53.05

    Quantity

  30. Rear Torsion Bar
    SKU: 2639
    To Order By Request (5+ days)
    As low as US$393.97 US$328.31
  31. RSR/ST Adjustable Torsion Bar Spring Plates 911 & 912 Short Wheelbase 1965-1968
    SKU: 19665
    To Order By Request (5+ days)
    These High quality Galvanised Spring Plates replicate the classic Factory Race car Setup used on the IROC & LeMans/ IMSA cars of the era . Direct replacement Bolt On fit for All Short Wheel Base 911 / 912 models 1965 -1968 Only. Gives simple adjustment for ride height and Suspension setups. Sold as a Set (2) Note. Not for Later cars from 1969-1989. Please see other listing in this section.
    US$795.89 US$663.24

    Quantity

  32. RSR/ST Adjustable Torsion Bar Spring Plates 911 G50 1987-1989 & Turbo 1989 Only
    SKU: 19663
    To Order By Request (5+ days)
    These High quality Galvanised Spring Plates replicate the classic Factory Race car Setup used on the IROC & LeMans/ IMSA cars of that era . Direct replacement Bolt On fit for Later G50 911's 1987-Onwards & 930 Turbo 1989 Only. Simple adjustment for ride height and Suspension setups. Sold as a Set (2) Note. For Earlier 911 912 & 930 Turbo Models Please see other listing in this section.
    US$795.89 US$663.24

    Quantity

  33. RSR/ST Adjustable Torsion Bar Spring Plates All 1969-1986 & 930 Turbo Upto-1988
    SKU: 19662
    In Stock
    These High quality Galvanised Spring Plates replicate the classic Factory Race car Setup used on the IROC & LeMans/ IMSA cars of the era . Direct replacement Bolt On fit for All 911 / 912 & 930 Turbo models 1969-Onwards. Gives simple adjustment for ride height and Suspension setups. Sold as a Set (2) Note. Not for Later G50 Gearbox cars from 1987 -1989. Please see other listing in this section.
    US$795.89 US$663.24

    Quantity

  34. Spax 911 / 912 Front Damper Inserts for Black Boge Strut 1969-1973 (pair)
    SKU: 7507
    To Order By Request (5+ days)
    For 911 Models 1969 to 1973.Can be adjusted for stiffness, Controling stiffness allows you to alter the suspension set up to suit your style of driving.
    US$397.93 US$331.61

    Quantity

  35. Spax Adjustable Rear Shock Absorber 911 1974-1989 ( sold per Pair)
    SKU: 7516
    To Order By Request (5+ days)
    For 911 Models 1969 to 1989 .Can be adjusted for stiffness, with no dismantling. Controling stiffness, allows you to alter the suspension set up to suit your style of driving. Note. Please use Vehicle Year & Model Drop Downs when checking out.
    US$397.93 US$331.61

    Quantity

  36. Spax Adjustable Rear Shock Absorber All Classic 911 & 912 1965-1973 ( per Pair)
    SKU: 7523
    In Stock
    For 911 Models 1968-1975. Can be adjusted for stiffness, with no dismantling. Controling stiffness, allows you to alter the suspension set up to suit your style of driving. Note. Please use Vehicle Year & Model Drop Downs when checking out.
    US$397.93 US$331.61

    Quantity

  37. Spax Front Damper Inserts for Black Boge Strut 911 & 930 Turbo 1974-1989 (pair)
    SKU: 7508
    To Order By Request (5+ days)
    For All 911 & 930 Turbo Models using the Black Boge Struts. 1974 to 1989 . Can be adjusted for stiffness, Controling stiffness allows you to alter the suspension set up to suit your style of driving.
    US$397.93 US$331.61

    Quantity

  38. Steering Column Support Needle Roller Bearing & Bush All Models 1965-1989
    SKU: 911.347.029.00
    In Stock
    OEM Steering Column Bush with Bearing ( Complete )
    US$111.41 US$92.84

    Quantity

  39. Stomski Racing RSR Rear Suspension Monoball Inner Arm Bush Kit 1965 to 1989
    SKU: SR018
    In Stock
    Now your suspension settings on the rear of your 911 can be set with greater ease and stay true and accurate. These monoballs and cartridges replace the worn, imprecise factory rubber bushings on 911 1965 through to 1989. Precisely machined from stainless steel and 6061 aluminium with the finest aerospace monoballs available. 1 Side per kit. ( x2 required for an Axle / Car )
    US$318.35 US$265.29

    Quantity

  40. Uprated 21mm RSR/ST Front Torsion Bars All 911 & 912 & 930 Turbo 1965-1989
    SKU: 19669
    To Order By Request (5+ days)
    +2mm Diameter Larger than Standard
    US$530.58 US$442.15

    Quantity

  41. Uprated 23mm RSR/ST Front Torsion Bars All 911 & 912 & 930 Turbo 1965-1989
    SKU: 19670
    To Order By Request (5+ days)
    +4mm Diameter Larger than Standard
    US$530.58 US$442.15

    Quantity

  42. Uprated 26mm RSR/ST Rear Torsion Bars 911 & 912 1965-1986 & 930 Turbo Upto 1988
    SKU: 19668
    To Order By Request (5+ days)
    Uprated Rear Torsion Bars for All None G50 Cars 1965 -Onwards
    US$636.71 US$530.59

    Quantity

  43. Uprated 28mm RSR/ST Rear Torsion Bars 911 & 912 1965-1986 & 930 Turbo Upto 1988
    SKU: 19667
    To Order By Request (5+ days)
    Uprated Rear Torsion Bars for All None G50 Cars 1965 -Onwards
    US$636.71 US$530.59

    Quantity

  44. Uprated 30mm RSR/ST Rear Torsion Bars 911 & 912 1965-1986 & 930 Turbo Upto 1988
    SKU: 19664
    To Order By Request (5+ days)
    Uprated Rear Torsion Bars for All None G50 Cars 1965 -Onwards
    US$636.71 US$530.59

    Quantity

  45. Uprated 30mm RSR/ST Rear Torsion Bars 911 G50 1987-1989 & 930 Turbo 1989 Only
    SKU: 19666
    In Stock
    Uprated Rear Torsion Bars for All G50 Cars 1987-Onwards
    US$636.71 US$530.59

    Quantity

Loading ...
Load More ...
Set Descending Direction
View as Grid List

47 Items

per page