You have no items in your shopping cart.
Porsche 911 Suspension & Steering Upgrades 1963 to 1989
Porsche 911 - Suspension & Steering Upgrades - 1963 to 1989
-
911 R / ST / RS / RSR Front Strut brace brackets inc bolts & spacers 1965-1989
SKU:ST911R-Front Strut brace brackets
In Stock -
911 R / ST / RS / RSR Rear shock tower support brackets 1965-1989 (Two pairs)
SKU:ST911R-Rear shock tower brackets
In Stock911 R / ST / RS / RSR Rear shock tower support brackets ready to weld on to the Rear shock towers. Made from an original pattern but contoured for better fitment. Each set will need a slight tweek to match the location as all early 911's are hand made so no two cars are the same. Set comes as 4 parts (Two pairs / 1 car) -
-
Adjustable Anti Roll Bar Drop Link Kit Rear All Models 1978-Onwards ( Pair )
SKU:19450
In StockIdeal for All Standard. H&R and AP Roll bars where added compliance is required on setup. -
Cotter Pin Front Ball Joint to suspension Leg 911 912 914 & 930 Turbo 1969-1989
SKU:2839
In StockOEM Pin. Secures lower ball joint to suspension leg. Sold Each (1) Two per car -
EuroCupGT-Pro Bilstein Coil-Over Spring Seat & Locking Ring 2 1/2" 63mm (1)
SKU:18940
Out of Stock2 1/2-INCH (63MM) LOWER SPRING SEAT PLATFORM or LOCKING RING. For Bilstein & EuroCupGT-Pro Coil Over Kits. Manufactured from HE30 Aluminium, for use supporting the spring coil over. These are one of the most popular parts in our suspension range, this adapter is lightweight and has been developed specially for maximum strength and control. Sold Each (1) -
EuroCupGT-Pro C Spanner for 2 1/2" 63mm for Porsche Bilstein Suspension Rings
SKU:18947
In Stock2 1/2-INCH (63MM) PRECISION C SPANNER FOR All Porsche Bilstein Koni & EuroCupGT Suspension. The Pro C spanner is for the ease of adjusting on the ride height of your Porsche without damaging the aluminium platforms and locking rings. This is a drop forged professional spanner. -
EuroCupGT-Pro C Spanner for 2 1/4" 57mm for Porsche & Bilstein Suspension Rings
SKU:18948
In Stock2 1/4-INCH (57MM) PRECISION C SPANNER FOR All Porsche Bilstein Koni & EuroCupGT Suspension. The Pro C spanner is for the ease of adjusting on the ride height of your Porsche without damaging the aluminium platforms and locking rings. This is a drop forged professional spanner. -
EuroCupGT-Pro Coil-Over Assister Spring Seat Retainer Ring 2 1/2" 63mm (1)
SKU:18943
In Stock2 1/2-INCH (63MM) HELPER SPRING PLATFORM. The 2 1/2" Double Helper Adaptor manufactured from HE30 Aluminium, for use when fitting helper spring. These are part of the EuroCupGT-Pro suspension range, but can be used on all 2 1/2" 63mm Spring Setups inc Bilstein & Koni etc. This adapter is lightweight and has been developed specially for maximum strength and control. ( Sold Each ) -
EuroCupGT-Pro Coil-Over Assister Spring Seat Retainer Ring 2 1/4" 57mm (1)
SKU:18942
In Stock2 1/4-INCH (57MM) HELPER SPRING PLATFORM. The 2 1/4" Double Helper Adaptor manufactured from HE30 Aluminium, for use when fitting helper spring. These are part of the EuroCupGT-Pro suspension range, but can be used on all 2 1/4" 57mm Spring Setups inc Bilstein & Koni etc. This adapter is lightweight and has been developed specially for maximum strength and control. ( Sold Each ) -
EuroCupGT-Pro Front Coil Over Universal Conversion Kit All Models (One Axle Pair
SKU:18936
Out of StockDesigned to fit over your standard Front Damper Cases, this kit allows the use of 2 1/2" (63mm ID) Motorsport Springs. These Spring Conversion kits are ideal for Bilstein & Koni applications. Manufactured from HE30 Aluminium, this spring conversion kit gives you the option to adjust the ride height & corner Weights of your Porsche very effectively. These are lightweight and have been developed specially for maximum strength and control. Note. On most models you will need to have the Standard spring seats removed to allow for clearance over the damper tube. Can Be used on Front or Rear Applications as required. -
EuroCupGT-Pro Front GT3 Type Coil-Over Spring Top Hats 2 1/2" 63mm All Models (2
SKU:18938
In StockThese 2 1/2-INCH (63MM) Top Spring Retainers come with a a 10mm pilot hole which can be drilled if needed to 12mm or 14mm or as required. Ideal for Bilstein & Koni or GT3 applications. Manufactured from HE30 Aluminium, for use supporting spring coil-over. These are one of the popular parts in our suspension range, thes retainers are lightweight and have been developed specially for maximum strength and control. -
EuroCupGT-Pro Rear Coil Over Universal Conversion Kit All Models (One Axle Pair)
SKU:18937
Out of StockDesigned to fit over your standard Rear Damper Cases, this kit allows the use of 2 1/4" (57mm ID) Motorsport Springs. These Spring Conversion kits are ideal for Bilstein & Koni applications. Manufactured from HE30 Aluminium, this spring conversion kit gives you the option to adjust the ride height & corner Weights of your Porsche very effectively. These are lightweight and have been developed specially for maximum strength and control. Note. On most models you will need to have the Standard spring seats removed to allow for clearance over the damper tube. Can Be used on Front or Rear Applications as required. -
EuroCupGT-Pro Rear GT3 Type Coil-Over Spring Top Hats 2 1/4" 57mm All Models (2)
SKU:18939
In StockThese 2 1/4-INCH (57MM) Top Spring Retainers come with a a 10mm pilot hole which can be drilled if needed to 12mm or 14mm or as required. Ideal for Bilstein & Koni or GT3 applications. Manufactured from HE30 Aluminium, for use supporting spring coil-over. These are one of the popular parts in our suspension range, thes retainers are lightweight and have been developed specially for maximum strength and control. -
EuroCupGT-Pro Rear Type Coil-Over Spring Seat & Locking Ring 2 1/4" 57mm (1)
SKU:18941
Out of Stock2 1/4-INCH (57MM) LOWER SPRING SEAT PLATFORM or LOCKING RING. For EuroCupGT-Pro Coil Over Kits. Manufactured from HE30 Aluminium, for use supporting the spring coil over. These are one of the most popular parts in our suspension range, this adapter is lightweight and has been developed specially for maximum strength and control. Sold Each (1) -
Front Anti Roll Bar Bush inner Clamp All 911 912 & 930 Turbo 1969-1989
SKU:911.343.775.00
Out of StockOEM Porsche bracket on front Subframe. All Models -
Front Shock Insert OEM Green Bilstein 911/ SC / Sport & 930 Turbo 1974-1989
SKU:2619
In StockOEM on all 911 SC Sport / Carrera Super Sport & Turbo models. Direct replacement sealed High Pressure Gas insert for all Green front suspension Cases. Sold Each ( Not Handed ) -
Front Suspension Damper Shroud for All 911 912 & 930 Turbo 1965-1989
SKU:19010
Out of StockOEM Porsche part -
Front Suspension Top Mount All 911 912 & 930 Turbo 1969-1989 ( Not Handed )
SKU:911.341.018.00
In StockOEM German Front Top Mount ( Not Handed ) -
Front Suspension Top Mount Top Washer All 911 912 & 930 Models 1965-1989
SKU:901.341.629.00
In StockOEM Porsche Part ( Not Handed ) -
Gear Linkage Poly Bush Kit (2) 911 / 930 928 & 924 Turbo 1965-1989
SKU:2135
Out of StockImproves Gear selection & reduces play in linkage -
Koni Sport Adjustable Rear Shocks ( Yellow ) All Models 1973-1989 (Pair)
SKU:18525
In StockFully Adjustable Rear Kit. Ideal for Fast Road & Motorsport use. ( Pair ) -
Koni Top Adjustable Sports Shocks for Boge Cases 911 & 930 Turbo 1973-1989 (2)
SKU:18526
In StockSports Top Adjustable Front Inserts Kit for ( Black ) Boge Cases. Ideal for Fast Road & Motorsport applications. Pair (2) All cars 1974 -Onwasrds with Boge Legs -
OEM Bilstein Green Front Legs All 911 SC Super Sport /930 Turbo 1972-1989 (Pair)
SKU:5055
Out of StockComplete replacement OEM Front Leg Set of two (2) units to update or replace worn units. Ideal as a Bolt on Direct replacement on all 911 & 930 Turbo models, or use for Fast Road, Historic Motorsports or classic restoration. 1972 -1989 -
OEM Bilstein Rear Shock Absorber Unit for All 911 & 930 Turbo models 1972-1989
SKU:2628
In StockOEM on most 930 Turbo's 911SC Sport & Carrera Super Sport Models. Ideal upgrade for all cars. 25% stiffer than your Black Boge Units. Fits All Models 1972 -1989. Sold Each ( Not Handed ) -
Poly Front Anti Roll Bar Bush 911 & 930 Turbo 1974-1989 per pair 22mm
SKU:2080
Out of StockPrice per pair -
-
-
-
-
Poly Front Anti Roll Bar Upper Bush Porsche 911 1965-73 p/pair 16mm
SKU:1005
In StockUpper Drop Link Bush for ali early per impact bumper cars -
-
-
-
-
-
-
-
Polyurethane Front Wishbone Bush 911& 930 Turbo 1969-1989 (Pack of 4)
SKU:2138
In StockPolyurethane front wishbone bush to fit models 911 up to 1989. Price per set of 4 bushes. -
Rear Boge Classic Orange Shock Absorber 1965-1973 ( Each )
SKU:2630
In StockDirect Replacement Rear Classic Red to fit Porsche 911 including 912 1965 to 1973 OEM fitment On Early Models -
RSR/ST Adjustable Torsion Bar Spring Plates 911 & 912 Short Wheelbase 1965-1968
SKU:19665
Out of StockThese High quality Galvanised Spring Plates replicate the classic Factory Race car Setup used on the IROC & LeMans/ IMSA cars of the era . Direct replacement Bolt On fit for All Short Wheel Base 911 / 912 models 1965 -1968 Only. Gives simple adjustment for ride height and Suspension setups. Sold as a Set (2) Note. Not for Later cars from 1969-1989. Please see other listing in this section. -
RSR/ST Adjustable Torsion Bar Spring Plates 911 G50 1987-1989 & Turbo 1989 Only
SKU:19663
Out of StockThese High quality Galvanised Spring Plates replicate the classic Factory Race car Setup used on the IROC & LeMans/ IMSA cars of that era . Direct replacement Bolt On fit for Later G50 911's 1987-Onwards & 930 Turbo 1989 Only. Simple adjustment for ride height and Suspension setups. Sold as a Set (2) Note. For Earlier 911 912 & 930 Turbo Models Please see other listing in this section. -
RSR/ST Adjustable Torsion Bar Spring Plates All 1969-1986 & 930 Turbo Upto-1988
SKU:19662
Out of StockThese High quality Galvanised Spring Plates replicate the classic Factory Race car Setup used on the IROC & LeMans/ IMSA cars of the era . Direct replacement Bolt On fit for All 911 / 912 & 930 Turbo models 1969-Onwards. Gives simple adjustment for ride height and Suspension setups. Sold as a Set (2) Note. Not for Later G50 Gearbox cars from 1987 -1989. Please see other listing in this section. -
Spax 911 / 912 Front Damper Inserts for Black Boge Strut 1969-1973 (pair)
SKU:7507
Out of StockFor 911 Models 1969 to 1973.Can be adjusted for stiffness, Controling stiffness allows you to alter the suspension set up to suit your style of driving. -
Spax Adjustable Rear Shock Absorber 911 1974-1989 ( sold per Pair)
SKU:7516
Out of StockFor 911 Models 1969 to 1989 .Can be adjusted for stiffness, with no dismantling. Controling stiffness, allows you to alter the suspension set up to suit your style of driving. Note. Please use Vehicle Year & Model Drop Downs when checking out. -
Spax Adjustable Rear Shock Absorber All Classic 911 & 912 1965-1973 ( per Pair)
SKU:7523
In StockFor 911 Models 1968-1975. Can be adjusted for stiffness, with no dismantling. Controling stiffness, allows you to alter the suspension set up to suit your style of driving. Note. Please use Vehicle Year & Model Drop Downs when checking out. -
Spax Front Damper Inserts for Black Boge Strut 911 & 930 Turbo 1974-1989 (pair)
SKU:7508
Out of StockFor All 911 & 930 Turbo Models using the Black Boge Struts. 1974 to 1989 . Can be adjusted for stiffness, Controling stiffness allows you to alter the suspension set up to suit your style of driving. -
Spring Caps All Coil Over Applications & Billet Top Mounts & Bilstein B9 (pair)
SKU:17128
In StockOn applications using Adjustable Camber Plates Front & Rear. With spring ID of 62mm 2 1/4" using Spring Top Hats. Sold as a set of two. For all Spax & Bilstein B9 & B12 for 964 993 996 & 977 Turbo, GT3, RS. 924/944/968 M030. Boxster & Cayman R / GT4 etc -
Stomski Racing RSR Rear Suspension Monoball Inner Arm Bush Kit 1965 to 1989
SKU:SR018
In StockNow your suspension settings on the rear of your 911 can be set with greater ease and stay true and accurate. These monoballs and cartridges replace the worn, imprecise factory rubber bushings on 911 1965 through to 1989. Precisely machined from stainless steel and 6061 aluminium with the finest aerospace monoballs available. 1 Side per kit. ( x2 required for an Axle / Car ) -
Stomski Racing Track Rod End Bump Steer Kit All 911 912 & 930 Turbo 1965 to 1989
SKU:SR055
Out of StockMade from the highest quality aerospace Teflon lined Track rod ends and hardware, the Stomski Racing bump steer kit will allow for precise adjustment ranging from moderate street lowering to the most aggressive race setup. These kits allow for infinite fine tuning and come complete. No other hardware or parts needed. Includes seals. Fit all 911, 912, and 930 models through 1965 to 1989. -
Uprated 21mm RSR/ST Front Torsion Bars All 911 & 912 & 930 Turbo 1965-1989
SKU:19669
Out of Stock+2mm Diameter Larger than Standard -
Uprated 23mm RSR/ST Front Torsion Bars All 911 & 912 & 930 Turbo 1965-1989
SKU:19670
Out of Stock+4mm Diameter Larger than Standard -
Uprated 26mm RSR/ST Rear Torsion Bars 911 & 912 1965-1986 & 930 Turbo Upto 1988
SKU:19668
Out of StockUprated Rear Torsion Bars for All None G50 Cars 1965 -Onwards -
Uprated 28mm RSR/ST Rear Torsion Bars 911 & 912 1965-1986 & 930 Turbo Upto 1988
SKU:19667
Out of StockUprated Rear Torsion Bars for All None G50 Cars 1965 -Onwards -
Uprated 30mm RSR/ST Rear Torsion Bars 911 & 912 1965-1986 & 930 Turbo Upto 1988
SKU:19664
Out of StockUprated Rear Torsion Bars for All None G50 Cars 1965 -Onwards -
Uprated 30mm RSR/ST Rear Torsion Bars 911 G50 1987-1989 & 930 Turbo 1989 Only
SKU:19666
In StockUprated Rear Torsion Bars for All G50 Cars 1987-Onwards