You have no items in your shopping cart.
Porsche Boxster 986 Chassis Upgrades & Strut Braces 1997 to 2004
Porsche Boxster 986 - Chassis Upgrades & Strut Braces - 1997 to 2004
-
Agency Power Front & Rear Adjustable Anti Roll Bar links (Pair) All Models
SKU:19007
Out of StockImproving upon handling on any car is a must for achieving the best driving results. However, with a mid engine, rear wheel drive cars over & under steer poses a big problem. One of the first steps is upgrading the sway bar links to control this. Fits all Cayman & Boxster models 1998- 2012 996 ( set of 2 / one Axle ) Note; for full car set please order two kits -
Brey Krause Camera Mount Porsche Boxster Brey Krause for Roll bar or cage
SKU:R9011
In StockStainless steel & aluminium camera mount is three axis adjustable to properly position a camera. Strap secures camera to mount. Fits Boxster factory rollbar mounts between factory hoops -
Brey Krause GoPro & Camera Mount for Harness Guide Bar & Roll Cage
SKU:R9010
In StockStainless steel GoPro Camera mount is three axis adjustable to properly position camera. Strap secures camera to mount. Attaches to Roll Cage harness guide bar tubing -
-
-
Centre Radiator kit Porsche 996 Carrera 2 / C4 S & Boxster 1997-2005 OEM GT3
SKU:CENTERRAD996
In StockPorsche Genuine Oem Center Radiator kit for 996 Carrera 2 & C4 and All Boxster 986 models 1997-2005 Comes with pipes & frame work and Duct ( As fitted as standard to the 996 GT3 ). NOTE. On Some Porsche models, some modifications may be needed to the central bumper PU Grill area. This will be your own responsibility to investigate prior to purchasing. Note2. The Picture may NOT represent the exact fittings included. -
EuroCupGT Billet Front Chassis Strength Plates Porsche 996 997 Boxster Cayman
SKU:18934
In StockThese EuroCupGT-Pro Billet Plates add Strength to the factory Wing Panel & can be used with Standard or Motorsport Top Mounts. ( Sold as a Pair ) Fits All Models 1997 -2012 -
EuroCupGT Flush Fitting Lockable Bonnet and Boot Catches
SKU:4987
Out of StockIdeal for track day and racing cars where secure easy access is required. Available as carbon look or plain black. These EuroCup catches fit all models 1965 - 2013. Price per pair -
-
EuroCupGTBillet Front Chassis Strength Plates Porsche 996 997 Boxster & Cayman
SKU:18935
In StockThese EuroCupGT-Pro GT3 Billet Plates add Strength to the factory Wing Panel & can be used with Standard or Motorsport Top Mounts. ( Sold as a Pair ) Fits All Standard GT2 & GT3 / RS Models 1997 -2012 Also Any car using Porsche Stomski or EuroCupGT-Pro Top Mounts. -
Fire Extinguisher Seat Mount Porsche 996 Carrera Turbo GT3 & Boxster1997-2004
SKU:R2020
Out of StockPowder coated in durable black wrinkle-finish. Attaches to factory seat track hardware Under Front Seat -
Front Strut Brace Brey Krause Porsche 996 Carrera Turbo GT3 986 Boxster 1997-04
SKU:3846
In StockSatin finish alloy. Adjustable rod ends allow precise preloading -
Front Strut Brace Porsche 996 & Boxster S Carbon Fiber Fits Porsche Turbo C4S
SKU:00556
In StockThis EuroCupGT carbon fibre strut brace is more rigid & significantly lighter than the steel ones. It is fully adjustable to make fitting easy. All parts required to fit are included. The overall weight is around 900g -
Lower Wishbone Control Arm Adjusting Shim 10mm GT3 / RS Coffin Arm 1997-On
SKU:996.341.543.95
In Stock -
Lower Wishbone Control Arm Adjusting Shim 1mm GT3 / RS Coffin Arm 1997-On
SKU:996.341.543.90
In Stock -
Lower Wishbone Control Arm Adjusting Shim 2mm GT3 / RS Coffin Arm 1997-On
SKU:996.341.543.33
In Stock -
Lower Wishbone Control Arm Adjusting Shim 3mm GT3 / RS Coffin Arm 1997-On
SKU:996.341.543.92
In Stock -
Lower Wishbone Control Arm Adjusting Shim 5mm GT3 / RS Coffin Arm 1997-On
SKU:996.341.543.99
In Stock -
Lower Wishbone Control Arm Adjusting Shim 7mm GT3 / RS Coffin Arm 1997-On
SKU:996.341.543.93
In Stock -
OEM Porsche Tow Strap Required for All Track Days & Motorsports ( Must Be Red )
SKU:18895
In StockOEM Race part for all cars 1982 -Onwards Length; 75mm through bumper boss + strap (90mm long) -
OEM Porsche Tow Strap Required for All Track Days & Motorsports ( Must Be Red )
SKU:18896
In StockOEM Race part for all cars 1982 -Onwards Length; 40mm through bumper boss + strap (75mm Long ) -
RSR IROC Bonnet Boot Engine Lid & Bumper Retaining Pin Kit All Models ( 2 )
SKU:Bonnet Pin Kit
In StockBonnet Boot Engine Lid & Bumper Pin Hold Down Kit. 2x lightweight threaded Billet aluminum dome pins. 2x flush mount Delrin receiver discs. 2x locking pin clips and Nuts. -
Semi Solid Engine Mountings Porsche 964 993 996 997 TurboGT3 Boxster Cayman Pair
SKU:SR135
In StockBy using computer engineering and digital design STOMSKI RACING has developed the FIRST truly symmetrical 911 Semi-Solid Engine/Transmission Mount, thus allowing you to run stiffer mounts without sacrificing comfort or ride quality. Our symmetrical design allows you to custom tune your ride- determining feel, function, and fun. Because our SS mounts are SYMMETRICAL, you can now properly use them either as an engine mount OR inverted as a transmission mount on Boxster & Cayman models. Unlike other non-symmetrical SS mounts, there is no compromise when using SR135 inverted as a transmission mount because SR135 is symmetrical and thus FULLY supports and FULLY absorbs in BOTH positions/directions. Road tested and track proven, STOMSKI RACING's SR135 provides better shifting, better weight transfer, better handling, crisper throttle response, better acceleration, and of course GREAT looks, without any loss of comfort. Mounting comes complete with an aluminium housing, stainless steel sleeve and disks spacers & a M12 Schnorr washer. Sold as 1 Pair (2x Mountings) -
Side Mounts EuroCupGT-Pro Race Seat (Pair) All Recaro & EuroCupGT Seats
SKU:18949
In StockEuroCupGT-Pro ADJUSTABLE RACE SEAT BRACKETS. These seat frames have been developed specially for maximum strength, rigidity and longevity. ( one Pair / Seat ) Can Be Solid Mounted to Floor or mounted to Porsche or EuroCupGT seat Runners. Fits All; GT3, GT4, Recaro, Sparco, OMP & EuroCupGT Seats. -
Zunsport Grill Set of 3 parts Stainless Steel Porsche 986 Boxster & 3.2 S Black
SKU:ZUN986SBLK
In StockGives stylish look to the front of the car but also provides protection against ingress of damaging road debris & leaves. Clipping system providing a safe and secure installation takes about 30 mins to fit For Models with centre radiator grill. 1997 to 2002